-
The steps to solve the high temperature of green laser marker
Aug 12 , 2021
The steps to solve the high temperature of green laser marker During the operation,If the software warns “IPG Laser :over temperature” and the next step cannot be performed. We need to confirm the cause of the failure from circuits, connecting lines, and power. The solution is simple, please watch carefully. uv laser | green laser | Ultraviolet lasers |&...
view more
-
Uv 3d laser machine How to replace the galvo head and F-theta lens?
Aug 12 , 2021
Uv 3d laser machine How to replace the galvo head and F-theta lens? The galvo head and F-theta lens are one of the most important components of the laser marking machine. They are often applied to laser operations at 1064 nm (YAG), 10640nm (CO2), 532 nm (green), and 355 nm (UV). uv laser | green laser | Ultraviolet lasers | uv dpss laser | nano...
view more
-
UV Laser Diode How to solve “abnormal sound of the galvo head and the red light beats frequently”
Aug 12 , 2021
UV Laser Diode How to solve “abnormal sound of the galvo head and the red light beats frequently” As a modern precision machine, laser equipment is characterized by high precision, high technology and automation. However, improper daily operation will also cause damage to the machine and cause various problems. When we encounter the situation that “abnormal sound of the ga...
view more
-
Solid green laser source Laser Equipment Winter Maintenance Tips
Aug 12 , 2021
Solid green laser source Laser Equipment Winter Maintenance Tips In the winter, the temperature is declining. At this time, we should not only warming ourselves, but also do freeze protection for laser machines to ensure the lifetime of the equipment and reduce the risk cost. As we all know, liquids have a “freezing point”. When the temperature of the liquid is lower than...
view more
-
High-Power 355 nm Ultraviolet Laser Effect comparison of different filling methods
Aug 12 , 2021
High-Power 355 nm Ultraviolet Laser Effect comparison of different filling methods In the process of laser marking, we fill the specified graphics or text to make the laser mark the best effect on a specific material. Next, we will compare and present from multiple angles such as type, line spacing, number of times, and margin. uv laser | green laser | Ultraviolet lasers...
view more
-
The steps to solve the high temperature of Uv 3d laser machine
Aug 12 , 2021
The steps to solve the high temperature of Uv 3d laser machine During the operation,If the software warns “IPG Laser :over temperature” and the next step cannot be performed. We need to confirm the cause of the failure from circuits, connecting lines, and power. The solution is simple, please watch carefully. Watch the video uv laser | green laser | Ul...
view more
-
The New Technology Application Of The Medical Industry–355nm uv Laser
Aug 11 , 2021
The New Technology Application Of The Medical Industry–355nm uv Laser At present, Chinese anti-epidemic prevention and control operations have won periodic victories, but supplies of masks, protective clothing and other materials are still in short supply. The demand of special production equipment for protective products are increased quickly , and manufacturers all over the country ...
view more
-
How to replace the 5 Watt uv laser tube and power supply
Aug 11 , 2021
How to replace the 5 Watt uv laser tube and power supply In the process of using laser cutting machine, it will encounter many problems. As the main parts of the machine, the laser tube and power supply require frequent maintenance and cleaning. Next, we will explain the replacement of the laser tube and power supply. Watch the video Before replacing the laser tube and power s...
view more
-
How to solve the problem of 532nm dpss laser cutting failure?
Aug 11 , 2021
How to solve the problem of 532nm dpss laser cutting failure? The laser cutting machine can produce exquisite objects through its own energy. But long-term use of the cutting machine will cause failures. Through the video, we can see that the cutting machine failed to cut the material during the operation.Next, we solve the problem in turn. 1、Adjust software parameters 1. Adju...
view more
