Exper III-Y-532-40-50

Expert III 532 series green DPSS laser, developed and produced by RFH, covers 35w in laser power with short pulse width (<25ns@50K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%).It is perfect for glass marking,thin film etching and surface treatment for most of the metals and non-metal materials, such as removing the oxide layer from the metal surface

Wuhan customer consulting to buy high frequency UV laser for 3d light curing SLA printer   SLA is one of the three key technologies used in 3D printing. In SLA technology 3D printing, the laser "pulls" the first layer of printed matter into the photosensitive resin, and after the first layer is completed, the laser is used to cure the next cross-section. , and repeat the same process with the laser until the entire part is complete. It can be seen that there is an important position in laser 3D photocuring SLA printing.

The Sila from Poland uses laser to remove paint glass surfaces. It chose RFH 5W ultraviolet laser to engrave at the beginning of the production line carved on the surface of the glass.

In the realm of precision and finesse, RFH brand emerges as a visionary leader, carrying the torch of mastery in the art of 355nm UV laser glass marking. With unrivaled expertise and cutting-edge technology, RFH brand's endeavor reaches new heights, showcasing an exquisite fusion of science and aesthetics.  

The RFH green laser relies on a non-contact method to radiate small light spots to scratch and cut on the surface of the PCB board.

532nm green laser can avoid bursting when the silicon wafer is punched   The process of scribing and marking a silicon wafer is complicated, but for Ruifengheng Green Laser it is a simple task. The use of green laser marking in the production of Ruifengheng can contract a series of work, as long as you debug, scribing, cutting and marking all can be solved. In addition, the accuracy and smoothness of marking and cutting can be ensured. In marking, the characters and patterns can be clearly carved on the silicon wafer and not easily blurred.

RFH UV laser is used for KN95 mask marking, less than one second 3W5W UV laser marking KN95 mask date and information 355mm UV cold light source, will not damage the mask   With the spread of the epidemic around the world, people's demand for masks continues to increase, and major mask manufacturers are also working hard to increase the production of masks. Among them, mask marking is an indispensable and important part of the production process. The printing mark of KN95 masks is generally printed on the outside of the mask. The content on it generally includes the mask model, related certificates, production date, etc., which is an important means of inspecting the quality and quality of the mask.

Fine pattern engraving and cutting on leather, 355nm UV laser can handle it calmly Chinese people have a long history of using leather goods. Even in contemporary times, all kinds of leather goods are also very popular.