10W-15W uv laser

355nm UV laser marking heat shrinkable tube model and date

355nm UV laser marking heat shrinkable tube model and date

355nm UV laser marking heat shrinkable tube will not be deformed or burnt

What kind of laser marking machine is used to mark heat shrinkable tubing?

 

 

RFH 355nm ultraviolet laser has little thermal effect, avoiding deformation or scorching of the heat-shrinkable tube

The heat shrinkable tubing is made of radiation cross-linked polyolefin material, with excellent physical, chemical and electrical properties. The main functions are wire harness protection, electrical insulation of connectors, rust and corrosion protection of solder joints, and mechanical protection. The product is halogen-free and environmentally friendly, and has flame-retardant properties. It is widely used in automotive wiring harness, electronic components, communications and other fields. The heat shrinkable tube shrinks when heated, and it is very sensitive to heat. However, the 355nm ultraviolet laser has a very small focus spot and a small processing heat-affected zone, so there is almost no damage caused by heat, so it is called a cold source. Because of the extremely small heat-affected area of ​​the UV laser, there will be no thermal effect, and the problem of deformation or burnt when marking the model or date on the heat shrinkable tube is avoided.

  • Laser Wavelength:

    354.7nm
  • Average Output Power :

    3W-10W @30kHz
  • Pulse Width:

    <12ns @ 30kHz
  • Pulse Repetition Rate :

    10-200kHz
  • Beam Quality (㎡) :

    <1.2
  • Beam Diameter :

    0.8±0.2mm Measured at window
  • Beam Full Divergence Angle :

    <2mrad
  • Beam Circularity :

    >90%
  • Pulse-to-Pulse Stability :

    <2% RMS/@30kHz
  • Average Power Stability :

    <5% RMS/8hr
  • Beam-Pointing Drift :

    <30μrad/℃
  • Polarization Ratio :

    >100:1
  • Polarization Orientation :

    Horizontal
  • Operating Temp. & RH :

    10℃ to 30℃ | <80%
  • Storage Temp. & RH) :

    -20℃ to 65℃ | <90 %
  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase
  • Power Consumption :

    <500W
  • Warranty :

    18months
  • Product Detail
  • Video

uv laser

355nm UV laser marking heat shrinkable tube model and date

355nm UV laser marking heat shrinkable tube will not be deformed or burnt

What kind of laser marking machine is used to mark heat shrinkable tubing?

 

 

RFH 355nm ultraviolet laser has little thermal effect, avoiding deformation or scorching of the heat-shrinkable tube

The heat shrinkable tubing is made of radiation cross-linked polyolefin material, with excellent physical, chemical and electrical properties. The main functions are wire harness protection, electrical insulation of connectors, rust and corrosion protection of solder joints, and mechanical protection. The product is halogen-free and environmentally friendly, and has flame-retardant properties. It is widely used in automotive wiring harness, electronic components, communications and other fields. The heat shrinkable tube shrinks when heated, and it is very sensitive to heat. However, the 355nm ultraviolet laser has a very small focus spot and a small processing heat-affected zone, so there is almost no damage caused by heat, so it is called a cold source. Because of the extremely small heat-affected area of ​​the UV laser, there will be no thermal effect, and the problem of deformation or burnt when marking the model or date on the heat shrinkable tube is avoided.

 

How to choose a suitable 355nm UV laser manufacturer?

One. Look at the UV laser R&D team, qualifications

RFH Laser currently has a laser research and development team composed of domestic and foreign professors, experts, and doctors. It has set up application process research and development department, laser research and development department, electrical research and development department, 10 national patent certificates, 14 computer software copyright certificates, and won the " "High-tech Enterprise", "Shenzhen High-tech Enterprise", "Software Enterprise Certification Certificate" and other certificates

 

two. See the UV laser production process

RFH UV lasers are produced in dust-free workshops throughout the entire process, with a rigorous quality management system mechanism

From procurement-pre-production quality inspection control-rigorous assembly process-finished product testing-warehousing quality inspection-pre-delivery inspection-after-sales service, each level is checked to ensure stable quality and consistency of equipment parameters with actual operating parameters. This is the reason why the service life of RFH brand lasers is better than that of peers.

 

In addition, there is a one-to-one correspondence between the UV laser and the power supply. The stability of the power supply control system determines whether the laser can maximize its performance during operation. RFH has the advantages of independent research and development of power supply technology, which can update the function modules of the power control system in time, and improve the function modules according to the needs of the laser. Many manufacturers purchase power supplies instead of independent research and development, which is difficult to guarantee in terms of laser matching and stability.

 

Each laser product developed and produced by RFH can maintain consistent and stable quality, constant beam quality, and high-efficiency power consumption under extreme industrial and scientific research conditions. With the best cost performance and high reliability, it has won the domestic and foreign trades. Users from all walks of life are highly recognized and have a good reputation. After 12 years of hard work, we have established an excellent brand image in the nanosecond laser industry.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
3W UV laser marking machine comes standard with RFH 355nm UV laser
3W UV laser marking machine comes standard with RFH 355nm UV laser
3W UV laser marking machine comes standard with RFH 355nm UV laser 355nm UV laser has longer life and higher accuracy Ultraviolet laser is the best choice for laser marking machine manufacturers   Recently, some pharmaceutical packaging manufacturers have consulted the RFH Laser Editor and asked if we can recommend some more stable 3W UV laser marking machine brands. Now the laser marking machine in the factory will be intermittent when working. Well, we have many customers, this is not recommended, but we can give you a plan to help you effectively screen for UV laser processing equipment that can work stably.
3W UV laser marking machine comes standard with RFH 355nm UV laser
355nm UV laser has longer life and higher accuracy
355nm UV laser has longer life and higher accuracy
3W UV laser marking machine comes standard with RFH 355nm UV laser 355nm UV laser has longer life and higher accuracy Ultraviolet laser is the best choice for laser marking machine manufacturers   Recently, some pharmaceutical packaging manufacturers have consulted the RFH Laser Editor and asked if we can recommend some more stable 3W UV laser marking machine brands. Now the laser marking machine in the factory will be intermittent when working. Well, we have many customers, this is not recommended, but we can give you a plan to help you effectively screen for UV laser processing equipment that can work stably.
355nm UV laser has longer life and higher accuracy
Ultraviolet laser is the best choice for laser marking machine manufacturers
Ultraviolet laser is the best choice for laser marking machine manufacturers
3W UV laser marking machine comes standard with RFH 355nm UV laser 355nm UV laser has longer life and higher accuracy Ultraviolet laser is the best choice for laser marking machine manufacturers   Recently, some pharmaceutical packaging manufacturers have consulted the RFH Laser Editor and asked if we can recommend some more stable 3W UV laser marking machine brands. Now the laser marking machine in the factory will be intermittent when working. Well, we have many customers, this is not recommended, but we can give you a plan to help you effectively screen for UV laser processing equipment that can work stably.
Ultraviolet laser is the best choice for laser marking machine manufacturers
Is fiber laser or UV laser better for laser marking machine?
Is fiber laser or UV laser better for laser marking machine?
Is fiber laser or UV laser better for laser marking machine? UV laser has an unshakable position in the plastic marking industry Ultraviolet laser has a small focus spot, low thermal influence and high speed   Today, let’s discuss together: Is it better to use optical fiber for laser marking machine or UV?   Fiber laser marking machine and ultraviolet laser marking machine are different types of laser processing equipment, and their core components, processing principles and application fields are quite different. Below, let's make a specific comparison:  
Is fiber laser or UV laser better for laser marking machine?
UV laser has an unshakable position in the plastic marking industry
UV laser has an unshakable position in the plastic marking industry
Is fiber laser or UV laser better for laser marking machine? UV laser has an unshakable position in the plastic marking industry Ultraviolet laser has a small focus spot, low thermal influence and high speed   Today, let’s discuss together: Is it better to use optical fiber for laser marking machine or UV?   Fiber laser marking machine and ultraviolet laser marking machine are different types of laser processing equipment, and their core components, processing principles and application fields are quite different. Below, let's make a specific comparison:  
UV laser has an unshakable position in the plastic marking industry
Ultraviolet laser has a small focus spot, low thermal influence and high speed
Ultraviolet laser has a small focus spot, low thermal influence and high speed
Is fiber laser or UV laser better for laser marking machine? UV laser has an unshakable position in the plastic marking industry Ultraviolet laser has a small focus spot, low thermal influence and high speed   Today, let’s discuss together: Is it better to use optical fiber for laser marking machine or UV?   Fiber laser marking machine and ultraviolet laser marking machine are different types of laser processing equipment, and their core components, processing principles and application fields are quite different. Below, let's make a specific comparison:  
Ultraviolet laser has a small focus spot, low thermal influence and high speed
RFH 355 UV laser is used in food packaging laser marking machine
RFH 355 UV laser is used in food packaging laser marking machine
RFH 355 UV laser is used in food packaging laser marking machine In the laser marking processing industry, laser equipment is the most important production tool, and the stability of laser equipment affects the efficiency of the entire factory. The laser is the core part of laser equipment. Therefore, laser equipment manufacturers pay special attention to the quality of their products when purchasing lasers.   So, what about the quality of the laser? Today, RFH Laser Editor recommends a method to everyone: from the manufacturer's production process, especially the inspection process.
RFH 355 UV laser is used in food packaging laser marking machine
Ultraviolet laser has low thermal influence and high precision
Ultraviolet laser has low thermal influence and high precision
Ultraviolet laser has low thermal influence and high precision In the laser marking processing industry, laser equipment is the most important production tool, and the stability of laser equipment affects the efficiency of the entire factory. The laser is the core part of laser equipment. Therefore, laser equipment manufacturers pay special attention to the quality of their products when purchasing lasers.   So, what about the quality of the laser? Today, RFH Laser Editor recommends a method to everyone: from the manufacturer's production process, especially the inspection process.
Ultraviolet laser has low thermal influence and high precision
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

leave a message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact