10W-15W uv laser

K-6 Integrated UV Laser 4W-6W-8W

K-6 series UV DPSS laser, developed and produced by RFH, covers 4W/6W/8W in laser power with short pulse width (<20ns@30K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). K-6 series laser is ideal for high-end ultra-precise processing as well as marking in mobile phone shell , package of cosmetics, food, medicine and other high polymer materials, PCB, LCD, glassware surface, metal’s cladding material, plastic keypad, electronic component, gift, communication device, construction material and other areas.

  • Laser Wavelength:

    354.7nm
  • Average Output Power :

    4W/6W/8W @30kHz
  • Pulse Width:

    <20ns @ 30kHz
  • Pulse Repetition Rate :

    10-200kHz
  • Spatial Mode:

    TEM00
  • Beam Quality (㎡) :

    <1.2
  • Beam Diameter:

    0.8±0.1mm Measured at window
  • Beam Full Divergence Angle :

    <1.2mrad
  • Beam Circularity:

    >90%
  • Pulse-To-Pulse Stability:

    <3% RMS/@30kHz
  • Average Power Stability :

    <5% RMS/8hr
  • Beam-Pointing Drift:

    <25μrad/℃
  • Polarization Ratio:

    >100:1
  • Polarization Orientation:

    Horizontal
  • Operating Temp. & RH:

    10℃ to 35℃ | <90%
  • Storage Temp. & RH:

    -20℃ to 65℃ | <90 %
  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase
  • Power Consumption:

    <500W
  • Warranty :

    18months
  • Product Detail
  • Video

uv laser

K-6 series UV DPSS laser, developed and produced by RFH, covers 4W/6W/8W in laser power with short pulse width (<20ns@30K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). K-6 series laser is ideal for high-end ultra-precise processing as well as marking in mobile phone shell , package of cosmetics, food, medicine and other high polymer materials, PCB, LCD, glassware surface, metal’s cladding material, plastic keypad, electronic component, gift, communication device, construction material and other areas.

UV LASER

 

K-6 series uv laser characteristics:   

1. 355 nm output wavelength, 10 to 200 Hz repetition rate; laser power ranging from 4w/6w/8w; Continuous tuning of repetition rate while maintaining constant pulse energy, superior beam pointing and energy stability make the K-6 the first choice for micromachining, marking and thin film removal applications 

 

2. Exceptional beam quality (M²<1.2) ,absolutely assured in all repetition rates; relatively short pulse width <20ns@30K with little heat transfer to surrounding material; perfect beam spot quality(Beam Circularity>90%) 

Close to Gaussian smooth beam profile with low value M² < 1.2 and good focusability are beneficial for applications such as  

 

3. Unique Q-switching technology, adapts a variety of control requirements of laser applications;Online refreshment for harmonic coupling technology;Excellent long term power stability Rugged sealed cavity, Extremely compact size, Simple and robust 

 

4. Digital control technology for the driver,  RS232 control interface ensures easy control and integration with laser marking equipment 

 

5. This laser adopts one - style design with compact and reasonable structure, easy installation. 

Easy to transport and saves space due to compact and light design 

 

Water cooling,cost-effective and reliable end-pumping technology and amplifier-free DPSS design guarantee easy operation and alignment simple installation and low maintenance costs

 

6. Industrial production process control technology,provides quality stable products.

uv LASER

UV LASER

 

 

 RFH - The leading industrial solid-state laser manufacturer

 

For over 13 years with excellent long term stability and exceptional good beam quality

 

Production in dust-free plant & rigorous quality control system

From purchasing, pre-production quality check, assembling, finished product testing, warehouse-in inspection, pre-delivery testing to after-sales service, each step is under control to make sure product quality and consistency in both machine parameters and actual running parameters. This is what makes RFH laser lasts longer than its peers. 

RFH LASER

The whole part of power supply is integrated into the laser head

Core components of oversea brands with guaranteed quality

Pumping, Q-switching and other core components adopt oversea brands. Work with top brand component suppliers of home and abroad. Each component is guaranteed with its quality from the beginning of materials purchasing. This is why users can trust RFH laser.  

UV LASER

 

UV laser+cooling system sold in a group

Being client-oriented, RFH offers proposal of selling the whole laser system in a group so that the laser system can maximize its performance while maintaining its stability. 

UV LASER

 

Full-digital display, supporting communication with computer, capable of laser’s remote control

Each laser developed and produced by RFH can always remain high quality in industrial and extreme conditions of scientific research. With stable beam quality, high efficiency, best cost performance and high reliability, RFH has earned good reputation in different industries at home and abroad. After 12-year development, RFH has become a reputed brand in nanosecond laser industry. 

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

UV LASER

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
 KN95 mask marking
355mm UV cold light source, will not damage the mask
RFH UV laser is used for KN95 mask marking, less than one second 3W5W UV laser marking KN95 mask date and information 355mm UV cold light source, will not damage the mask   With the spread of the epidemic around the world, people's demand for masks continues to increase, and major mask manufacturers are also working hard to increase the production of masks. Among them, mask marking is an indispensable and important part of the production process. The printing mark of KN95 masks is generally printed on the outside of the mask. The content on it generally includes the mask model, related certificates, production date, etc., which is an important means of inspecting the quality and quality of the mask.
 KN95 mask marking
marking plastic switches and sockets
8 sets of 3W5W UV lasers for marking plastic switches and sockets
8 sets of 3W5W UV lasers for marking plastic switches and sockets   Yesterday, I received an order from Manager Li from Taiwan for 8 sets of 3W5W UV lasers, which were mainly used for marking plastic switches and sockets.
marking plastic switches and sockets
 marking PCB circuit board QR code
S9 UV laser marking PCB circuit board QR code
S9 UV laser marking PCB circuit board QR code S9 UV laser has long life and strong stability 355nm UV laser has cutting, marking and drilling technology   With the development of science and technology, the demand for smart products is increasing rapidly and becoming more and more popular. The representative one is intelligence, integrated communication, audio, and multimedia. In addition to powerful intelligent technology, its manufacturing process is becoming more and more sophisticated. Behind the thinner and lighter smartphones, there are high requirements for integrated hardware, such as circuit board integration and semiconductor chip integration. How to complete the manufacturing and processing of these integrated hardware? This has to be said, the classic version of the 355nm UV laser of the RFH brand.
 marking PCB circuit board QR code
Cutting sapphire with high power UV laser
Cutting sapphire with high power UV laser
RFH 3w5w UV laser marking speed is fast, clear, and has little thermal influence   Engraving sapphire with RFH ultraviolet laser, finer and more delicate marking   Cutting sapphire with high power UV laser   With the accelerated construction of 5G communication networks and terminal equipment on a global scale, the consumer electronics industry chain has ushered in a brand new track. In the 5G era, innovative breakthroughs in the appearance of consumer electronic products rely on technological improvements, while the changes in materials will have a deeper impact. As the situation changes, RFH laser equipment is conquering the sapphire laser cutting market, winning the trust of customers from all over the world.  
Cutting sapphire with high power UV laser
drilling PC circuit board
UV laser 355nm is also praised as a good helper for fine drilling PC circuit board
UV laser 355nm is also praised as a good helper for fine drilling PC circuit board   Amna from USA came to RFH dust-free production workshop. What he saw was a scene where a 0.1mm pore test was being performed on a PC board, which attracted all his attention.
drilling PC circuit board
Marking yoga mats
Marking yoga mats, RFH UV laser source has a solution
Marking yoga mats, RFH UV laser source has a solution   As young people pay more and more attention to health preservation, exercise and fitness, yoga, a project with a small area, simple foundation, and less cost, has gained popularity. The production of yoga mats has also expanded under the promotion of yoga. The special materials of yoga mats make it difficult to achieve under normal marking. Therefore, RFH UV laser sources have spent a lot of time on research.
Marking yoga mats
SLA light-curing 3D printer
SLA light-curing 3D printer manufacturer buys RFH 355 ultraviolet laser
SLA light-curing 3D printer manufacturer buys RFH 355 ultraviolet laser Diode pumped solid-state laser, wavelength 355nm, used for 3D SLA light curing  355nm UV laser used in SLA 3D printer   Today, we received an inquiries from SLA light-curing industrial-grade 3D printer manufacturers. Laser type requirements: diode-pumped solid-state laser, wavelength 355nm.   We recommend the RFH Expert Ⅱ 355nm UV laser to our customers. This model has excellent spot quality M²<1.2; export spot ellipticity>95%; fast cutting and marking speed; high precision, high power stability; internal cavity The self-purification system, the laser is long-lived and durable; the unique Q-switching control technology is suitable for various laser application control needs, and it also supports communication with the computer, which can maintain consistent and stable quality under extreme industrial and scientific research conditions.
SLA light-curing 3D printer
nanosecond ultraviolet laser
Food packaging film marking should choose RFH nanosecond ultraviolet laser
Food packaging film marking should choose RFH nanosecond ultraviolet laser   In the past, there were many shortcomings in the way of marking the production date of food packaging with ink jet coding. The uneven ink on the ink jet date was not beautiful enough for cooking, easy to erase, not environmentally friendly, and the material costs were very troublesome for customers.
nanosecond ultraviolet laser
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

leave a message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact