Best Green Laser Products,suppliers,manufacturers.

Categories

Applications

Videos

new products

Latest Blog

RFH 355nm UV laser precision cutting of gold foil paper
Read More/Dec 14 , 2023
RFH UV laser marking leather is different!
Read More/Dec 14 , 2023
How to choose a high-quality UV laser supplier?
Read More/Dec 12 , 2023
How to use a 10W UV laser engraving on acrylic glass
Read More/Dec 12 , 2023

green lasers for 3D subsurface engraving
To make all this work, we need a “green” laser. Like a fiber laser, these are solid state, pulsed lasers but green lasers work at a wavelength of 532nm (nanometers) as compared to a fiber laser with a wavelength of 1062nm (about twice as long as a green laser) or a CO2 with a wavelength of 9.4-10.6µm (micrometers), or 10,600nm, which is substantially longer yet. This illustrates the uniqueness of a green laser compared to the lasers most of us have.

Learn More
green lasers for 3D subsurface engraving
green-laser-engraving Some photos as a memory carrier are usually engraved inside the crystal and glass cube. The 3d crystal laser engraving machine, although for the 2d image, it can transform it into a 3d model to provide instruction for the laser beam.

Learn More
RFH 532nm high power green laser source drilling glass
The high power green laser source is a drilling device that uses an extremely small spot. The high-quality beam and small spot size enable it to meet the ultra-fine marking requirements of glass products. The high repetition frequency nanosecond green laser of RFH Laser Co., Ltd. , can perform various types of fast finishing on thin glass and tubular glass of various materials. Nanosecond green light glass drilling equipment has been used in the processing of soda lime glass, borosilicate glass, quartz glass and other glass deep processing fields. success case,

Learn More
RFH 532nm green laser cutting mobile phone tempered glass film
RFH green laser is at the forefront of the industry in tempered film cutting, and has formed its own mature technology system. Through the non-contact cutting method, the emitted light spot only needs to move on the surface of the tempered film, and the low-temperature cold light source can be used for cutting. It only takes a few seconds to cut a tempered film, which greatly improves the production efficiency. , completely in line with Mr. Liu's demands. After visiting RFH's production line for cutting mobile phone tempered film, Mr. Liu quickly ordered a batch of green lasers and put them into production quickly, meeting the company's large-scale orders for tempered film.

Learn More
RFH green laser for 3D internal engraved crystal
Mr. Liu from Zhejiang recently purchased and ordered an RFH green laser, which was installed on the machine for precise internal carving of crystals.

Learn More
RFH 35watt high power green laser cutting glass with smooth edges
RFH 35watt high power green laser cutting glass with smooth edges Expert III 532 series green DPSS laser, developed and produced by RFH, covers 35w in laser power with short pulse width (<25ns@50K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%).It is perfect for glass marking,thin film etching and surface treatment for most of the metals and non-metal materials, such as removing the oxide layer from the metal surface

Learn More
RFH 532nm green laser cuts glass with smooth edges and no cracking
The cutting of RFH green laser adopts non-contact cutting, and the cutting is completed by moving the high-energy light spot on the glass surface. It is worth mentioning that although the energy of the RFH green laser beam is extremely high, since the thermal effect is zero, it will not cause damage to other parts, allowing the glass cutting process to reach a balance.

Learn More
RFH 5W green laser engraving glass without causing deformation
Through the introduction of a friend, I learned that the RFH S9-532 green laser is very effective in marking glass, so I ordered one from us to go back and try the effect. After using our laser, Mr. Chen said that they The workers in the factory have a small heat-affected zone during processing, which is very suitable for their laser application needs, and there will be no burning or deformation.

Learn More
RFH 5w green laser engraving glass bottle
The RFH green laser emits ultra-high-energy laser beams to scratch the glass surface. During the process, the glass surface will not be broken due to the sudden impact of the laser beam. The reason is that the thermal effect of the UV laser radiation engraving is basically zero.

Learn More
5w 10w green laser for 3d glass etching
5w 10w green laser for 3d glass etching S9 series green DPSS laser, developed and produced by RFH, covers 5w/10w in laser power with short pulse width (<14ns@30K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). It is particularly suitable for drilling and scribing in ceramics, marking, cutting and drilling in glass & wafer and surface treatment in most of the metal and non-metal materials.

Learn More
3d crystal laser subsurface engraving machine-532nm green laser
3d crystal laser subsurface engraving machine-532nm green laser Excellent III 532 series green DPSS laser, developed and produced by RFH, covers 18w-35w in laser power with short pulse width (<7-8ns@40K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). It is particularly suitable for drilling and scribing in ceramics, marking, cutting and drilling in glass & wafer and surface treatment in most of the metal and non-metal materials.

Learn More
PCB cutting board, engraving, all need to use green laser technology
At present, RFH green lasers have entered many domestic electronics factories for PCB panel cutting and production, and have a very important market position in East Asia, Western Europe and many regions and countries in Africa.

Learn More

1 ... 13 14 15 16 17 ... 21

A total of 21 pages