3W,5W,10W uv laser

What materials can be marked by UV laser marking machine

Mar 10 , 2021

What materials can be marked by UV laser marking machine

The UV laser marking machine is a technology very different from CO2 and Fiber laser technology. Today we are going to explain the main differences between this technologies.

uv laser

Cold laser engraving

 

Also knows as the blue laser beam, this technology has the capacity of engraving with a low rate of heat. The light wave or UV light spectrum of this machine is one of the main reasons this technology can engrave over different materials because it doesn’t heat the material surface as the Fiber and the CO2 does. It allows the UV laser mark clear and with high precision over all the plastics and other materials that have an adverse reaction with heat.

 

Plastics

 

There are thousands of different mix of plastics, and all of them can be engraved for UV laser technology, these are some of the most common plastics engraving with our laser engraver machine.

 

 

Polyethylene (PE)

Polyvinyl Chloride (PVC)

Polypropylene (PP)

Polystyrene (PS)

Polylactic Acid (PLA)

Polycarbonate (PC)

Acrylic (PMMA)

Acetal (Polyoxymethylene, POM)

Nylon (PA)

ABS (Acrylonitrile Butadiene Styrene)

Other Plastic not mention here.

Metals

 

The UV laser it can engrave and mark metals, but not always with the same effect as the fiber laser engraver machine. While a fiber laser can etch over the metal surface with deep effect and with a clear result, the UV laser has problems engraving metals covered with painting, or metals highly reflective like the copper. Check below the list of metals that the UV laser can engrave.

 

Aluminium 

Gold

Platinum

Silver

Titanium

Brass 

Stainless steel

Crome

Wood

 

The UV laser is a full crossover technology, ideal for overall engraving plastics and some common metals. However, one of the significant advantages of this machine comes at the time to engrave some non-metal materials like wood. This machine can make amazing engravings on different wood surfaces. It can’t make deep and fast etching as a CO2 galvanometer laser, but it can produce a light and beautiful marking result.

 

Mahogany

Walnut

Oak

Ash

Birch

Maple

Cherry

Pine

Spruce

Cedar

Fir

Larch

MDF

Plywood

Fibreboard

Garments

Our UV laser machines also can engrave some garments, especially if the garments are rich in synthetic fibers. However, if you want to engrave in specific clothing, we can run a test to check the engraving results before you purchase our machine.

 

Glass

 

The UV laser is one of those technologies that can engrave over glass surfaces without a break or overheat the material. You can create amazing engravings and patterns without splinter glass result. 

 

 

Paper and cardboard

 

The engraving of cardboard also depends on the material, and the result is different from the usual engraving of the CO2 machines. While the CO2 machines carbonize the surface of the carboards or paper materials, the UV generate a chemical reaction making a marking over the material surface, it is for that reason that we can engrave with white color over cardboard surfaces, and if we want to engrave on black cardboard, we still can get clear contrast, If you have more questions about the engraving of this material, get contact with us. 

Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact