35W Green laser

Green laser is perfect for glass marking, thin film etching and surface treatment for most of the metals and non-metal materials, such as removing the oxide layer from the metal surface.

  • 3d crystal laser subsurface engraving machine
    3d crystal laser subsurface engraving machine-532nm green laser
    3d crystal laser subsurface engraving machine-532nm green laser Excellent III 532 series green DPSS laser, developed and produced by RFH, covers 18w-35w in laser power with short pulse width (<7-8ns@40K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). It is particularly suitable for drilling and scribing in ceramics, marking, cutting and drilling in glass & wafer and surface treatment in most of the metal and non-metal materials. 
    3d crystal laser subsurface engraving machine
  • green laser 3d glass etching
    5w 10w green laser for 3d glass etching
    5w 10w green laser for 3d glass etching   S9 series green DPSS laser, developed and produced by RFH, covers 5w/10w in laser power with short pulse width (<14ns@30K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). It is particularly suitable for drilling and scribing in ceramics, marking, cutting and drilling in glass & wafer and surface treatment in most of the metal and non-metal materials. 
    green laser 3d glass etching
  • green laser engraving glass
    RFH 5w green laser engraving glass bottle
    The RFH green laser emits ultra-high-energy laser beams to scratch the glass surface. During the process, the glass surface will not be broken due to the sudden impact of the laser beam. The reason is that the thermal effect of the UV laser radiation engraving is basically zero.
    green laser engraving glass
  • 5W green laser engraving glass
    RFH 5W green laser engraving glass without causing deformation
    Through the introduction of a friend, I learned that the RFH S9-532 green laser is very effective in marking glass, so I ordered one from us to go back and try the effect. After using our laser, Mr. Chen said that they The workers in the factory have a small heat-affected zone during processing, which is very suitable for their laser application needs, and there will be no burning or deformation.
    5W green laser engraving glass
  •  532nm green laser cuts glass
    RFH 532nm green laser cuts glass with smooth edges and no cracking
    The cutting of RFH green laser adopts non-contact cutting, and the cutting is completed by moving the high-energy light spot on the glass surface. It is worth mentioning that although the energy of the RFH green laser beam is extremely high, since the thermal effect is zero, it will not cause damage to other parts, allowing the glass cutting process to reach a balance.
     532nm green laser cuts glass
  • green laser cutting glass
    RFH 35watt high power green laser cutting glass with smooth edges
    RFH 35watt high power green laser cutting glass with smooth edges   Expert III 532 series green DPSS laser, developed and produced by RFH, covers 35w in laser power with short pulse width (<25ns@50K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%).It is perfect for glass marking,thin film etching and surface treatment for most of the metals and non-metal materials, such as removing the oxide layer from the metal surface
    green laser cutting glass
  • 3D internal engraved crystal
    RFH green laser for 3D internal engraved crystal
    Mr. Liu from Zhejiang recently purchased and ordered an RFH green laser, which was installed on the machine for precise internal carving of crystals.
    3D internal engraved crystal
  •  laser cutting mobile phone tempered glass film
    RFH 532nm green laser cutting mobile phone tempered glass film
    RFH green laser is at the forefront of the industry in tempered film cutting, and has formed its own mature technology system. Through the non-contact cutting method, the emitted light spot only needs to move on the surface of the tempered film, and the low-temperature cold light source can be used for cutting. It only takes a few seconds to cut a tempered film, which greatly improves the production efficiency. , completely in line with Mr. Liu's demands. After visiting RFH's production line for cutting mobile phone tempered film, Mr. Liu quickly ordered a batch of green lasers and put them into production quickly, meeting the company's large-scale orders for tempered film.
     laser cutting mobile phone tempered glass film
1 ... 7 8 9 10 11 ... 31

A total of 31 pages

Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact