How to complete batch marking on a flying 5W UV cold light source laser marking machine

Speaking of flying laser marking machine, we think of assembly line. Flying laser marking machine is a laser device with fast marking in laser equipment. The reason is that it can be marked in flying marking mode. One assembly line is equivalent to several robots. How to realize the marking of the industrial marking and flying marking mode so fast.

Flying UV laser marking machine

The principle is actually very simple. The flying laser marking machine combines itself with other equipment to complete a series of tasks. It can help him, for example, the assembly line workbench. The working principle of this fully automatic workbench is very simple, but it starts in it. It has a big effect. It is not enough to have an assembly line workbench. It can bring things over but the machine doesn't know it. Therefore, sensors are needed to sense the passing of the objects, and then they will be sent to the system to initiate marking. The assembly line is very fast. The marking speed of the laser itself is already fast enough, and then adjusted to the flying mark mode, it can fully adapt to the speed of the assembly line workbench.

Laser equipment is easy to automate

We often say that laser equipment is easy to automate. This method is also semi-automated. If we use another arm robot to continuously move to the assembly line room product, this speed will be faster. Of course, we use different auxiliary tools in combination with the product. If we say usb , Vibration plate can be used completely, wine bottles can be carried out in an assembly line according to production to marking, and marking of production date and marking can be completed in one step.

UV laser marking machine

The flying mark mode is not fixed in the data adjustment, and the sensor placement position is not fixed. It needs to be determined according to the product. For example, the same product is marked in the middle position at first, and then it needs to be marked in the side position. You need to move the sensor to achieve this. The marking of the same product does not need to be too obvious at the beginning, and later it needs to be more obvious. Then the power frequency and so on may need to be adjusted, and even the speed of the conveyor belt needs to be adjusted accordingly.

uv laser | green laser | ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

RFH 355nm UV laser

After the parameters are adjusted, a continuous marking action can be completed. This kind of marking speed is faster than manual. Due to the stability of the laser marking machine, the position of each marking is very accurate as long as the sensor does not move. There may be deviations in position marking, and of course it is to save labor costs in the end. A machine is equivalent to an assembly line work, and the labor cost can be imagined.