10W-15W uv laser

Italian customer purchased RFH green laser to cut PCB sub-board FPC scribing

Italian customer purchased RFH green laser to cut PCB sub-board FPC scribing

PCB and FPC are important electronic panels that need to be used in electronic equipment. They are responsible for multiple functions such as host data bearing in electronic equipment. They appear in mobile phones, tablets, game consoles, and cameras. For smaller PCB and FPC panels, cutting becomes a problem.

  • Laser Wavelength:

    532nm
  • Average Output Power :

    35W @50kHz
  • Pulse Width:

    <25ns @50kHz
  • Pulse Repetition Rate :

    10-200kHz
  • Spatial Mode:

    TEM00
  • Beam Quality (㎡) :

    <1.2
  • Beam Diameter:

    1.0±0.2mm Measured at window
  • Beam Full Divergence Angle :

    <1.2mrad
  • Beam Circularity:

    >90%
  • Pulse-To-Pulse Stability:

    <2% RMS/@30kHz
  • Average Power Stability :

    <3% RMS/8hr
  • Beam-Pointing Drift:

    <30μrad/℃
  • Polarization Ratio:

    >100:1
  • Polarization Orientation:

    Horizontal
  • Operating Temp. & RH:

    10℃ to 35℃ | <80%
  • Storage Temp. & RH:

    -20℃ to 65℃ | <90 %
  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase
  • Power Consumption:

    <5000W
  • Warranty :

    18months
  • Product Detail
  • Video

uv laser

Italian customer purchased RFH green laser to cut PCB sub-board FPC scribing

 

Website: http://www.rfhtech.com

Whatsapp(Wechat): 18928466502

Email: export06@rfhlasertech.com

 

PCB and FPC are important electronic panels that need to be used in electronic equipment. They are responsible for multiple functions such as host data bearing in electronic equipment. They appear in mobile phones, tablets, game consoles, and cameras. For smaller PCB and FPC panels, cutting becomes a problem.

 

RFH has not been in vain for more than ten years of research and development, and the customer is very close to the 35W green laser

 

The RFH green laser is a good machine that uses the low-temperature light spot of the cold light source for cutting. The application of laser technology has continued to develop in the pure blue. RFH has been developing lasers for more than ten years. From the beginning of the laser market where no one was involved Now that it has become a first-line product in the laser industry, the efforts of RFH cannot be described in words, but as long as you see the products of RFH, you can understand that the research and development over the past ten years has not been in vain.

 

RFH breaks through the barriers of laser technology and solves the problems of PCB sub-board cutting and FPC scribing

 

The spot of the RFH green laser is extremely small, and it can quickly move on the surface of the PCB and FPC panels. During the movement, the panel is cut at the right low temperature. Because the low temperature is used, the thermal effect is basically zero, so it will not cause scorching or deformation damage to the PCB and FPC panels, and can save materials to the greatest extent and avoid material losses.

 

RFH Nanosecond Green Laser

 

In addition, the green laser will not produce pollution during the cutting process, and there is no material to be replaced. It can be used only by plugging in, which greatly saves the cost of garbage disposal and consumables.

The R&D and breakthrough of PCB and FPC panels heralds the future of electronic technology, while the continuous R&D of RFH green lasers heralds the future of laser technology. RFH will unswervingly insist on breaking through laser technology barriers and opening up for more customers and market needs. The way forward.

 

 

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
532 green laser is used to laser mark on ceramic knife
532 green laser is used to laser mark on ceramic knife
532 green laser is used to laser mark on ceramic knife Using RFH 532nm green laser to laser mark on ceramic knife enables the pattern on it to be very clear and doesn’t affect its normal cutting performance. This maximizes the brand quality and the delicacy of the ceramic knife.   Today, RFH is going to share the case of a ceramic knife supplier whose peer recommends RFH 10W 532nm green laser to him.    As we all know, marking on a ceramic knife adopts a laser marking technique. The whole marking process on the ceramic knife is so simple and generally takes a few seconds to finish. But this seemingly “simple” process needs to be supported by a well-established technique.And that is a laser system with exceptional laser beam quality and its accessories. An excellent laser is the basis of 99% yield of laser marking product and the solid-state green laser produced by RFH with 13-year experience is the perfect example.   
532 green laser is used to laser mark on ceramic knife
RFH green laser is recommended by a peer of a ceramic knife supplier
RFH green laser is recommended by a peer of a ceramic knife supplier
With brand strength, RFH green laser is recommended by a peer of a ceramic knife supplier Using RFH 532nm green laser to laser mark on ceramic knife enables the pattern on it to be very clear and doesn’t affect its normal cutting performance. This maximizes the brand quality and the delicacy of the ceramic knife.   Today, RFH is going to share the case of a ceramic knife supplier whose peer recommends RFH 10W 532nm green laser to him.    As we all know, marking on a ceramic knife adopts a laser marking technique. The whole marking process on the ceramic knife is so simple and generally takes a few seconds to finish. But this seemingly “simple” process needs to be supported by a well-established technique.And that is a laser system with exceptional laser beam quality and its accessories. An excellent laser is the basis of 99% yield of laser marking product and the solid-state green laser produced by RFH with 13-year experience is the perfect example.   
RFH green laser is recommended by a peer of a ceramic knife supplier
RFH 532nm green laser marking glass with ±0.02mm High precision
RFH 532nm green laser marking glass with ±0.02mm High precision
RFH 532nm green laser marking glass with ±0.02mm High precision 532nm green laser is a great accomplishment of RFH which has 13 years of R&D experience. It has perfect beam spot quality(Beam Circularity>90%) , relatively short pulse width <35ns@30K with little heat transfer to surrounding material and exceptional beam quality (M²<1.3) absolutely assured in all repetition rates. These features of 532nm green laser guarantee fast marking speed and delicate marking performance.  In addition, RFH 532nm green laser has independent R&D in power supply technique,which enables timely update and improvement of power supply control system module based on the laser’s need. The unique Q-switching technology makes it applicable to a variety of control requirements of laser applications. Online refreshment for harmonic coupling technology ensures its long life time. Therefore, RFH 532nm green laser is very ideal to be integrated into UV laser glass marking machine.
RFH 532nm green laser marking glass with ±0.02mm High precision
Two more green lasers are ordered by a Singapore glassware laser marker
Two more green lasers are ordered by a Singapore glassware laser marker
Two more green lasers are ordered by a Singapore glassware laser marker 532nm green laser is a great accomplishment of RFH which has 13 years of R&D experience. It has perfect beam spot quality(Beam Circularity>90%) , relatively short pulse width <35ns@30K with little heat transfer to surrounding material and exceptional beam quality (M²<1.3) absolutely assured in all repetition rates. These features of 532nm green laser guarantee fast marking speed and delicate marking performance.  In addition, RFH 532nm green laser has independent R&D in power supply technique,which enables timely update and improvement of power supply control system module based on the laser’s need. The unique Q-switching technology makes it applicable to a variety of control requirements of laser applications. Online refreshment for harmonic coupling technology ensures its long life time. Therefore, RFH 532nm green laser is very ideal to be integrated into UV laser glass marking machine.
Two more green lasers are ordered by a Singapore glassware laser marker
532nm green laser engraving glass of car
532nm green laser engraving glass of car
532nm green laser engraving glass of car Using RFH 532nm green laser to mark LOGO on automobile windscreen can make sure the logo to be accurate, high-definition and long-lasting after long time driving.   High precision of ±0.002mm, high stability and high cost performance are the core advantages of RFH green laser.   RFH green laser features 532nm laser wavelength. It is this small laser wavelength that decides the excellent beam quality and small focal spot of the green laser. Therefore, it can perfectly meet the needs of ultra-precise marking of automobile windscreen with the minimum character being 0.02mm.  
532nm green laser engraving glass of car
RFH 532nm green laser is used to mark Logo on windscreen of luxurious automobile
RFH 532nm green laser is used to mark Logo on windscreen of luxurious automobile
RFH 532nm green laser is used to mark Logo on windscreen of luxurious automobile Using RFH 532nm green laser to mark LOGO on automobile windscreen can make sure the logo to be accurate, high-definition and long-lasting after long time driving.   High precision of ±0.002mm, high stability and high cost performance are the core advantages of RFH green laser.   RFH green laser features 532nm laser wavelength. It is this small laser wavelength that decides the excellent beam quality and small focal spot of the green laser. Therefore, it can perfectly meet the needs of ultra-precise marking of automobile windscreen with the minimum character being 0.02mm.  
RFH 532nm green laser is used to mark Logo on windscreen of luxurious automobile
RFH 35W green laser marking-glass logo, So Easy
RFH 35W green laser marking-glass logo, So Easy
RFH 35W green laser marking-glass logo, So Easy   South Korean customer Fach produces glass wine cups. Before, the factory also used a brand of green laser, but there were always some wine cups with little defects which were overheated during processing, causing the wine cups to scorch or even deform.   Introduced by a friend, Fach has learned that the RFH Expert III 532 green laser is very effective for marking glass. So he has ordered one from us and tested the effect. After using our laser, Fach said that the heat affected area of the laser during processing is very small, which is very suitable for their laser application, and there will be no scorching or deformation.    At the beginning of the month, I received a call from Fach again. Because of his expansion of the production line, he needed to order 5 green lasers again.  
RFH 35W green laser marking-glass logo, So Easy
RFH 532nm green laser marking glass without deformation
RFH 532nm green laser marking glass without deformation
RFH 532nm green laser marking glass without deformation   South Korean customer Fach produces glass wine cups. Before, the factory also used a brand of green laser, but there were always some wine cups with little defects which were overheated during processing, causing the wine cups to scorch or even deform.   Introduced by a friend, Fach has learned that the RFH Expert III 532 green laser is very effective for marking glass. So he has ordered one from us and tested the effect. After using our laser, Fach said that the heat affected area of the laser during processing is very small, which is very suitable for their laser application, and there will be no scorching or deformation.    At the beginning of the month, I received a call from Fach again. Because of his expansion of the production line, he needed to order 5 green lasers again.  
RFH 532nm green laser marking glass without deformation
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact