355nm UV laser cutting PCB with no burrs and no glue overflow FPC requires a laser cutting machine to depanel and then install on different electronics. As all know, UV laser plays an important role in FPC laser cutting machine. It is a cold light source with small heat-affecting zone of 10μm, making it applicable to perform cutting, depaneling, drilling on FPC and rigid-flex PCB with perfect cutting performance.   With fast speed, high precision of ±0.02mm and high stability, RFH 355 series UV laser has become a well-known brand among FPC and PCB cutting, drilling, depanling and engraving clients.   

The cutting of PCB circuit board, should elect RFH 15W ultraviolet laser Cutting PCB circuit boards, using high power UV laser is very suitable RFH 15W UV laser cutting PCB circuit board at high speed without burrs   Why do PCB circuit boards need to be cut with UV lasers？ There are many ways to cut PCB circuit boards, and laser cutting is a very important one. The high-power ultraviolet laser is very suitable for high-precision cutting. The edges after laser cutting are very neat and without burrs  

High-power 15w UV laser cutting PCB without burrs, high-definition QR code printing   PCB is used in electronic devices such as mobile phones. It is an exquisite material. Cutting and marking on it needs to be able to achieve an accuracy requirement of less than 0.1mm and cannot cause deformation of the PCB. The same is true for the two-dimensional code marking on its surface.

35W green laser Cold source cutting PCB circuit board at high speed, smooth and not deformed   PCB circuit boards are currently used in many electronic devices, whether it is the earliest red and white phones or today's Switches, smart phones, cameras, etc., they all play an important role in the architecture of the electronic circuits. The mass production of circuit boards requires full-page cutting of more entire circuit boards. In order not to damage the material, fine but high-speed cutting is required.

15W20W high power UV laser cutting PCB sub-board, or FPC scribing   With the increasing maturity of laser technology, laser pages are often used in some more delicate products and operations, such as PCB cutting and FBC scribing operations. Circuit boards are generally precision electronic components, and their processing operations need to be careful. A deviation can easily cause product loss and increase the cost of manufacturers.

RFH 20w high power UV laser cutting PCB circuit board, smooth without carbonization   PCB circuit boards are mainly used in various electronic products. As an important programming hardware in electronic products, they are widely used in tablets, mobile phones or game consoles. At present, most manufacturers use lasers to cut PCB circuit boards.

35w high power green laser cutting PCB circuit board, the incision is smooth without burrs 35w high power green laser for engraving and cutting pcb   RFHExpert III 532 35w Green Laser Yes! PCB is a necessary part of electronic equipment. Most electronic control hardware is attached to PCB for installation. However, in the current situation of shrinking electronic product hardware, how to cut PCB board has become a big problem. Green laser is currently the most cutting-edge technology for PCB cutting, and it is the technology that most large PCB manufacturers will choose. So many high-power green lasers are most suitable for PCB cutting?

High power nanosecond UV laser and green laser cutting PCB board Cutting PCB circuit boards, is it better to use a UV laser or a green laser?   PCB panels are often used to carry hardware with electronic chips. Under the current situation that the price of electronic chips continues to rise, how to make PCB panels into more practical and precious electronic chips has become a very important issue.

The RFH 15W high -power ultraviolet laser is a PCB cutting machine developed and adjusted by RFH. It has been used for a long time in the field of PCB cutting and helps UV laser continuously enter the field of PCB cutting.

The RFH green laser relies on a non-contact method to radiate small light spots to scratch and cut on the surface of the PCB board.

The high power UV laser is 355 nm wavelength, with a "cold marking" method, the laser beam diameter is only 20 μm after focusing, the UV laser's pulse energy comes in contact with the material in the microsecond. There is no significant thermal influence next to the slit, so no heat damages the electronic component.  

High power industrial uv laser cut pcb board Expert III 355 series UV DPSS laser, developed and produced by RFH, covers 10w-15w in laser power with short pulse width (<20ns@40K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). It is widely used in PE/PCB/FPC cutting, glass & sapphire cutting, drilling, scribing & cutting used in high precision micromaching areas.