3W UV laser marking machine will not burn the plastic when marking on the plastic

UV laser marking machine is no longer unfamiliar to many people, and some weird problems will also occur, because it will have some failures, including one problem. UV laser marking machine performs marking on plastic. The pattern, will the plastic be damaged?

The UV laser marking machine is actually not harmful to plastics, because its power is not a particularly high parameter. As long as the staff adjusts it appropriately, it will only evaporate the surface of the plastic little by little without damaging the plastic. A quality of its own, but some plastics that are easily damaged have poor tolerance.

UV laser marking machine

If you want to test which plastic can be marked with a UV laser marking machine, you may need to perform repeated experiments, but it is generally possible. As long as you try a few more times, the power is still up to the standard speed and Frequency and the like are adjusted to the most suitable position, so that there is an obvious parameter, the success rate will be higher, and don’t be impatient, this thing is very patience, or you can find a professional. After I help you adjust the appropriate parameters, perform self-registration. Remember this parameter, it will be more convenient when you use it later.

Laser marking is semi-permanent

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

There is another question, you may be more confused, that is, when the UV laser marking machine is marking plastics, can the mark and mark be wiped off, but generally speaking, it cannot be wiped off, because laser marking is Semi-permanent, unless you draw the first layer directly, it is more difficult to remove. In addition, the products marked by the UV laser marking machine are the colors of the products and the original materials, if it is stainless steel and For iron-based metal substances, the parameters need to be adjusted relatively large to show various colors. When the parameters are relatively small, the color will not appear.

The UV laser marking machine can meet the standards on plastics

In short, the UV laser marking machine can reach the standard on plastics. As long as the parameters and various configurations are adjusted, the plastic will not be damaged in general. Secondly, our UV laser marking machine can also be used on many types. Marking on materials is also widely used, and many manufacturers are very satisfied with efficiency and quality.

The above content is an explanation about marking on plastic by UV laser marking machine, and some other content is also mentioned. I hope that it will be helpful to everyone. It will not be too confused when using it, and it will be more clear. Use the machine.