10W-15W uv laser

532nm green laser matching 20W green laser marking machine

RFH 532nm green laser matching 20W green laser marking machine

It only takes 0.2 seconds to mark the QR code of PCB circuit board with 532nm green laser

 532nm green laser has superior beam quality

 

Have you formulated your laser processing production plan for the new year? Do you plan to purchase or update your laser processing equipment? Today, the editor of RFH Laser recommends a green laser—RFH Excellent Ⅱ 532nm green laser (18W-35 W) to new friends in the industry. In the new year, it will be stable and dominate the laser marking market, it can help.

 

  • Laser Wavelength:

    532nm
  • Average Output Power :

    35W @50kHz
  • Pulse Width:

    <25ns @50kHz
  • Pulse Repetition Rate :

    10-200kHz
  • Spatial Mode:

    TEM00
  • Beam Quality (㎡) :

    <1.2
  • Beam Diameter:

    1.0±0.2mm Measured at window
  • Beam Full Divergence Angle :

    <1.2mrad
  • Beam Circularity:

    >90%
  • Pulse-To-Pulse Stability:

    <2% RMS/@30kHz
  • Average Power Stability :

    <3% RMS/8hr
  • Beam-Pointing Drift:

    <30μrad/℃
  • Polarization Ratio:

    >100:1
  • Polarization Orientation:

    Horizontal
  • Operating Temp. & RH:

    10℃ to 35℃ | <80%
  • Storage Temp. & RH:

    -20℃ to 65℃ | <90 %
  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase
  • Power Consumption:

    <5000W
  • Warranty :

    18months
  • Product Detail
  • Video

RFH 532nm green laser matching 20W green laser marking machine

It only takes 0.2 seconds to mark the QR code of PCB circuit board with 532nm green laser

 532nm green laser has superior beam quality

 

Have you formulated your laser processing production plan for the new year? Do you plan to purchase or update your laser processing equipment? Today, the editor of RFH Laser recommends a green laser—RFH Excellent Ⅱ 532nm green laser (18W-35 W) to new friends in the industry. In the new year, it will be stable and dominate the laser marking market, it can help.

 

Recommend this Excellent Ⅱ 532nm 18W-35 W green laser to new friends in the industry, not because it is a new product of RFH, but because it is a classic high-quality product of RFH. It constitutes a variety of 20W green laser marking machines at home and abroad, a variety of ceramic punching scribing machines with different powers, wafer marking machines, glass scribing machines for touch screens and LCD displays, solar thin film scribing machines, etc. Metal laser processing equipment has become the benchmark of this type of laser processing equipment with its superior performance, stability, speed and good performance.

 

Stability: Excellent Ⅱ 532nm green laser contains RFH's doctoral team independently researched and developed a laser dedicated power control system, which can update the power control system function modules in time, and improve the function modules according to laser requirements to ensure the stable operation of the entire laser system and power stability high. It also has an internal cavity self-purification system, which can help extend the life of the laser, help manufacturers reduce maintenance costs and save costs.

 

Fast: RFH Excellent Ⅱ 532nm green laser marking a regular size QR code on the PCB board only takes about 0.2 seconds, which is very fast.

 

Good: RFH Excellent Ⅱ 532nm green laser has superior beam quality (M2<1.2) and short pulse width <12ns@40k, which makes the marking effect very clear and delicate, and the heat affected area is small, which can help manufacturers improve the yield . Moreover, it also has a unique Q-switching control technology, which is suitable for various laser application control needs.

 

12 years of intensive brand cultivation and 12 years of excellence have made RFH a first-class enterprise capable of manufacturing first-class lasers and providing first-class laser technology and services.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
green laser takes 0.2 seconds to mark the QR code of PCB circuit board
green laser takes 0.2 seconds to mark the QR code of PCB circuit board
RFH 532nm green laser matching 20W green laser marking machine It only takes 0.2 seconds to mark the QR code of PCB circuit board with 532nm green laser  532nm green laser has superior beam quality   Have you formulated your laser processing production plan for the new year? Do you plan to purchase or update your laser processing equipment? Today, the editor of RFH Laser recommends a green laser—RFH Excellent Ⅱ 532nm green laser (18W-35 W) to new friends in the industry. In the new year, it will be stable and dominate the laser marking market, it can help.  
green laser takes 0.2 seconds to mark the QR code of PCB circuit board
532nm green laser has superior beam quality
532nm green laser has superior beam quality
RFH 532nm green laser matching 20W green laser marking machine It only takes 0.2 seconds to mark the QR code of PCB circuit board with 532nm green laser  532nm green laser has superior beam quality   Have you formulated your laser processing production plan for the new year? Do you plan to purchase or update your laser processing equipment? Today, the editor of RFH Laser recommends a green laser—RFH Excellent Ⅱ 532nm green laser (18W-35 W) to new friends in the industry. In the new year, it will be stable and dominate the laser marking market, it can help.  
532nm green laser has superior beam quality
 marking plastic socket
UV laser touchless marking plastic socket is perfect
RFH UV laser touchless marking plastic socket is perfect! On plastic switches and relays, different indicators or words are generally required to be marked. RFH UV laser can make these graphics and words clearly visible, and they will not be blurred even under the condition of daily consumption or environmental changes, and the using time is shortened. The features of Low-cost, high-efficiency, and high-quality ultraviolet lasers will further develop in the field of plastic switches and relays.  
 marking plastic socket
3W5W nanosecond ultraviolet laser
3W5W nanosecond ultraviolet laser gives the glass higher artistic value
3W5W nanosecond ultraviolet laser gives the glass higher artistic value Carrying out UV laser engraving on the water cup is an artistic pursuit as well as an enjoyment of life.   The UV marking process is realized by using the photochemical reaction between UV light and the material to cause the color to change. Using appropriate parameters can avoid the obvious removal effect on the surface of the material, and thus can mark graphics and characters without obvious touch.
3W5W nanosecond ultraviolet laser
excellently marks glass
35W green laser of the characteristic of small spot and high beam excellently marks glass kettle
35W green laser of the characteristic of small spot and high beam excellently marks glass kettle     RFH Green Laser has received widespread attention in the marking industry due to its short pulse, high beam quality, and high peak power. The green laser first has a small wavelength, which determines that it has a high-quality beam, a small spot, and can achieve the ultra-fine marking requirements of glass products, and small characters can even reach 0.02mm.
excellently marks glass
food packaging marking machine
RFH 355nm UV laser used in food packaging marking machine
RFH 355nm UV laser used in food packaging marking machine Marking the production date of food packaging, fast with UV laser 3W5W UV laser is used in food packaging marking machine with high power stability   I believe everyone will buy things in major supermarkets and convenience stores, buy all kinds of snacks and drinks, etc. Many people look at the production date when buying things, especially food, but many people don’t know that the production date on the packaging can be forged and changed. Some merchants changed the old date to a new date in order to put the unsold food on the market again. In order to make money, some businesses make counterfeit and shoddy products, brand others' trademarks, and sell their own products. This not only deceives consumers, but also infringes other people's trademark rights. I won't say how serious it is, but there is a way to prevent these illegal businesses. That is to mark the package of each product with a date and product information with a laser marking machine.
food packaging marking machine
UV laser for mask marking machine
Why choose RFH UV laser for mask marking machine
RFH's 355nm ultraviolet laser is used in anti-counterfeiting masks Why choose RFH UV laser for mask marking machine RFH 355nm UV laser marking mask LOGO production date   Mask marking machine needs to choose UV laser to realize marking and printing. Why is UV laser marking? It should be known that the material of this kind of melt blown cloth has a thin surface and is not easy to process in a hot environment. Other laser light sources will produce high temperatures during processing. Only UV laser marking can be adapted, so that 355mm UV cold is used for it. The light source does not produce high temperature during marking and will not cause damage to the mask. This type of light source has a small focus spot and is very suitable for marking delicate and small materials. This marking effect is not only clear and bright, but also There will be no stray ink and burrs, and it can be said that it is even better in marking.
UV laser for mask marking machine
marking  PCB circuit board
Don't worry about PCB circuit board burrs with RFH 15W UV laser
Don’t worry about PCB circuit board burrs with RFH 15W UV laser   In the production process of PCB circuit boards, ultraviolet laser technology needs to be used for cutting, perforating, engraving, and sub-boarding to reduce the generation of burrs. The main hazard of PCB circuit board burrs reduces the quality of the product, so it makes the product unsightly, and also weakens the strength of information transmission, shortens the transmission distance, easily causes signal interference, reduces the mechanical strength and easily falls off. Therefore, when companies produce PCB circuit boards, they will find ways to minimize the appearance of burrs.
marking  PCB circuit board
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

leave a message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact