10W-15W uv laser

RFH UV laser easily completes 0.004mm ultra-small diameter humidifier punching

RFH UV laser easily completes 0.004mm ultra-small diameter humidifier punching

 

No matter how exquisite handicrafts can be processed by traditional handicrafts, there are some limits that can never be touched, such as extremely small holes, how small? The diameter is 0.004mm, which is completely invisible to the naked eye under normal circumstances.

  • Laser Wavelength:

    354.7nm
  • Average Output Power :

    3W-10W @30kHz
  • Pulse Width:

    <12ns @ 30kHz
  • Pulse Repetition Rate :

    10-200kHz
  • Beam Quality (㎡) :

    <1.2
  • Beam Diameter :

    0.8±0.2mm Measured at window
  • Beam Full Divergence Angle :

    <2mrad
  • Beam Circularity :

    >90%
  • Pulse-to-Pulse Stability :

    <2% RMS/@30kHz
  • Average Power Stability :

    <5% RMS/8hr
  • Beam-Pointing Drift :

    <30μrad/℃
  • Polarization Ratio :

    >100:1
  • Polarization Orientation :

    Horizontal
  • Operating Temp. & RH :

    10℃ to 30℃ | <80%
  • Storage Temp. & RH) :

    -20℃ to 65℃ | <90 %
  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase
  • Power Consumption :

    <500W
  • Warranty :

    18months
  • Product Detail
  • Video

uv laser

 

RFH UV laser easily completes 0.004mm ultra-small diameter humidifier punching

 

Website: http://www.rfhtech.com

Whatsapp(Wechat): 18928466502

Email: export06@rfhlasertech.com

 

No matter how exquisite handicrafts can be processed by traditional handicrafts, there are some limits that can never be touched, such as extremely small holes, how small? The diameter is 0.004mm, which is completely invisible to the naked eye under normal circumstances.

Why make such tiny holes? In practical applications, the product closest to life is the "humidifier".

The humidifier uses ultrasonic waves to disperse the water droplets, and the dispersed water droplets will pass through a structure called "atomizing sheet". Because the diameter of the water droplets is very small, it will become almost vaporized and can to humidify the air.

For example, the processing of atomizing tablets cannot be punched by conventional mechanical methods at all. It is not a hard material limitation. The main reason is that the diameter of the punching hole is too small, and there is no way to complete it with small processing tools. laser to complete.

In order for the humidifier to be fully atomized, the hole must be made very small. The RFH laser easily completes the ultra-small diameter of 0.004mm, so that the water can be fully vaporized when passing through the atomizing sheet.

 

Why can lasers make such tiny holes?

 

Laser processing is a non-contact processing method without the limitation of processing materials. The essence of laser is light. In theory, the light can be controlled to a thickness that cannot be recognized by the human eye, but the energy will not be attenuated. For the processing of such delicate products, the laser is definitely the first choice, maybe even the only choice.

 

The equipment that achieves such fine drilling is the RFH S9 series pulsed ultraviolet solid-state laser.

 

RFH S9 series

 

Unlike the bulky solid-state lasers in the past, the RFH S9 series pulsed ultraviolet solid-state lasers can control the volume to a very small extent. Because of its small size, the additional advantage is that it has a high degree of integration, does not need to go through complicated installation processes, and does not need to make a large optical path. It has the characteristics of out-of-the-box use.

 

High-power UV laser with ultra-high precision and excellent beam quality, making it easy to process micro-holes

 

Although the RFH S9 series pulsed UV solid-state lasers are small in size, due to their excellent cavity design, the beam quality is very high (M²<1.2) and has excellent beam quality in all frequency ranges.

Of course, for machining precision instruments, in addition to excellent beam quality, precision is equally important. RFH S9 series pulsed ultraviolet solid-state lasers have ultra-high precision of ±0.02mm.

When machining precision instruments, due to the ultra-high precision and excellent beam quality, it is easy to process.

Not only that, the traditional method of mechanical adjustment of parameters has been difficult to meet the small changes, and through the fully digital display method, the adjustment parameters have become extremely accurate.

By communicating with the computer, the working state of the laser can also be monitored remotely, and the laser can be controlled externally through RS232.

 

The most important reason why RFH UV lasers are different is their strong technical strength

 

The most important reason why RFH can be different is that it has strong technical strength and has core technology.

For a laser, the most important component is the power supply. The quality of a power supply directly affects the stability and beam quality of the laser. RFH has the technical advantage of independently developing a power supply, and the results are self-evident.

In the face of the future era of intelligent manufacturing, the strong technical accumulation of RFH laser has already been prepared, and the strong technical capability is the most stable backing, which is sufficient to meet any challenges.

 

This is the result of 15 years of leading technology and industry experience of the RFH brand.

 

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
UV laser
UV laser can cut screen protector tempered glass film with smooth and even cutting edges
RFH 355nm UV laser can cut screen protector tempered glass film with smooth and even cutting edges   With touch screen being increasingly used, the demand of mobile phone tempered glass film is also increasing. However, the sizes of different mobile phone brands are different, so the tempered glass film needs to be cut and drilled to required size. In the past, people used traditional CNC cutting technique on tempered glass film, but this method can easily lead to micro cracks or broken edges. So how to prevent tempered glass film from damaging during the cutting process? Well, RFH UV laser can help. The tempered glass film using RFH 355 series UV laser to drill and cut on won’t damage because of heat or crack because of instability. Instead, its cutting edges are quite smooth and the drilled holes are very round, making it more suitable to be used in smart phones.
UV laser
RFH UV laser for cutting and drilling screen protector tempered glass film for for iPhone
RFH UV laser for cutting and drilling screen protector tempered glass film for for iPhone
RFH UV laser for cutting and drilling screen protector tempered glass film for for iPhone With touch screen being increasingly used, the demand of mobile phone tempered glass film is also increasing. However, the sizes of different mobile phone brands are different, so the tempered glass film needs to be cut and drilled to required size. In the past, people used traditional CNC cutting technique on tempered glass film, but this method can easily lead to micro cracks or broken edges. So how to prevent tempered glass film from damaging during the cutting process? Well, RFH UV laser can help. The tempered glass film using RFH 355 series UV laser to drill and cut on won’t damage because of heat or crack because of instability. Instead, its cutting edges are quite smooth and the drilled holes are very round, making it more suitable to be used in smart phones.   
RFH UV laser for cutting and drilling screen protector tempered glass film for for iPhone
 3W5W UV laser
3W5W UV laser creates endurable marking on plastic tube
RFH 3W5W UV laser creates endurable marking on plastic tube To make the patterns and words on the plastic tube more durable, many tube manufacturers choose to use UV laser to mark on the plastic tube. Recently, Mr. Chen, who is a tube producer, ordered two units of UV laser marking machine and selected RFH 355 series UV laser as the laser generator.   RFH UV lasers feature with ultra-compact, high stability, high efficiency, high reliability and excellent laser beam quality.   The UV laser produced by RFH can solve the problem of marking on glossy tube. Using this UV laser can mark durable patterns and words on the surface of the plastic tube thoroughly against oxidation. This greatly help extend the service lifetime of the plastic tube.   
 3W5W UV laser
355nm UV laser
355nm UV laser is used to do antioxidant marking on plastic tube
355nm UV laser is used to do antioxidant marking on plastic tube To make the patterns and words on the plastic tube more durable, many tube manufacturers choose to use UV laser to mark on the plastic tube. Recently, Mr. Chen, who is a tube producer, ordered two units of UV laser marking machine and selected RFH 355 series UV laser as the laser generator.   RFH UV lasers feature with ultra-compact, high stability, high efficiency, high reliability and excellent laser beam quality.   The  UV laser produced by RFH can solve the problem of marking on glossy tube. Using this UV laser can mark durable patterns and words on the surface of the plastic tube thoroughly against oxidation. This greatly help extend the service lifetime of the plastic tube.   
355nm UV laser
Using RFH UV laser to mark on plastic package with incredible speed
Using UV laser to mark on plastic package with incredible speed
Using RFH UV laser to mark on plastic package with incredible speed Production date is the key information on food plastic package and needs to be clear and recognizable for consumers. To prevent the retailers from reselling the expired food to the consumers by replacing the old production date with the new one, more and more food producers choose to use UV laser marking machine to mark production date on the food package.   Last week, a food producer from Shantou ordered 2 units of UV laser marking machines which are equipped with RFH UV laser. After using RFH UV laser to mark on food plastic package, the marking speed becomes incredibly fast, for it takes less than a second to finish the marking process. This makes RFH UV laser very ideal for flying laser marking and assembly ling marking with faster marking speed and high quality.   
Using RFH UV laser to mark on plastic package with incredible speed
RFH 355 UV laser can create clear and lasting marking on plastic package
RFH 355 UV laser can create clear and lasting marking on plastic package
RFH 355 UV laser can create clear and lasting marking on plastic package Production date is the key information on food plastic package and needs to be clear and recognizable for consumers. To prevent the retailers from reselling the expired food to the consumers by replacing the old production date with the new one, more and more food producers choose to use UV laser marking machine to mark production date on the food package.   Last week, a food producer from Shantou ordered 2 units of UV laser marking machines which are equipped with RFH UV laser. After using RFH UV laser to mark on food plastic package, the marking speed becomes incredibly fast, for it takes less than a second to finish the marking process. This makes RFH UV laser very ideal for flying laser marking and assembly ling marking with faster marking speed and high quality.   
RFH 355 UV laser can create clear and lasting marking on plastic package
355nm UV laser cutting PCB with no burrs and no glue overflow
355nm UV laser cutting PCB with no burrs and no glue overflow
355nm UV laser cutting PCB with no burrs and no glue overflow FPC requires a laser cutting machine to depanel and then install on different electronics. As all know, UV laser plays an important role in FPC laser cutting machine. It is a cold light source with small heat-affecting zone of 10μm, making it applicable to perform cutting, depaneling, drilling on FPC and rigid-flex PCB with perfect cutting performance.   With fast speed, high precision of ±0.02mm and high stability, RFH 355 series UV laser has become a well-known brand among FPC and PCB cutting, drilling, depanling and engraving clients.   
355nm UV laser cutting PCB with no burrs and no glue overflow
RFH UV laser is applicable to cut, drill an depanel on FPC
RFH UV laser is applicable to cut, drill an depanel on FPC
RFH UV laser is applicable to cut, drill an depanel on FPC FPC requires a laser cutting machine to depanel and then install on different electronics. As all know, UV laser plays an important role in FPC laser cutting machine. It is a cold light source with small heat-affecting zone of 10μm, making it applicable to perform cutting, depaneling, drilling on FPC and rigid-flex PCB with perfect cutting performance.   With fast speed, high precision of ±0.02mm and high stability, RFH 355 series UV laser has become a well-known brand among FPC and PCB cutting, drilling, depanling and engraving clients.   
RFH UV laser is applicable to cut, drill an depanel on FPC
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact