Green laser source cuts the plastic nozzle, smooth and high efficiency!

Nozzle refers to the joint between the frame and the parts formed when the factory casts the model. Also known as "soup mouth" (gate), it is also the extra scraps on plastic products. Nowadays, almost all industries use plastic products, leaving behind the scraps brought by the mold during production. Before processing the finished product, the nozzle on the edge of the part needs to be cut beautifully and neatly.

532nm laser cutting machine cuts the leftover material

The laser cutting machine is used to cut the leftover material, which greatly improves the aesthetics and neatness of the product. Make the product perfect. The cutting principle is that the horizontal laser beam emitted by the laser turns into a vertical downward laser beam through a 45° total reflection mirror, and then is focused by a lens to form a very small spot at the focal point. When the light spot irradiates the nozzle, the nozzle is quickly heated to the vaporization temperature and evaporates to form a hole. According to the shape requirements of the nozzle to be processed, as the beam moves to the nozzle, the hole continuously forms a slit with a very narrow width to complete the cutting of the nozzle.

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

Laser cutting incision is smooth and flat

Because of the different plastic products, the shape, size, and specifications of the nozzles are different, which requires very high cutting. The traditional electric shears have low cutting accuracy and low efficiency. The use of laser cutting will not have these problems. Laser cutting uses an invisible beam to replace the traditional mechanical knife. It has the characteristics of high precision, fast cutting, not limited to the limitation of the cutting shape, low processing cost, etc., and the incision has no mechanical stress. , The cut is smooth and flat; it is safe and environmentally friendly and saves materials.