RFH has been cultivating laser technology for fifteen years. It has excellent laser technology and a rich product line. According to market development needs, RFH Laser's newly launched S9355nm UV Ultraviolet laser is a 355nm UV Ultraviolet laser with different powers from 3-10W. Series of products, the split machine includes water-cooled and air-cooled two. Compared with the same type of products, this series of products has the characteristics of smaller size, more refined design, and more stable light output. The small and exquisite design means that the user does not need to enlarge the optical path, which can greatly reduce the cost and save space, and it can be easily installed in the field of flying marking equipment.

The marking process on PE film seems to be common, but in fact, to fully meet the requirements of manufacturers and customers, it still needs service providers with many years of R&D and production experience in laser technology and equipment design.

RFH Ultraviolet UV 355nm Laser Source is the result of RFH's continuous progress and innovation for many years. It emits a laser cold light source to carve on the plastic surface to obtain the required graphics and text. RFH Ultraviolet UV 355nm Laser Source can be connected with computer equipment, draw the desired graphics through software, and turn the drawings into reality through simple software settings.

The PCB board is currently an important chip and hardware undertaking board in the market, and its area used in electronic equipment is different, resulting in a great difference in the size of its internal marking. Under the recommendation of his peers, Mr. Liu, a PCB board manufacturer, recently came to RFH and visited the whole process of RFH UV laser production.

Due to the very small size of the IC card, even the most basic cutting and marking are extremely demanding. This IC card, which is about the size of a fingernail, integrates a large number of precision circuits inside. Cutting and marking were high-end technologies back then, so the price of IC cards used to be very high.

Cut the silicone, use RFH UV laser. Ultraviolet laser is RFH. Based on laser research and development for more than ten years, laser is designed for a variety of materials. The repetition rate of laser cutting is higher and the frequency is variable. While realizing efficient processing, there are multiple functions.

Today, R & D personnel of brand -branded companies in the country came to RFH to visit and praised the effect of RFH 355nm UV Pulled Lasers Source for PVC medical pipe punching.

Kary came from Germany to RFH to inspect the 355nm DPSS Ultraviolet Laser plastic paint process. For Mr. Li, there are two main demand for plastic lacquer. One is that it needs to be transmitted without hurting the bottom. These two requirements can be easily achieved in the design system of RFH 355nm DPSS Ultraviolet Laser.