RFH 3w5w UV laser for SLA 3D printing
SLA 3D printers are filled with liquid photosensitive resin in the liquid tank, and then quickly solidified under the irradiation of the laser beam emitted by the laser to form the desired product. Generally, SLA 3D printers use UV lasers for curing.
RFH UV laser is currently the most commonly used UV laser source for SLA 3D printers on the market. Some RFH UV lasers can be selected with multiple frequencies, which can meet the curing needs of different resins to the greatest extent.
In the process of emitting ultraviolet laser, the radiation spot position of RFH ultraviolet laser is accurate, and it can be positioned and moved automatically, which greatly alleviates the problem of poor quality in the curing process.
Secondly, the RFH ultraviolet laser can be used continuously for 24 hours. During the use, the emission of the ultraviolet laser will not produce any pollution, and it is completely in an environment-friendly and dust-free state, which is very friendly to factories with high production requirements.
In addition, the configuration of the ultraviolet laser is very high, and it uses the most cutting-edge components on the market. The self-developed software is easy to control, and the lifelong technical support service also reduces the cost of personnel and makes the operation of the ultraviolet laser easier.
Although the SLA 3D printer has been born for many years, it is still an area that people do not understand enough. With the help of RFH ultraviolet lasers, the use of SLA 3D printers is more down-to-earth, saving costs and promoting this technology.
