10W-15W uv laser
  • RFH UV laser marking Iphone12 earphone and charger
    RFH UV laser marking Iphone12 earphone and charger
    RFH UV laser marking Iphone12 earphone and charger   As a leading solid-state laser manufacturer with 13-year experience, RFH nanosecond solid-state UV laser is applicable to mark on plastic charger with outstanding marking effect.    For plastic charger marking, it is suggested to use RFH S9 series UV laser with excellent marking performance.   A Shenzhen UV laser marking manufacturer saw most of his peers use RFH UV laser. The marking effect of RFH UV laser is excellent. Comparing with oil, RFH UV laser has lower energy consumption, longer life time and is easier to use and widely used on different materials such as various tubes, plastic film, plastic bottle cap and other materials like PPR, PVC and PE. Seeing so many outstanding features of RFH UV laser, he paid a visit to RFH with a sample and ask for proofing.  
    RFH UV laser marking Iphone12 earphone and charger
  • UV laser featuring cold processing is used to cut and depanel PCB/FPC
    UV laser featuring cold processing is used to cut and depanel PCB/FPC
    UV laser featuring cold processing is used to cut and depanel PCB/FPC RFH UV laser with 13-year experience can cut PCB/FPC without burr, which reduces scrap rate and cost and improves quality.   In the past few months, more and more clients ask for RFH laser to cut and depanel PCB/FPC.   For the time being, FPC laser cutting technique often adopts 355nm UV laser and the laser power ranges from 8W to 10W. The main reason why other circuit board cutting also uses 355nm UV laser is that it has exceptional laser beam quality and it is a kind of “cold light source” with little heat transfer to surrounding material. A FPC laser cutting using RFH Expert series solid-state UV laser has only 10μm heat-affecting zone. This is very helpful in improving productivity.   
    UV laser featuring cold processing is used to cut and depanel PCB/FPC
  • RFH UV laser with 13-year experience can cut circuit board without burr
    RFH UV laser with 13-year experience can cut circuit board without burr
    RFH UV laser with 13-year experience can cut circuit board without burr RFH UV laser with 13-year experience can cut PCB/FPC without burr, which reduces scrap rate and cost and improves quality.   In the past few months, more and more clients ask for RFH laser to cut and depanel PCB/FPC.   For the time being, FPC laser cutting technique often adopts 355nm UV laser and the laser power ranges from 8W to 10W. The main reason why other circuit board cutting also uses 355nm UV laser is that it has exceptional laser beam quality and it is a kind of “cold light source” with little heat transfer to surrounding material. A FPC laser cutting using RFH Expert series solid-state UV laser has only 10μm heat-affecting zone. This is very helpful in improving productivity.   
    RFH UV laser with 13-year experience can cut circuit board without burr
  • 355nm UV laser with compact design can help speed up SLA process
    355nm UV laser with compact design can help speed up SLA process
    355nm UV laser with compact design can help speed up SLA process     With UV laser developed and produced by RFH, the process model made by SLA Photopolymer is vivid in details and has smooth cutting edges, increasing the value and artistic quality to a new level.   The past two months witnessed an increasing inquiries about SLA laser and 3D printer UV photosensitive adhesive from many clients, including oversea ones. Sam is a Colombian laser integrator and left a message asking for S9 series UV laser to do the rapid prototyping of SLA Photopolymer.   
    355nm UV laser with compact design can help speed up SLA process
  • UV laser marking 3D SLA Photopolymer
    UV laser marking 3D SLA Photopolymer to realize rapid prototyping
    RFH UV laser marking 3D SLA Photopolymer to realize rapid prototyping     With UV laser developed and produced by RFH, the process model made by SLA Photopolymer is vivid in details and has smooth cutting edges, increasing the value and artistic quality to a new level.   The past two months witnessed an increasing inquiries about SLA laser and 3D printer UV photosensitive adhesive from many clients, including oversea ones. Sam is a Colombian laser integrator and left a message asking for S9 series UV laser to do the rapid prototyping of SLA Photopolymer.   
    UV laser marking 3D SLA Photopolymer
  • RFH UV laser make sure FPC to have smooth cutting edges
    RFH UV laser make sure FPC to have smooth cutting edges
    RFH UV laser make sure FPC to have smooth cutting edges Using  RFH 355 series UV laser to cut, drill and scribe on FPC can guarantee smooth cutting edges and ensure the drilling to be done in accurate spot, which increases the roundness of the hole and reduces the material waste & cutting failures.   This week, RFH delivered a shipment of 15W high poer UV lasers Expert III 355 which are intended to do the cutting, drilling and depaneling of PCB/FPC.    With 13-year experience together with the knowledge of a top professional team, 15W high power UV laser Expert III 355 developed and produced by RFH features little heat transfer to surrounding material, high precision of ±0.002mm and high stability. It is popular for cutting ,drilling and engraving on PCB and FPC, for it can help prevent the generation of burr and make sure the cutting edges to be smooth and clean.   
    RFH UV laser make sure FPC to have smooth cutting edges
  • 15W uv laser cutting FPC Circuit board
    15W uv laser cutting FPC Circuit board
    15W uv laser cutting FPC Circuit board Using  RFH 355 series UV laser to cut, drill and scribe on FPC can guarantee smooth cutting edges and ensure the drilling to be done in accurate spot, which increases the roundness of the hole and reduces the material waste & cutting failures.   This week, RFH delivered a shipment of 15W high poer UV lasers Expert III 355 which are intended to do the cutting, drilling and depaneling of PCB/FPC.    With 13-year experience together with the knowledge of a top professional team, 15W high power UV laser Expert III 355 developed and produced by RFH features little heat transfer to surrounding material, high precision of ±0.002mm and high stability. It is popular for cutting ,drilling and engraving on PCB and FPC, for it can help prevent the generation of burr and make sure the cutting edges to be smooth and clean.   
    15W uv laser cutting FPC Circuit board
  • UV 3d laser machine
    UV 3d laser machine with repetition rate up to 200kHz
    UV 3d laser machine with repetition rate up to 200kHz   Early this month, Jason, who is the boss of 3D model producer, asked about what kind of laser is suitable for Photopolymer SLA process and we recommended S9 series UV laser.  RFH 355 series UV laser features high efficiency, stable laser output and compact design, making it the suitable laser for Photopolymer SLA process. This UV laser has a laser wavelength at 354.7nm with repetition rate up to 200kHz. Its laser power ranges from 3w to 10w absolutely assured in all repetition rates. Besides, it is characterized by exceptional beam quality (M²<1.2) ,relatively short pulse width <12ns@30k with little heat transfer to surrounding material during the marking process.   In addition, this UV laser is designed with unique Q-switching technology and supports communication with computer. RS232 control interface ensures easy control of the laser from the outside, which reduces the labor cost to a large extent. Such an easy-to-use, easy-to-install and compact laser can meet the different needs of Photopolymer SLA process.  
    UV 3d laser machine
1 ... 43 44 45 46 47 48 49

A total of 49 pages

Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

leave a message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact