It can be seen how important a good laser product is for marking on transparent plastic materials. Shenzhen RFH has such a laser, it is a series of ultraviolet lasers, the power is divided into 3W, 5W, 10W, which can meet the standard requirements of various hardness and materials. Compared with similar products, this unqualified laser is smaller in size, more refined in design, and more stable in light output.

RFH has a high-power UV laser that can lightly mark fragile materials such as ceramics and glass. This high-power UV laser has superior beam quality, and its accuracy and safety are strictly guaranteed in all frequency ranges. The pulse width is less than 20ns@30k, and the heat-affected area is small during processing, which can protect the product from being damaged to the greatest extent. Loss, and can easily complete the marking process.

In the past, when processing easily deformable materials such as plastics, lasers were difficult to be the first choice. However, with the gradual maturity of ultraviolet laser technology, lasers are also the first choice for plastic cutting.

RFH has been cultivating laser technology for fifteen years. It has excellent laser technology and a rich product line. According to market development needs, RFH Laser's newly launched S9355nm UV Ultraviolet laser is a 355nm UV Ultraviolet laser with different powers from 3-10W. Series of products, the split machine includes water-cooled and air-cooled two. Compared with the same type of products, this series of products has the characteristics of smaller size, more refined design, and more stable light output. The small and exquisite design means that the user does not need to enlarge the optical path, which can greatly reduce the cost and save space, and it can be easily installed in the field of flying marking equipment.

The marking process on PE film seems to be common, but in fact, to fully meet the requirements of manufacturers and customers, it still needs service providers with many years of R&D and production experience in laser technology and equipment design.

RFH Ultraviolet UV 355nm Laser Source is the result of RFH's continuous progress and innovation for many years. It emits a laser cold light source to carve on the plastic surface to obtain the required graphics and text. RFH Ultraviolet UV 355nm Laser Source can be connected with computer equipment, draw the desired graphics through software, and turn the drawings into reality through simple software settings.

The PCB board is currently an important chip and hardware undertaking board in the market, and its area used in electronic equipment is different, resulting in a great difference in the size of its internal marking. Under the recommendation of his peers, Mr. Liu, a PCB board manufacturer, recently came to RFH and visited the whole process of RFH UV laser production.

Due to the very small size of the IC card, even the most basic cutting and marking are extremely demanding. This IC card, which is about the size of a fingernail, integrates a large number of precision circuits inside. Cutting and marking were high-end technologies back then, so the price of IC cards used to be very high.