RFH 20w UV laser deep engraving ceramic tile, can replace fiber laser marking
With the gradual maturity of UV laser technology, more and more applications use lasers to replace the original processing methods. RFH can easily complete the deep engraving of ceramic tiles, with fast, precise, smooth edges and many other characteristics.
RFH uses 20W high-power ultraviolet laser, through full digital power control technology and ultra-high accuracy, to easily overcome many difficulties in traditional tile processing.
Tile deep carving is not a niche technology, on the contrary, this processing method can be seen everywhere. Whether it is for practical needs such as aesthetics or non-slip, there are not a few deep-carved ceramic tiles on the market.
Even from a historical point of view, "brick carving" was once an art form and a life aesthetic hidden in the streets.
Over time, we have replaced blue bricks with tiles, but there is no substitute for that romance.
The most common way of deep carving of ceramic tiles is "sandblasting". In the early stage, a laser is used to draw the outline of the pattern, and then the deep carving is carried out by a sanding machine. After the layers are processed, the final product will be obtained.
Traditional processing methods are time-consuming and labor-intensive, and both material and labor costs remain high. Laser is obviously better than sandblasting.
With the continuous development of technology, high-power ultraviolet lasers above 10W have become more and more mature. They can not only engrave outlines, but also directly complete deep engraving operations.
Since laser tile deep engraving is "contactless processing", it is not easy to leave burrs on the engraved edge, and the depth can be easily maintained
RFH uses a 20W high-power UV laser, which not only simplifies the workflow and reduces processing costs, but also has faster speed, more accurate engraving, and easier operation.
RFH Expert III 355 High Power UV Pulsed Solid State Laser
RFH uses this Expert III 355 high-power ultraviolet laser to complete the deep carving of ceramic tiles. It is small in size and has a high degree of integration. It does not need to make a large optical path, saves costs, and is easy to integrate with various equipment.
RFH Expert III 355 uses a unique Q-switched control technology, suitable for various laser application control needs.
In addition to its compact size, the RFH Expert III 355 has a high accuracy of ±0.02mm, superior beam quality (M2<1.2), and is strictly guaranteed in all frequency ranges.
During processing, the pulse width has a great influence on the range of the heat affected zone. The pulse width of RFH Expert III 355 is <25ns@50k, so the edges are smooth and free of burrs.
Of course, in addition to its outstanding performance, the RFH Expert III 355 uses a unique cavity self-cleaning system, which enables the laser to have a long life and stable operation.
High stability and high cost performance are the consistent pursuit of RFH, and are also the constant advantages of RFH laser products
For a laser, the performance of the power supply will directly affect the effect of the final product. RFH has the technical advantages of independent research and development of power supplies, and can improve functional modules according to different needs. All-digital intelligent power control technology, simple operation and convenient monitoring.
After entering the era of Industry 4.0, digital processing and communication with computers will become new standards, RFH Expert III 355 supports communication with computers, and can control the laser externally through RS232
With the accumulation of more than 15 years of R&D technology, RFH Laser has produced an excellent high-power UV laser such as the Expert III 355.
The whole process of dust-free workshop production, rigorous assembly process, meticulous finished product testing, and perfect after-sales service are the reasons why the RFH brand is superior to its peers.
Expert III 355 series UV DPSS laser, developed and produced by RFH, covers 10w-15w in laser power with short pulse width (<20ns@40K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). It is widely used in PE/PCB/FPC cutting, glass & sapphire cutting, drilling, scribing & cutting used in high precision micromaching areas.
Expert III 355 series uv laser characteristics：
1. 355 nm output wavelength, 10 to 200 Hz repetition rate; laser power ranging from 10w-15w; Continuous tuning of repetition rate while maintaining constant pulse energy, superior beam pointing and energy stability make the Expert III 355 the first choice for micromachining, marking and thin film removal applications
2. Exceptional beam quality (M²<1.2) ，absolutely assured in all repetition rates; relatively short pulse width <20ns@40K with little heat transfer to surrounding material; perfect beam spot quality(Beam Circularity>90%)
Close to Gaussian smooth beam profile with low value M² < 1.2 and good focusability are beneficial for applications such as
3. Unique Q-switching technology, adapts a variety of control requirements of laser applications;Online refreshment for harmonic coupling technology;Excellent long term power stability Rugged sealed cavity, Extremely compact size, Simple and robust
4. Digital control technology for the driver, RS232 control interface ensures easy control and integration with laser marking equipment
5. This laser adopts one - style design with compact and reasonable structure, easy installation.
Easy to transport and saves space due to compact and light design
Water cooling，cost-effective and reliable end-pumping technology and amplifier-free DPSS design guarantee easy operation and alignment simple installation and low maintenance costs
6. Industrial production process control technology,provides quality stable products.
RFH - The leading industrial solid-state laser manufacturer
For over 13 years with excellent long term stability and exceptional good beam quality
Production in dust-free plant & rigorous quality control system
From purchasing, pre-production quality check, assembling, finished product testing, warehouse-in inspection, pre-delivery testing to after-sales service, each step is under control to make sure product quality and consistency in both machine parameters and actual running parameters. This is what makes RFH laser lasts longer than its peers.
Top professional team, independent R&D in laser oriented power supply control system
There is a one-to-one correspondence between power supply and laser. The stability of power supply control system determines if the laser can maximize its performance during operation. RFH Laser has independent R&D in power supply technique which enables timely update and improvement of power supply control system module based on the laser’s need. 12-year experience in R&D and a top professional team make RFH laser a reliable and stable laser system.
Core components of oversea brands with guaranteed quality
Pumping, Q-switching and other core components adopt oversea brands. Work with top brand component suppliers of home and abroad. Each component is guaranteed with its quality from the beginning of materials purchasing. This is why users can trust RFH laser.
UV laser+power supply+cooling system sold in a group
Being client-oriented, RFH offers proposal of selling the whole laser system in a group so that the laser system can maximize its performance while maintaining its stability.
Full-digital display, supporting communication with computer, capable of laser’s remote control
Each laser developed and produced by RFH can always remain high quality in industrial and extreme conditions of scientific research. With stable beam quality, high efficiency, best cost performance and high reliability, RFH has earned good reputation in different industries at home and abroad. After 12-year development, RFH has become a reputed brand in nanosecond laser industry.
