Green laser is perfect for glass marking, thin film etching and surface treatment for most of the metals and non-metal materials, such as removing the oxide layer from the metal surface.
The high power green laser source is a drilling device that uses an extremely small spot. The high-quality beam and small spot size enable it to meet the ultra-fine marking requirements of glass products. The high repetition frequency nanosecond green laser of RFH Laser Co., Ltd. , can perform various types of fast finishing on thin glass and tubular glass of various materials. Nanosecond green light glass drilling equipment has been used in the processing of soda lime glass, borosilicate glass, quartz glass and other glass deep processing fields. success case,
green-laser-engraving
Some photos as a memory carrier are usually engraved inside the crystal and glass cube. The 3d crystal laser engraving machine, although for the 2d image, it can transform it into a 3d model to provide instruction for the laser beam.
To make all this work, we need a “green” laser. Like a fiber laser, these are solid state, pulsed lasers but green lasers work at a wavelength of 532nm (nanometers) as compared to a fiber laser with a wavelength of 1062nm (about twice as long as a green laser) or a CO2 with a wavelength of 9.4-10.6µm (micrometers), or 10,600nm, which is substantially longer yet. This illustrates the uniqueness of a green laser compared to the lasers most of us have.
35w green laser cutting or drilling on glass
Expert III 532 series green DPSS laser, developed and produced by RFH, covers 35w in laser power with short pulse width (<25ns@50K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%).It is perfect for glass marking,thin film etching and surface treatment for most of the metals and non-metal materials, such as removing the oxide layer from the metal surface
Recently, Mr. Huang, a jewelry processing manufacturer from Zhejiang, came to RFH and brought jewelry samples that need to be marked. He hoped to use RFH green lasers to try the samples.
The RFH green laser has unique insights in cutting tempered glass film. The non-contact cutting method only needs to move the emitted light spot on the surface of the tempered glass film to allow the low-temperature cold light source to cut. It only takes a few seconds to cut a tempered glass film, which greatly speeds up the entire production line. .
Fortunately, they soon learned that a high-power green laser from Shenzhen RFH is very good at this operation. Whether it is metal or non-metallic materials, this professional high-power green laser can complete the engraving process with ease. Mr. He also said that the reason why he trusts RFH so much is that RFH’s business philosophy is very similar to that of their own factory, and they are willing to spend everything on one thing. It has been 15 years since RFH has been studying laser technology. I will know in a long time.
