How to adjust the marking depth of the green laser marking machine

As we all know, laser marking machines are very popular in the market. They can not only help companies imprint on products and play an anti-counterfeiting role, but there are many laser marking machines that have relatively low definition of imprints, which can be used by counterfeiters. Let’s take a look at how to adjust the marking depth of the laser marking machine.

Green laser marking machine

The position of the laser in the laser marking machine is very central, just like the engine is the core component of the car. It can directly increase the power of the laser to achieve the density of the adjustment depth. The quality of the laser can be improved by the improvement of the laser beam. The laser power will also be increased, and the effect can be achieved quickly and immediate results. In addition, the corresponding supporting parts must be upgraded while upgrading the laser, which will increase the equipment procurement cost of the company. It can also be performed by the field mirror of the laser marking machine Change the way to adjust the marking depth, you can change the large field lens into a small one, and a small field lens can deepen the laser marking machine's rays, and the markings will also deepen. If you have used 200 The field lens is now replaced with a 100, and the depth of the marked logo will be more than twice as deep as before. In specific situations, you can change the field lens and test it until you get the results you are satisfied with.

If the laser marking machine adjusts the marking depth, it can also adjust the beam

If the laser marking machine adjusts the marking depth, it can also adjust the beam, mainly by adjusting the laser gun and replacing the light guide material. It can also upgrade the output mirror or the laser full mirror, and the common laser marking machine adds After the small hole is installed, the configuration of the laser gun will be upgraded and improved to reduce the impact on the equipment. Sometimes the laser marking machine with the same power and the same parameters has different speeds. The markings are also different. Set the speed of the laser marking machine to slow, and let it slow down. After restarting, it will be more Deepened.

Replacing the accessories of the laser marking machine will also adjust the marking depth

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

Replacing the accessories of the laser marking machine will also adjust the marking depth. Many companies will choose a higher quality laser set to replace the original laser. Now it is also the choice of many people to use a beam expander, and the laser focus will be stronger. , The emitted spot will be deeper, and the depth of the engraved object will be deeper. If you need it, you can also choose a foreign imported Q switch, so that the depth of the imprint will be stronger.

How to adjust the marking depth of the laser marking machine

Regarding how to adjust the marking depth of the laser marking machine, I believe everyone has already understood after the introduction of this article. The laser marking machine can adjust the marking depth by several methods introduced in this article. If the desired effect cannot be obtained, it is recommended that you change the brand of the laser marking machine, so as not to give any opportunity to counterfeiters.