How to maintain and maintain 15W high power green laser marking machine

With the development of science and technology, the popularization of laser technology, more and more production and processing enterprises will use laser marking machines to complete the marking requirements. However, if the laser marking machine is to work smoothly and increase its service life, it is necessary to carry out corresponding actions on a regular basis. Maintenance and maintenance, how to maintain and maintain the laser marking machine, let's take a look at it together.

532 Green Laser Marking Machine

How to maintain and maintain the laser marking machine starts with the parts. The galvanometer in the laser marking machine has relatively high requirements. Keep away from some items with strong magnetism and strong electricity during use. Do not directly contact the galvanometer. If there is dust on the galvanometer and you want to process it, you need to Use a clean cloth with alcohol to process the galvanometer. When handling, pay special attention to wiping in one direction to avoid wiping back and forth. The laser in the laser marking machine should regularly clean the dust according to the time in the instruction manual. You can use an air gun to blow in the direction of the air duct and blow off the dust on the circuit board in time. The safety of the laser marking machine must not be neglected. Every time before use, check whether the grounding is very firm, whether the socket and power cord are complete, whether the fan is running normally to dissipate heat, and if there is a problem, it should be replaced in time to prevent leakage accidents. If it happens, it affects the safety of the staff. At the same time, it is necessary to reserve lubricating oil. The movable parts in the laser marking machine can be added at a monthly frequency to increase the lubricity and ensure the efficiency of marking.

Before using the laser marking machine, check whether the software that has been set up before has changed

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

Before using the laser marking machine, check whether the software that has been set up has changed, whether the function buttons are missing, whether the indicator light is normal, etc., and make sure everything is normal before starting. After use, first turn on the laser power. Turn off and then turn off the marking software. Clean with a clean cloth, especially the computer control surface and workbench, etc. The garbage must be cleaned up in time, especially the metal powder remaining in the marking of the equipment. , Clean the sanitation around the equipment to ensure the ventilation of the environment. In addition, the circulating water must be replaced at a weekly frequency, because the circulating water will have a great impact on the laser marking machine for a long time. It is recommended that the water temperature be controlled below 35 degrees Celsius. If the frequency of use is relatively high, it should be Increase the frequency of replacement.

RFH green laser

After the introduction of this article, I believe everyone has an understanding of how to maintain and maintain the laser marking machine. Although the laser marking machine has brought a lot of profits to the enterprise and improved efficiency, everyone should not neglect the maintenance and maintenance of the equipment.