10W-15W uv laser

532nm green dpss laser stripping metal bottle surface

532nm green dpss laser stripping metal bottle surface 

  • Laser Wavelength:

    532nm
  • Average Output Power :

    35W @50kHz
  • Pulse Width:

    <25ns @50kHz
  • Pulse Repetition Rate :

    10-200kHz
  • Spatial Mode:

    TEM00
  • Beam Quality (㎡) :

    <1.2
  • Beam Diameter:

    1.0±0.2mm Measured at window
  • Beam Full Divergence Angle :

    <1.2mrad
  • Beam Circularity:

    >90%
  • Pulse-To-Pulse Stability:

    <2% RMS/@30kHz
  • Average Power Stability :

    <3% RMS/8hr
  • Beam-Pointing Drift:

    <30μrad/℃
  • Polarization Ratio:

    >100:1
  • Polarization Orientation:

    Horizontal
  • Operating Temp. & RH:

    10℃ to 35℃ | <80%
  • Storage Temp. & RH:

    -20℃ to 65℃ | <90 %
  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase
  • Power Consumption:

    <800W
  • Warranty :

    18months
  • Product Detail
  • Video

532nm green dpss laser stripping metal bottle surface 

green laser

 

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
Expert III 532 Green laser 35W
Expert III 532 Green laser 35W
Expert III 532 series green DPSS laser, developed and produced by RFH, covers 35w in laser power with short pulse width (<25ns@50K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%).It is perfect for glass marking,thin film etching and surface treatment for most of the metals and non-metal materials, such as removing the oxide layer from the metal surface
Expert III 532 Green laser 35W
Green laser engraving ceramic jade LOGO lettering
Green laser engraving ceramic jade LOGO lettering
Green laser engraving ceramic jade LOGO lettering
Green laser engraving ceramic jade LOGO lettering
35W Green Nanosecond Lasers
Oxide iron deep marking engraving by 35W Green Nanosecond Lasers
Oxide iron deep marking engraving by 35W Green Nanosecond Lasers
35W Green Nanosecond Lasers
 marking plastic socket
UV laser touchless marking plastic socket is perfect
RFH UV laser touchless marking plastic socket is perfect! On plastic switches and relays, different indicators or words are generally required to be marked. RFH UV laser can make these graphics and words clearly visible, and they will not be blurred even under the condition of daily consumption or environmental changes, and the using time is shortened. The features of Low-cost, high-efficiency, and high-quality ultraviolet lasers will further develop in the field of plastic switches and relays.  
 marking plastic socket
Nanosecond solid ultraviolet lasers mark black
Nanosecond solid ultraviolet lasers mark black on PC clear plastics
Nanosecond solid ultraviolet lasers mark black on PC clear plastics   It turned out that the effect of hacking in PC transparent plastic was achieved with RFH ultraviolet laser   PC is a polycarbonate plastic. It is a safe and non -toxic plastic material, but it is very prone to fake and shoddy plastic materials. Therefore, in many manufacturers, how to find the method of not affecting the performance and the authenticity of authenticity is very. important.   RFH nanosecond solid ultraviolet laser adopts a new integrated design. Strict double -layer sealing protection can operate in high temperature and high humidity environments, ensuring the life of laser in different environments.
Nanosecond solid ultraviolet lasers mark black
355nm ultraviolet laser
355nm ultraviolet laser is used for marking LOGO lettering on ceramics
RFH 355nm ultraviolet laser is used for marking LOGO lettering on ceramics Solid UV laser has high stability, long life and durability   Marking LOGO or lettering on ceramics is so easy for RFH 355nm ultraviolet laser   When identifying the age of porcelain, in addition to the sense of weight, dryness, wetness, moistness, softness and hardness, coolness, rawness, slippery, roughness, and the bottom of the porcelain to identify the vintage. The signature of ancient porcelain is hand-painted and fired, but the problem of easy fall off cannot be avoided. Since the popularization of UV laser marking technology, marking LOGO or engraving on ceramics has become so easy. Ultraviolet laser is a cold light source, has the characteristics of low thermal impact, high precision, and high power stability. It provides an efficient solution for ceramic processing.  
355nm ultraviolet laser
UV pulsed solid-state laser engraving acrylic
355nm short wavelength high-power UV pulsed solid-state laser engraving acrylic crystal lamp
355nm short wavelength high-power UV pulsed solid-state laser engraving acrylic crystal lamp   Everyone should be familiar with laser engraving. In modern industrial products, laser engraving can be seen everywhere. Permanent marks are marked on the surface of items through laser beams. Whether it is for personalization or other needs, laser engraving is the most convenient one. Processing methods.
UV pulsed solid-state laser engraving acrylic
 marking ceramics
RFH 355nm UV laser marking ceramics, giving it a unique taste
RFH 355nm UV laser marking ceramics, giving it a unique taste   Ceramics are unique to the Chinese. The ceramic craftsmanship inherited for thousands of years has created too many possibilities, and ceramic technology is also being explored in the continuous progress of the Chinese.
 marking ceramics
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

leave a message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact