10W-15W uv laser

Expert III 532 Green laser 35W

Expert III 532 series green DPSS laser, developed and produced by RFH, covers 35w in laser power with short pulse width (<25ns@50K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%).It is perfect for glass marking,thin film etching and surface treatment for most of the metals and non-metal materials, such as removing the oxide layer from the metal surface

  • Laser Wavelength:

    532nm
  • Average Output Power :

    35W @50kHz
  • Pulse Width:

    <25ns @50kHz
  • Pulse Repetition Rate :

    10-200kHz
  • Spatial Mode:

    TEM00
  • Beam Quality (㎡) :

    <1.2
  • Beam Diameter:

    1.0±0.2mm Measured at window
  • Beam Full Divergence Angle :

    <1.2mrad
  • Beam Circularity:

    >90%
  • Pulse-To-Pulse Stability:

    <2% RMS/@30kHz
  • Average Power Stability :

    <3% RMS/8hr
  • Beam-Pointing Drift:

    <30μrad/℃
  • Polarization Ratio:

    >100:1
  • Polarization Orientation:

    Horizontal
  • Operating Temp. & RH:

    10℃ to 35℃ | <80%
  • Storage Temp. & RH:

    -20℃ to 65℃ | <90 %
  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase
  • Power Consumption:

    <800W
  • Warranty :

    18months
  • Product Detail
  • Video

uv laser

Expert III 532 series green DPSS laser, developed and produced by RFH, covers 35w in laser power with short pulse width (<25ns@50K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%).It is perfect for glass marking,thin film etching and surface treatment for most of the metals and non-metal materials, such as removing the oxide layer from the metal surface

green laser

 

Expert III 532 series uv laser characteristics:   

1. 532nm output wavelength, 10 to 200 Hz repetition rate; laser power is 35w; Continuous tuning of repetition rate while maintaining constant pulse energy, superior beam pointing and energy stability make the Expert III 532 the first choice for micromachining, marking and thin film removal applications 

 

2. Exceptional beam quality (M²<1.2) ,absolutely assured in all repetition rates; relatively short pulse width <25ns@50K with little heat transfer to surrounding material; perfect beam spot quality(Beam Circularity>90%) 

Close to Gaussian smooth beam profile with low value M² < 1.2 and good focusability are beneficial for applications such as  

 

3. Unique Q-switching technology, adapts a variety of control requirements of laser applications;Online refreshment for harmonic coupling technology;Excellent long term power stability Rugged sealed cavity, Extremely compact size, Simple and robust 

 

4. Digital control technology for the driver,  RS232 control interface ensures easy control and integration with laser marking equipment 

 

5. This laser adopts one - style design with compact and reasonable structure, easy installation. 

Easy to transport and saves space due to compact and light design 

 

Water cooling,cost-effective and reliable end-pumping technology and amplifier-free DPSS design guarantee easy operation and alignment simple installation and low maintenance costs

 

6. Industrial production process control technology,provides quality stable products.

GREEN LASER

GREEN LASER

 

 RFH - The leading industrial solid-state laser manufacturer

 

For over 13 years with excellent long term stability and exceptional good beam quality

 

Production in dust-free plant & rigorous quality control system

From purchasing, pre-production quality check, assembling, finished product testing, warehouse-in inspection, pre-delivery testing to after-sales service, each step is under control to make sure product quality and consistency in both machine parameters and actual running parameters. This is what makes RFH laser lasts longer than its peers. 

RFH LASER

Top professional team, independent R&D in laser oriented power supply control system

 

There is a one-to-one correspondence between power supply and laser. The stability of power supply control system determines if the laser can maximize its performance during operation. RFH Laser has independent R&D in power supply technique which enables timely update and improvement of power supply control system module based on the laser’s need. 12-year experience in R&D and a top professional team make RFH laser a reliable and stable laser system.

green laser

Core components of oversea brands with guaranteed quality

Pumping, Q-switching and other core components adopt oversea brands. Work with top brand component suppliers of home and abroad. Each component is guaranteed with its quality from the beginning of materials purchasing. This is why users can trust RFH laser.  

35W green laser

 

UV laser+power supply+cooling system sold in a group

Being client-oriented, RFH offers proposal of selling the whole laser system in a group so that the laser system can maximize its performance while maintaining its stability. 

35W green laser

 

Full-digital display, supporting communication with computer, capable of laser’s remote control

Each laser developed and produced by RFH can always remain high quality in industrial and extreme conditions of scientific research. With stable beam quality, high efficiency, best cost performance and high reliability, RFH has earned good reputation in different industries at home and abroad. After 12-year development, RFH has become a reputed brand in nanosecond laser industry. 

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

UV LASER

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
RFH
Exper III-Y-532-40-50
Shenzhen RFH Laser Technology Co., Ltd. has launched the new Exper III-Y series green laser in 2024. This series features a water-cooled design and is a medium-power nanosecond pulsed 532nm green solid-state laser. It is specifically designed to meet the needs of high-speed precision laser processing production lines, ensuring efficiency and long-term stability and reliability. With its excellent performance and stability, the Exper III-Y series laser will play a crucial role in the field of precision processing, bringing new technological breakthroughs and application prospects to the industry.  
RFH
tea packaging marking
RFH 355nm UV laser used in tea packaging marking
RFH 355nm ultraviolet laser replaces the traditional ink printing process, widely used in packaging bags, tea gift boxes, ultraviolet laser coding speed, high precision, high power stability   Tuocha is a very old product in Yunnan tea, and it has long been popular in and outside the province. Yunnan Tuo Tea was created in Xiaguan, Yunnan, so it is also known as Xiaguan Tuo Tea. As time goes by, all employees of Xiaguan Tea Factory have developed a small workshop-like factory into a modern tea refining and processing enterprise with a certain scale after decades of hard work.  
tea packaging marking
RFH UV laser marking Iphone12 earphone and charger
RFH UV laser marking Iphone12 earphone and charger
RFH UV laser marking Iphone12 earphone and charger   As a leading solid-state laser manufacturer with 13-year experience, RFH nanosecond solid-state UV laser is applicable to mark on plastic charger with outstanding marking effect.    For plastic charger marking, it is suggested to use RFH S9 series UV laser with excellent marking performance.   A Shenzhen UV laser marking manufacturer saw most of his peers use RFH UV laser. The marking effect of RFH UV laser is excellent. Comparing with oil, RFH UV laser has lower energy consumption, longer life time and is easier to use and widely used on different materials such as various tubes, plastic film, plastic bottle cap and other materials like PPR, PVC and PE. Seeing so many outstanding features of RFH UV laser, he paid a visit to RFH with a sample and ask for proofing.  
RFH UV laser marking Iphone12 earphone and charger
engraving and marking plastics
Ultraviolet solid-state laser engraving and marking plastics transmit light, with clear graphic details
Ultraviolet solid-state laser engraving and marking plastics transmit light, with clear graphic details   With the evolution of the design concepts of various digital products, there are many places that need to be backlit. The most common ones are backlit keyboards, backlit keys and some small indicator lights. With such a subtle design change, the experience of a variety of products has undergone qualitative changes. To achieve this function, it is inseparable from the credit of the laser marking machine.    
engraving and marking plastics
Engraving Crystal Glass
RFH High-Power Green Laser Shows the Mystery of Engraving Crystal Glass
RFH High-Power Green Laser Shows the Mystery of Engraving Crystal Glass   Crystal is a kind of jewelry that can have different colors and can exude brilliant brilliance. It is also a limited and precious treasure given by the earth. Therefore, crystal has always been welcomed by many people, and its carving is also quite particular. . In the past, the engraving of crystals, whether natural or artificial, used more complex methods, but today with green lasers, its processing has become more simple.
Engraving Crystal Glass
uv laser engraver for PC/ABS plastic
Vietnam customer buying RFH 3w 5w uv laser engraver for PC/ABS plastic
In a world where creativity knows no bounds, the demand for cutting-edge laser technology continues to soar. It is in this dynamic landscape that the adventurous spirit of a Vietnam customer shines forth, as they embark on a journey to discover the untapped potential of the RFH 3W 5W UV laser engraver for PC/ABS plastic.  
uv laser engraver for PC/ABS plastic
peels paint on the fan button
RFH 355nm UV laser peels paint on the fan button, beautiful and neat
RFH 355nm UV laser peels paint on the fan button, beautiful and neat Fans play a beautiful role in bringing coolness in early summer and late summer, bringing bursts of coolness with the rotating fan blades and blowing away the trace of heat. In addition to controlling the switch, the button for the electric fan can also adjust the wind power to meet the needs of different conditions. So, how to peel off the paint nicely and neatly on the buttons of the fan?
peels paint on the fan button
Ultraviolet (UV) laser source drilling FPC flexible circuit board
Ultraviolet (UV) laser source drilling FPC flexible circuit board
Ultraviolet (UV) laser source drilling FPC flexible circuit board
Ultraviolet (UV) laser source drilling FPC flexible circuit board
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact