10W-15W uv laser
  • 355nm UV pulsed lasers Lift Off of Polymer on Glass
    Jan 03 , 2023 355nm UV pulsed lasers Lift Off of Polymer on Glass
    The basic concept behind laser lift off is the difference in absorption of the laser light by one layer, typically a host substrate, and the filmstack being separated. In the case of LEDs for example, the GaN epi layer has a band gap of about 3.3 eV whereas the sapphire band gap energy is ~ 9.9 eV. Short wavelength laser light passes through the sapphire, and ablates the      interf...
    view more
  • RFH 50W infrared laser cuts thin copper sheets, smooth edges, no burrs
    Jan 03 , 2023 RFH 50W infrared laser cuts thin copper sheets, smooth edges, no burrs
    RFH 50W infrared laser cuts thin copper sheets, smooth edges, no burrs Copper is a commonly used material in our daily life, and has important applications in many machines and electronic devices. Copper sheets can conduct electricity, easy cut, and cheap to similar products. They are strong and plastic. They are the best manufacturing materials.   At present, the cutting of copper sheets has...
    view more
  • 355nm Ultraviolet lasers excel in large area structuring and 3D micromachining
    Dec 30 , 2022 355nm Ultraviolet lasers excel in large area structuring and 3D micromachining
    355nm Ultraviolet lasers excel in large area structuring and 3D micromachining. Advanced beam illumination and projection techniques allow for sharp-edged and uniform energy density distribution on target. This leads to fine control of the volume of material removed per pulse, enabling high-resolution machining and high-quality surface finish. Typical removal rates What is 355nm Ultraviolet l...
    view more
  • Ultrafine Marking with UV and short pulse duration lasers
    Dec 30 , 2022 Ultrafine Marking with UV and short pulse duration lasers
    Ultrafine Marking with UV and short pulse duration lasers Novel materials and requirements for ultra small marking challenge traditional laser technology where concerns at the micro-scale include quality of the mark to ensure a high level of readability.   Laser  technology is well suited for processing difficult to mark materials including polymers, transparent materials such as glass a...
    view more
  • Germany customer high power green laser cutting or engraving of rubber
    Dec 28 , 2022 Germany customer high power green laser cutting or engraving of rubber
    Rubber is an elastic polymer that can be found in nature in its natural form or artificially produced. Natural rubber is produced from the resin of various tropical trees and a number of other plants. The rubber has great flexibility, high friction coefficient and uniform structure. Synthetic rubber comes in a variety of types, thicknesses, and sizes with varying degrees of difficulty. Each type h...
    view more
  • what is Laser Marking for Plastic
    Dec 28 , 2022 what is Laser Marking for Plastic
    This section describes information ranging from the principles of plastic marking and processing to advantages grouped by laser wavelength. It introduces marking examples and the optimal laser markers for a variety of materials such as ABS, epoxy, and PET.   Plastic marking/processing types Paint peeling Peel the paint or printing on the target surface to bring out the contrast with the colou...
    view more
  • South Korea customer buy 12 units of 355nm uv laser source marking plastic film
    Dec 26 , 2022 South Korea customer buy 12 units of 355nm uv laser source marking plastic film
    South Korea customer buy 12 units of 355nm uv laser source marking plastic film 355nm uv laser is a groundbreaking tool for plastic film processing applications. Packaging, coating, digital converting markets will all benefit from a 355nm uv laser solution. Being a non-contact process, laser is perfect when you have to deal with a base material as delicate as plastic film. It is a non-contact proc...
    view more
  • Customer buy 355nm uv DPSS Laser source engraving and cutting Silicone
    Dec 23 , 2022 Customer buy 355nm uv DPSS Laser source engraving and cutting Silicone
    Customer buy 355nm uv DPSS Laser source engraving and cutting Silicone Silicone is a raw material with great flexibility and excellent resistance to heat and cold, durability in outdoor and sun conditions, and water resistance. It also has a high friction coefficient, is used as an electrical insulator and does not easily stick to other materials, so it is suitable for molds such as baking molds. ...
    view more
  • Paper engraving and laser cutting
    Dec 23 , 2022 Paper engraving and laser cutting
    Paper engraving and laser cutting Cut, mark, create folding lines or give different effects, whether it is to add a strong value to your creation by making it unique, produce a superb announcement, engrave a moment in people’s mind or surprise your followers... Paper engraving becomes one of the most valuable materials after being processed with a laser!   Laser technology is the perfec...
    view more
  • Why do we need UV laser instead of other lasers for silicone cutting?
    Dec 23 , 2022 Why do we need UV laser instead of other lasers for silicone cutting?
    Why do we need UV laser instead of other lasers for silicone cutting?   Silicone is a very common material, I believe everyone has seen it, but have you ever considered what silicone is and how it is processed.   Wondering how RFH laser cuts silicone with ease? Silica gel in the traditional impression has two characteristics, non-toxic, tasteless and soft and skin-friendly, so silica gel...
    view more
  • Cutting FPC circuit board by Compact high energy and repetition rate nanosecond UV lasers
    Dec 22 , 2022 Cutting FPC circuit board by Compact high energy and repetition rate nanosecond UV lasers
    Cutting FPC circuit board by Compact high energy and repetition rate nanosecond UV lasers
    view more
  • Laser etching and engraving glass way
    Dec 22 , 2022 Laser etching and engraving glass way
    Laser etching and engraving are great ways to personalize and create designs on all kinds of glass.   With the advancements in laser engraving technology, such as the rotary axis, it's even possible to work on curved glass surfaces such as bottles and drinking glasses.   The non-contact nature of laser engraving offers several advantages over traditional glass engraving techniques like s...
    view more
1 ... 5 6 7 8 9 ... 51

A total of 51 pages

Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact