10W-15W uv laser
  • Expert III 532 Green laser 35W
    Expert III 532 Green laser 35W
    Expert III 532 series green DPSS laser, developed and produced by RFH, covers 35w in laser power with short pulse width (<25ns@50K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%).It is perfect for glass marking,thin film etching and surface treatment for most of the metals and non-metal materials, such as removing the oxide layer from the metal surface
    Expert III 532 Green laser 35W
  • 532 Green laser 18W-35W
    Excellent III 532 Green laser 18W-35W
    Excellent III 532 series green DPSS laser, developed and produced by RFH, covers 18w-35w in laser power with short pulse width (<7-8ns@40K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). It is particularly suitable for drilling and scribing in ceramics, marking, cutting and drilling in glass & wafer and surface treatment in most of the metal and non-metal materials. 
    532 Green laser 18W-35W
  • 532 green laser is used to laser mark on ceramic knife
    532 green laser is used to laser mark on ceramic knife
    532 green laser is used to laser mark on ceramic knife Using RFH 532nm green laser to laser mark on ceramic knife enables the pattern on it to be very clear and doesn’t affect its normal cutting performance. This maximizes the brand quality and the delicacy of the ceramic knife.   Today, RFH is going to share the case of a ceramic knife supplier whose peer recommends RFH 10W 532nm green laser to him.    As we all know, marking on a ceramic knife adopts a laser marking technique. The whole marking process on the ceramic knife is so simple and generally takes a few seconds to finish. But this seemingly “simple” process needs to be supported by a well-established technique.And that is a laser system with exceptional laser beam quality and its accessories. An excellent laser is the basis of 99% yield of laser marking product and the solid-state green laser produced by RFH with 13-year experience is the perfect example.   
    532 green laser is used to laser mark on ceramic knife
  • RFH green laser is recommended by a peer of a ceramic knife supplier
    RFH green laser is recommended by a peer of a ceramic knife supplier
    With brand strength, RFH green laser is recommended by a peer of a ceramic knife supplier Using RFH 532nm green laser to laser mark on ceramic knife enables the pattern on it to be very clear and doesn’t affect its normal cutting performance. This maximizes the brand quality and the delicacy of the ceramic knife.   Today, RFH is going to share the case of a ceramic knife supplier whose peer recommends RFH 10W 532nm green laser to him.    As we all know, marking on a ceramic knife adopts a laser marking technique. The whole marking process on the ceramic knife is so simple and generally takes a few seconds to finish. But this seemingly “simple” process needs to be supported by a well-established technique.And that is a laser system with exceptional laser beam quality and its accessories. An excellent laser is the basis of 99% yield of laser marking product and the solid-state green laser produced by RFH with 13-year experience is the perfect example.   
    RFH green laser is recommended by a peer of a ceramic knife supplier
  • RFH 532nm green laser marking glass with ±0.02mm High precision
    RFH 532nm green laser marking glass with ±0.02mm High precision
    RFH 532nm green laser marking glass with ±0.02mm High precision 532nm green laser is a great accomplishment of RFH which has 13 years of R&D experience. It has perfect beam spot quality(Beam Circularity>90%) , relatively short pulse width <35ns@30K with little heat transfer to surrounding material and exceptional beam quality (M²<1.3) absolutely assured in all repetition rates. These features of 532nm green laser guarantee fast marking speed and delicate marking performance.  In addition, RFH 532nm green laser has independent R&D in power supply technique,which enables timely update and improvement of power supply control system module based on the laser’s need. The unique Q-switching technology makes it applicable to a variety of control requirements of laser applications. Online refreshment for harmonic coupling technology ensures its long life time. Therefore, RFH 532nm green laser is very ideal to be integrated into UV laser glass marking machine.
    RFH 532nm green laser marking glass with ±0.02mm High precision
  • Two more green lasers are ordered by a Singapore glassware laser marker
    Two more green lasers are ordered by a Singapore glassware laser marker
    Two more green lasers are ordered by a Singapore glassware laser marker 532nm green laser is a great accomplishment of RFH which has 13 years of R&D experience. It has perfect beam spot quality(Beam Circularity>90%) , relatively short pulse width <35ns@30K with little heat transfer to surrounding material and exceptional beam quality (M²<1.3) absolutely assured in all repetition rates. These features of 532nm green laser guarantee fast marking speed and delicate marking performance.  In addition, RFH 532nm green laser has independent R&D in power supply technique,which enables timely update and improvement of power supply control system module based on the laser’s need. The unique Q-switching technology makes it applicable to a variety of control requirements of laser applications. Online refreshment for harmonic coupling technology ensures its long life time. Therefore, RFH 532nm green laser is very ideal to be integrated into UV laser glass marking machine.
    Two more green lasers are ordered by a Singapore glassware laser marker
  • 532nm green laser engraving glass of car
    532nm green laser engraving glass of car
    532nm green laser engraving glass of car Using RFH 532nm green laser to mark LOGO on automobile windscreen can make sure the logo to be accurate, high-definition and long-lasting after long time driving.   High precision of ±0.002mm, high stability and high cost performance are the core advantages of RFH green laser.   RFH green laser features 532nm laser wavelength. It is this small laser wavelength that decides the excellent beam quality and small focal spot of the green laser. Therefore, it can perfectly meet the needs of ultra-precise marking of automobile windscreen with the minimum character being 0.02mm.  
    532nm green laser engraving glass of car
  • RFH 532nm green laser is used to mark Logo on windscreen of luxurious automobile
    RFH 532nm green laser is used to mark Logo on windscreen of luxurious automobile
    RFH 532nm green laser is used to mark Logo on windscreen of luxurious automobile Using RFH 532nm green laser to mark LOGO on automobile windscreen can make sure the logo to be accurate, high-definition and long-lasting after long time driving.   High precision of ±0.002mm, high stability and high cost performance are the core advantages of RFH green laser.   RFH green laser features 532nm laser wavelength. It is this small laser wavelength that decides the excellent beam quality and small focal spot of the green laser. Therefore, it can perfectly meet the needs of ultra-precise marking of automobile windscreen with the minimum character being 0.02mm.  
    RFH 532nm green laser is used to mark Logo on windscreen of luxurious automobile
  • RFH 35W green laser marking-glass logo, So Easy
    RFH 35W green laser marking-glass logo, So Easy
    RFH 35W green laser marking-glass logo, So Easy   South Korean customer Fach produces glass wine cups. Before, the factory also used a brand of green laser, but there were always some wine cups with little defects which were overheated during processing, causing the wine cups to scorch or even deform.   Introduced by a friend, Fach has learned that the RFH Expert III 532 green laser is very effective for marking glass. So he has ordered one from us and tested the effect. After using our laser, Fach said that the heat affected area of the laser during processing is very small, which is very suitable for their laser application, and there will be no scorching or deformation.    At the beginning of the month, I received a call from Fach again. Because of his expansion of the production line, he needed to order 5 green lasers again.  
    RFH 35W green laser marking-glass logo, So Easy
  • RFH 532nm green laser marking glass without deformation
    RFH 532nm green laser marking glass without deformation
    RFH 532nm green laser marking glass without deformation   South Korean customer Fach produces glass wine cups. Before, the factory also used a brand of green laser, but there were always some wine cups with little defects which were overheated during processing, causing the wine cups to scorch or even deform.   Introduced by a friend, Fach has learned that the RFH Expert III 532 green laser is very effective for marking glass. So he has ordered one from us and tested the effect. After using our laser, Fach said that the heat affected area of the laser during processing is very small, which is very suitable for their laser application, and there will be no scorching or deformation.    At the beginning of the month, I received a call from Fach again. Because of his expansion of the production line, he needed to order 5 green lasers again.  
    RFH 532nm green laser marking glass without deformation
  • 532nm green laser matching 20W green laser marking machine
    532nm green laser matching 20W green laser marking machine
    RFH 532nm green laser matching 20W green laser marking machine It only takes 0.2 seconds to mark the QR code of PCB circuit board with 532nm green laser  532nm green laser has superior beam quality   Have you formulated your laser processing production plan for the new year? Do you plan to purchase or update your laser processing equipment? Today, the editor of RFH Laser recommends a green laser—RFH Excellent Ⅱ 532nm green laser (18W-35 W) to new friends in the industry. In the new year, it will be stable and dominate the laser marking market, it can help.  
    532nm green laser matching 20W green laser marking machine
  • green laser takes 0.2 seconds to mark the QR code of PCB circuit board
    green laser takes 0.2 seconds to mark the QR code of PCB circuit board
    RFH 532nm green laser matching 20W green laser marking machine It only takes 0.2 seconds to mark the QR code of PCB circuit board with 532nm green laser  532nm green laser has superior beam quality   Have you formulated your laser processing production plan for the new year? Do you plan to purchase or update your laser processing equipment? Today, the editor of RFH Laser recommends a green laser—RFH Excellent Ⅱ 532nm green laser (18W-35 W) to new friends in the industry. In the new year, it will be stable and dominate the laser marking market, it can help.  
    green laser takes 0.2 seconds to mark the QR code of PCB circuit board
1 2 3 ... 9

A total of 9 pages

Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact