10W-15W uv laser

532nm green laser has superior beam quality

RFH 532nm green laser matching 20W green laser marking machine

It only takes 0.2 seconds to mark the QR code of PCB circuit board with 532nm green laser

 532nm green laser has superior beam quality

 

Have you formulated your laser processing production plan for the new year? Do you plan to purchase or update your laser processing equipment? Today, the editor of RFH Laser recommends a green laser—RFH Excellent Ⅱ 532nm green laser (18W-35 W) to new friends in the industry. In the new year, it will be stable and dominate the laser marking market, it can help.

 

  • Laser Wavelength:

    532nm
  • Average Output Power :

    35W @50kHz
  • Pulse Width:

    <25ns @50kHz
  • Pulse Repetition Rate :

    10-200kHz
  • Spatial Mode:

    TEM00
  • Beam Quality (㎡) :

    <1.2
  • Beam Diameter:

    1.0±0.2mm Measured at window
  • Beam Full Divergence Angle :

    <1.2mrad
  • Beam Circularity:

    >90%
  • Pulse-To-Pulse Stability:

    <2% RMS/@30kHz
  • Average Power Stability :

    <3% RMS/8hr
  • Beam-Pointing Drift:

    <30μrad/℃
  • Polarization Ratio:

    >100:1
  • Polarization Orientation:

    Horizontal
  • Operating Temp. & RH:

    10℃ to 35℃ | <80%
  • Storage Temp. & RH:

    -20℃ to 65℃ | <90 %
  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase
  • Power Consumption:

    <5000W
  • Warranty :

    18months
  • Product Detail
  • Video

RFH 532nm green laser matching 20W green laser marking machine

It only takes 0.2 seconds to mark the QR code of PCB circuit board with 532nm green laser

 532nm green laser has superior beam quality

 

Have you formulated your laser processing production plan for the new year? Do you plan to purchase or update your laser processing equipment? Today, the editor of RFH Laser recommends a green laser—RFH Excellent Ⅱ 532nm green laser (18W-35 W) to new friends in the industry. In the new year, it will be stable and dominate the laser marking market, it can help.

 

Recommend this Excellent Ⅱ 532nm 18W-35 W green laser to new friends in the industry, not because it is a new product of RFH, but because it is a classic high-quality product of RFH. It constitutes a variety of 20W green laser marking machines at home and abroad, a variety of ceramic punching scribing machines with different powers, wafer marking machines, glass scribing machines for touch screens and LCD displays, solar thin film scribing machines, etc. Metal laser processing equipment has become the benchmark of this type of laser processing equipment with its superior performance, stability, speed and good performance.

 

Stability: Excellent Ⅱ 532nm green laser contains RFH's doctoral team independently researched and developed a laser dedicated power control system, which can update the power control system function modules in time, and improve the function modules according to laser requirements to ensure the stable operation of the entire laser system and power stability high. It also has an internal cavity self-purification system, which can help extend the life of the laser, help manufacturers reduce maintenance costs and save costs.

 

Fast: RFH Excellent Ⅱ 532nm green laser marking a regular size QR code on the PCB board only takes about 0.2 seconds, which is very fast.

 

Good: RFH Excellent Ⅱ 532nm green laser has superior beam quality (M2<1.2) and short pulse width <12ns@40k, which makes the marking effect very clear and delicate, and the heat affected area is small, which can help manufacturers improve the yield . Moreover, it also has a unique Q-switching control technology, which is suitable for various laser application control needs.

 

12 years of intensive brand cultivation and 12 years of excellence have made RFH a first-class enterprise capable of manufacturing first-class lasers and providing first-class laser technology and services.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
green laser takes 0.2 seconds to mark the QR code of PCB circuit board
green laser takes 0.2 seconds to mark the QR code of PCB circuit board
RFH 532nm green laser matching 20W green laser marking machine It only takes 0.2 seconds to mark the QR code of PCB circuit board with 532nm green laser  532nm green laser has superior beam quality   Have you formulated your laser processing production plan for the new year? Do you plan to purchase or update your laser processing equipment? Today, the editor of RFH Laser recommends a green laser—RFH Excellent Ⅱ 532nm green laser (18W-35 W) to new friends in the industry. In the new year, it will be stable and dominate the laser marking market, it can help.  
green laser takes 0.2 seconds to mark the QR code of PCB circuit board
532nm green laser matching 20W green laser marking machine
532nm green laser matching 20W green laser marking machine
RFH 532nm green laser matching 20W green laser marking machine It only takes 0.2 seconds to mark the QR code of PCB circuit board with 532nm green laser  532nm green laser has superior beam quality   Have you formulated your laser processing production plan for the new year? Do you plan to purchase or update your laser processing equipment? Today, the editor of RFH Laser recommends a green laser—RFH Excellent Ⅱ 532nm green laser (18W-35 W) to new friends in the industry. In the new year, it will be stable and dominate the laser marking market, it can help.  
532nm green laser matching 20W green laser marking machine
marking the bluetooth plastic box
3W5W UV laser marking the bluetooth plastic box without damage
3W5W UV laser marking the bluetooth plastic box without damage   With the continuous innovation of communication equipment, the birth of Bluetooth makes communication more convenient, no longer controlled by the wired headset. In terms of Bluetooth design and marking, continuous technological progress may be required.
marking the bluetooth plastic box
Solid-state UV laser
Solid-state UV laser has high marking accuracy
Why are 3w5w UV laser marking machines equipped with RFH 355nm UV laser Nanosecond UV lasers have superior beam quality Solid-state UV laser has high marking accuracy   At present, most of the laser power of UV laser marking equipment on the market is 3W~5W. The marking machine of this power range is most used in plastics, circuit boards, silicon wafers, LCD liquid crystal glass, glassware, Metal surface coatings, electronic components, wood, jade and other materials have a wide range of mature applications.   Among them, the lasers of 3W~5W ultraviolet laser marking machines in many factories are equipped with RFH. There are many reasons for this.
Solid-state UV laser
marking portable phone charger
The UV laser marking portable phone charger and earbuds data line
The UV laser marking portable phone charger and earbuds data line   Ultraviolet laser can engrave LOGO trademark, text, QR code, pattern, serial number, serial number, symbol, garbled number in ABS plastic shell and data cable shell. It has the characteristic of fast engraving speed, high production efficiency, long service life and simple operation, zero consumables, free modification of patterns and text, labor saving, full environmental protection. In addition, it engraving characters and patterns have the advantages of long-lasting color and no falling off.
marking portable phone charger
 engraves QR code on FPC circuit board
15W high-power UV laser engraves QR code on FPC circuit board
15W high-power UV laser engraves QR code on FPC circuit board Nowadays, QR codes have become an indispensable part of our daily necessities. We can use QR codes to pay, search, register and even store personal information. Engraving a QR code on the FPC circuit board can facilitate users to query and search for information, and to a large extent, it is convenient for consumers to use and search. But how to engrave a QR code on a limited or even narrow position on the FPC circuit board?
 engraves QR code on FPC circuit board
carved and customized on the wine glass
The 35W green laser is carved and customized on the wine glass, your unique wine glass
The 35W green laser is carved and customized on the wine glass, your unique wine glass   Red wine occupies a certain position on the dining table and wine table of contemporary people. The sweet taste, low alcohol content, and diversity of taste make many people fall in love with red wine. A good red wine must have a good cup. The custom carving process of the red wine glass can meet the customer's pursuit of personality. Special graphics are carved on the red wine glass to become a unique wine glass for customers. So, how to realize such an idea.
carved and customized on the wine glass
Cold Processed Food Packaging PE Film Bag
RFH 355nm UV Nanosecond Laser Cold Processed Food Packaging PE Film Bag
RFH 355nm UV Nanosecond Laser Cold Processed Food Packaging PE Film Bag   PE film, also known as polyethylene film, is usually thin and soft in texture, and can generally be used for wrapping films that are close to articles, such as mucous membranes, shrink films, protective films, etc. PE film is also commonly used in food packaging. As we all know, the food law stipulates that a lot of necessary information must be displayed on food packaging, which requires a special laser to complete the marking process on this material.
Cold Processed Food Packaging PE Film Bag
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

leave a message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact