10W-15W uv laser

RFH 15W high power UV laser cutting carbon fiber mobile phone case, smooth and burr-free

RFH 15W high power UV laser cutting carbon fiber mobile phone case, smooth and burr-free

 

Laser cutting carbon fiber phone case when using RFH high power UV laser

 

 

As an accessory for mobile phones, carbon fiber mobile phone cases have been favored by consumers in recent years. The mobile phone case can not only protect the mobile phone, but also show personal personality and taste, and the easy replacement method is also recognized by consumers.

  • Laser Wavelength:

    354.7nm
  • Average Output Power :

    10W/12W/15W @40kHz
  • Pulse Width:

    <20ns @40kHz
  • Pulse Repetition Rate :

    10-200kHz
  • Spatial Mode:

    TEM00
  • Beam Quality (㎡) :

    <1.2
  • Beam Diameter:

    0.8±0.1mm Measured at window
  • Beam Full Divergence Angle :

    <2mrad
  • Beam Circularity:

    >90%
  • Pulse-To-Pulse Stability:

    <3% RMS/@30kHz
  • Average Power Stability :

    <5% RMS/8hr
  • Beam-Pointing Drift:

    <25μrad/℃
  • Polarization Ratio:

    >100:1
  • Polarization Orientation:

    Horizontal
  • Operating Temp. & RH:

    10℃ to 35℃ | <80%
  • Storage Temp. & RH:

    10℃ to 35℃ | <90 %
  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase
  • Power Consumption:

    <800W
  • Warranty :

    18months
  • Product Detail
  • Video

uv laser

RFH 15W high power UV laser cutting carbon fiber mobile phone case, smooth and burr-free

 

Laser cutting carbon fiber phone case when using RFH high power UV laser

 

 

As an accessory for mobile phones, carbon fiber mobile phone cases have been favored by consumers in recent years. The mobile phone case can not only protect the mobile phone, but also show personal personality and taste, and the easy replacement method is also recognized by consumers.

 

However, the numerous and complicated mobile phone models on the market have also caused headaches for mobile phone case manufacturers, and how to quickly cut them has become a major problem.

 

RFH 15W high-power ultraviolet laser has helped dozens of manufacturers solve the problem of cutting mobile phone cases, and Mr. Chen from Dongguan is one of them.

 

When Mr. Chen came into contact with the RFH UV laser for the first time, he was attracted by its compact appearance. The small footprint and boxy shape are very pleasing no matter how you look at it. After the trial, Mr. Chen became more determined to cooperate with RFH.

 

What are the advantages of RFH 15w UV laser suitable for cutting carbon fiber mobile phone case?

 

1. In the process of cutting the mobile phone case, the RFH high-power ultraviolet laser will emit a very small light spot, and the cutting method with a precision of about 0.02mm can ensure that each model of carbon fiber mobile phone case is perfectly close to the mobile phone body, allowing the machine The waste caused by type mismatch no longer exists.

 

2. The cutting speed of RFH high-power ultraviolet laser is extremely fast, which is very suitable for Mr. Chen’s large-volume assembly line. The way of connecting the machine and running it also makes the consumables almost zero, which greatly reduces the production cost.

 

3. RFH UV lasers are all environmentally friendly materials, and will not produce any dust during the cutting process, and will not have any impact on the body. They are very friendly to the environment and to humans.

 

15w high power UV laser cutting carbon fiber samples

 

Like Mr. Chen, there are still many manufacturers who affirmed the design of RFH and reached an order agreement after using it. They all favor the design and precise and meticulous service accumulated by RFH for more than ten years. They chose RFH on the road of development, and they must also belong to RFH. pleasure.

 

Expert III 355 series UV DPSS laser, developed and produced by RFH, covers 10w-15w in laser power with short pulse width (<20ns@40K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). It is widely used in PE/PCB/FPC cutting, glass & sapphire cutting, drilling, scribing & cutting used in high precision micromaching areas.

UV LASER

 

Expert III 355 series uv laser characteristics:   

1. 355 nm output wavelength, 10 to 200 Hz repetition rate; laser power ranging from 10w-15w; Continuous tuning of repetition rate while maintaining constant pulse energy, superior beam pointing and energy stability make the Expert III 355 the first choice for micromachining, marking and thin film removal applications 

 

2. Exceptional beam quality (M²<1.2) ,absolutely assured in all repetition rates; relatively short pulse width <20ns@40K with little heat transfer to surrounding material; perfect beam spot quality(Beam Circularity>90%) 

Close to Gaussian smooth beam profile with low value M² < 1.2 and good focusability are beneficial for applications such as  

 

3. Unique Q-switching technology, adapts a variety of control requirements of laser applications;Online refreshment for harmonic coupling technology;Excellent long term power stability Rugged sealed cavity, Extremely compact size, Simple and robust 

 

4. Digital control technology for the driver,  RS232 control interface ensures easy control and integration with laser marking equipment 

 

5. This laser adopts one - style design with compact and reasonable structure, easy installation. 

Easy to transport and saves space due to compact and light design 

 

Water cooling,cost-effective and reliable end-pumping technology and amplifier-free DPSS design guarantee easy operation and alignment simple installation and low maintenance costs

 

6. Industrial production process control technology,provides quality stable products.

Nanosecond UV Laser

Nanosecond UV Laser

 

 RFH - The leading industrial solid-state laser manufacturer

 

For over 13 years with excellent long term stability and exceptional good beam quality

 

Production in dust-free plant & rigorous quality control system

From purchasing, pre-production quality check, assembling, finished product testing, warehouse-in inspection, pre-delivery testing to after-sales service, each step is under control to make sure product quality and consistency in both machine parameters and actual running parameters. This is what makes RFH laser lasts longer than its peers. 

RFH LASER

Top professional team, independent R&D in laser oriented power supply control system

 

There is a one-to-one correspondence between power supply and laser. The stability of power supply control system determines if the laser can maximize its performance during operation. RFH Laser has independent R&D in power supply technique which enables timely update and improvement of power supply control system module based on the laser’s need. 12-year experience in R&D and a top professional team make RFH laser a reliable and stable laser system.

LASER POWER SUPPLY

Core components of oversea brands with guaranteed quality

Pumping, Q-switching and other core components adopt oversea brands. Work with top brand component suppliers of home and abroad. Each component is guaranteed with its quality from the beginning of materials purchasing. This is why users can trust RFH laser.  

Nanosecond UV Laser

 

UV laser+power supply+cooling system sold in a group

Being client-oriented, RFH offers proposal of selling the whole laser system in a group so that the laser system can maximize its performance while maintaining its stability. 

Nanosecond UV Laser

 

Full-digital display, supporting communication with computer, capable of laser’s remote control

Each laser developed and produced by RFH can always remain high quality in industrial and extreme conditions of scientific research. With stable beam quality, high efficiency, best cost performance and high reliability, RFH has earned good reputation in different industries at home and abroad. After 12-year development, RFH has become a reputed brand in nanosecond laser industry. 

