Maintenance and maintenance of 3w and 5w UV laser and green laser

For UV laser marking machines, 3w and 5w are two common equipment models. 3w and 5w UV laser marking machines are constantly developing, but their long-term use will also cause some damage, which is also a common fault of every kind of machine, but if we do good maintenance and maintenance , it will not be so easy to damage the machine, so in the process of machine application, if there are some common faults, we need to do some appropriate operation methods to maintain the machine.

Next, let's talk about the maintenance of 3w and 5w UV laser marking machines. They are equipment and machines for industrial production. In short, these are still essential. If the maintenance work is done well, it can be well improved. The life of the machine can also reduce the occurrence of failures during the normal working process of the machine, thereby improving our work efficiency.

First of all, when we use the machine, we must pay attention to whether the height of the lifting mechanism slide rail on the working table has changed. If there is, we must remember to adjust it to the correct height. In addition, we Before use, the scene should be cleaned according to the correct method. It is recommended to use some small towels dipped in ethanol for cleaning, and wipe it in one direction. Next, it is the main box of the UV laser marking machine. The main box is a Very important parts, the box needs to be cleaned regularly. The manager can blow it along the sub-pipe level. Remember, do not use water to clean it, because there are still circuit boards in it, and it will be bad if it causes a short circuit.

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

In addition, before we start the machine, we need to check whether our mobile phone settings have changed. We must follow the instructions and the correct process for actual operation. During the operation of the UV laser marking machine, we must pay attention to it. If the power supply and wires are damaged, if such a phenomenon occurs, be sure to avoid repairing the power supply and wires first, and carry out work, otherwise it will also cause a short circuit or even more serious disasters.

Then there is the server computer. Many people in this place will ignore cleaning, but it is often necessary to clean up. During the cleaning process, try to use one hand to work, so as to prevent the current and your body from creating a flow loop, causing yourself In case of physical damage, we usually check the condition of various parts of the machine, including the operation of display lights and hot fans. If the equipment is found to be faulty, it must be dealt with in time.