UV LASER

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
K-6 Integrated UV Laser 4W-6W
K-6 Integrated UV Laser 4W-6W-8W
K-6 series UV DPSS laser, developed and produced by RFH, covers 4W/6W/8W in laser power with short pulse width (<20ns@30K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). K-6 series laser is ideal for high-end ultra-precise processing as well as marking in mobile phone shell , package of cosmetics, food, medicine and other high polymer materials, PCB, LCD, glassware surface, metal’s cladding material, plastic keypad, electronic component, gift, communication device, construction material and other areas.
Download datasheet
K-6 Integrated UV Laser 4W-6W
Why RFH UV laser is often used in laser marking plastic button switch?
Why RFH UV laser is often used in laser marking plastic button switch
Why RFH UV laser is often used in laser marking plastic button switch? More and more manufacturers choose UV laser marking machine to create pattern and characters on the plastic button switch. The focal spot of UV laser is pretty small with little heat transfer to surrounding material, so UV laser is also called “cold light source”. Because of this feature, heat effect won’t occur. Thus, distorting or burning of materials is no longer an issue.    Professional UV laser manufacturer - Shenzhen RFH Laser Technology Co.,Ltd    With 13 years of experience, the S9 series nanosecond UV laser developed and produced by RFH can engrave clear characters on the keyboard and the mouse. These kinds of characters can not only help people identify different buttons in the dark but also last long, for there are slightly protruding part on the buttons. This improves the durability and practicability of the keyboard and the mouse.   
Why RFH UV laser is often used in laser marking plastic button switch?
UV laser
UV laser featuring cold processing for marking plastic button on keyboard
 UV laser featuring cold processing for marking plastic button on keyboard More and more manufacturers choose UV laser marking machine to create pattern and characters on the plastic button switch. The focal spot of UV laser is pretty small with little heat transfer to surrounding material, so UV laser is also called “cold light source”. Because of this feature, heat effect won’t occur. Thus, distorting or burning of materials is no longer an issue.    Professional UV laser manufacturer - Shenzhen RFH Laser Technology Co.,Ltd    With 13 years of experience, the S9 series nanosecond UV laser developed and produced by RFH can engrave clear characters on the keyboard and the mouse. These kinds of characters can not only help people identify different buttons in the dark but also last long, for there are slightly protruding part on the buttons. This improves the durability and practicability of the keyboard and the mouse.   
UV laser
RFH
S9-Y-355-10-40-T
This series of lasers is specially designed for laser marking machines, precision cutting machines, precision drilling machines, laser stripping machine, glass inner winning machine and pan painting equipment. It can meet the laser needs of various applications. The laser wavelength is 354.7 nm, the repetition frequency range is wide, can cover 10kHz to 200kHz. The power range is from 3.0 W to 10.0 W. Importantly, our laser strictly guarantees superior beam quality in all frequency ranges, with m' less than 1.2. This means that our lasers provide excellent beam quality regardless of the frequency used. In addition, our laser has a very small pulse width, less than 12 ns at 30 khz. This means that the heat affected area during processing is small, ensuring accuracy and quality of the results. We adopt a unique q-switched control technology to meet the control requirements of various laser applications. At the same time, our intelligent power control technology makes the operation and monitoring of the laser easy and convenient. You can also communicate with your computer via RS232 to externally control our lasers. Integrated design for easy integration with equipment. Whether you need laser marking, precision cutting, close drilling, laser stripping, glass inner victory or pan judgment paint, our S9-Y-355-10-40-T series lasers can provide you with high-quality laser performance and stable and reliable work.
RFH
RFH
Exper III-Y-532-40-50
Shenzhen RFH Laser Technology Co., Ltd. has launched the new Exper III-Y series green laser in 2024. This series features a water-cooled design and is a medium-power nanosecond pulsed 532nm green solid-state laser. It is specifically designed to meet the needs of high-speed precision laser processing production lines, ensuring efficiency and long-term stability and reliability. With its excellent performance and stability, the Exper III-Y series laser will play a crucial role in the field of precision processing, bringing new technological breakthroughs and application prospects to the industry.  
RFH
RFH
ExpertIII 355-15-50
Specializing in the field of high-precision processing, EXPERTIII 355-15-50 series lasers to provide you with a comprehensive and high-quality solution. Whether it is PE/PCB/FPC cutting, or glass, sapphire cutting, or high-definition micro-processing of drilling, marking, cutting, etc. , our laser can meet your needs. Our laser uses an efficient wavelength of 354.7 nm, covering a wide range of repetitive frequencies (10 khz to 200 khz) . Regardless of your application scenario, we provide excellent beam quality (m & LT; 1.2) . Moreover, we guarantee the consistency of beam quality in all frequency range. To minimize the heat-affected region, our laser uses a pulse width of less than 20ns@40k. This means that even at high frequencies, the processing is still excellent. In addition, we also use a unique q-switched control technology to meet the needs of various laser applications, in order to ensure the long life and stable operation of the laser, we also use the internal cavity self-purification system. This makes our laser not only long life, but also stable and reliable operation, in order to facilitate the operation and monitoring, we use the digital intelligent power control technology. This makes your operation easier and allows you to monitor the status of the laser in real time; in addition, our laser also supports communication with the computer and can be controlled externally through the R5232. This gives you more convenience and flexibility in your work. Our EXPERTIII 355-15-50 laser uses an integrated design to provide you with convenient equipment molding. Whether it is a small studio or a large production line, our laser can be perfectly adapted to help you achieve better results.
RFH
355nm UV laser
How can 355nm UV lasers be used in industrial production?
How can 355nm UV lasers be used in industrial production?   In modern industrial production, laser is an indispensable part. As the requirements for processing accuracy become more and more detailed, lasers are deeply involved in industrial links such as marking and cutting.
355nm UV laser
Laser engraving glass
Laser engraving glass, green laser or UV laser, which is better
Laser engraving glass, green laser or UV laser, which is better   At present, green lasers are widely used in the production of marking and engraving beer glasses, so many manufacturers have accelerated the promotion of production lines, and in fact, RFH UV lasers can also mark on glass.
Laser engraving glass
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact