10W-15W uv laser

RFH Ultraviolet (UV) Lasers marking black on white ceramic

An example of RFH ultraviolet laser blackening on ceramic surface, the text is clear, the color difference is obvious, and the efficiency is extremely high. Use RFH UV laser marking, which belongs to non-contact processing, which can ensure processing accuracy.

  • Laser Wavelength:

    354.7nm
  • Average Output Power :

    10W/12W/15W @40kHz
  • Pulse Width:

    <20ns @40kHz
  • Pulse Repetition Rate :

    10-200kHz
  • Spatial Mode:

    TEM00
  • Beam Quality (㎡) :

    <1.2
  • Beam Diameter:

    0.8±0.1mm Measured at window
  • Beam Full Divergence Angle :

    <2mrad
  • Beam Circularity:

    >90%
  • Pulse-To-Pulse Stability:

    <3% RMS/@30kHz
  • Average Power Stability :

    <5% RMS/8hr
  • Beam-Pointing Drift:

    <25μrad/℃
  • Polarization Ratio:

    >100:1
  • Polarization Orientation:

    Horizontal
  • Operating Temp. & RH:

    10℃ to 35℃ | <80%
  • Storage Temp. & RH:

    10℃ to 35℃ | <90 %
  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase
  • Power Consumption:

    <800W
  • Warranty :

    18months
  • Product Detail
  • Video

uv laser

RFH Ultraviolet (UV) Lasers marking black on white ceramic

 

Ceramic is a material widely used in industry, life, art and other fields. It has the advantages of high hardness, wear resistance, high temperature resistance and corrosion resistance. In order to meet different needs, ceramic surfaces usually need to be marked to display product information, brand logos, decorative patterns, etc.

 

As ceramic products penetrate into all aspects of life, the development of modern ceramic technology is very important. We need a new marking method that is more efficient, environmentally friendly, energy-saving, healthy and pollution-free.

 

Marking ceramic surfaces is no easy task:

 

1. Ceramic materials do not absorb laser light well, and will produce a large degree of diffuse reflection during marking, even close to total reflection, so it is difficult for lasers to mark and color ceramic surfaces.

 

2. Ceramic materials have the characteristics of high hardness, high brittleness, and low thermal conductivity, which are easy to cause damage such as cracks, falling off, and deformation.

 

3. Ceramic materials come in a variety of colors and shapes, and different processing methods are required to adapt to different marking requirements and effects.

 

Although it is not easy to mark the surface of ceramics, with the development of ultraviolet laser, in most cases, ultraviolet laser can be given priority.

 

An example of RFH ultraviolet laser blackening on ceramic surface, the text is clear, the color difference is obvious, and the efficiency is extremely high. Use RFH UV laser marking, which belongs to non-contact processing, which can ensure processing accuracy.

 

ceramice engraving with 355nm UV laser

Unlike traditional ink and other processing methods, when using ultraviolet laser marking, there is no pollution or harmful substances to the human body, and the efficiency is extremely high. Observe the characters carefully, the edges are clear and sharp, and it is still easy to face fine marking.

 

RFH Expert III 355 High Power UV Pulsed Solid-State Laser: Renewing Ceramics

 

RFH Expert III 355 series UV laser is a high-power, high-stability, high-precision UV semiconductor-pumped pulsed solid-state laser. Its advantages in ceramic marking are as follows:

 

1. RFH Expert III 355 has superior beam quality (M²<1.2) and perfect spot characteristics (spot ellipticity>90%), which can achieve high-precision, high-resolution, high-contrast marking effects, suitable for complex, Fine, aesthetically pleasing patterns can be marked on ceramic surfaces of various colors and shapes without pre- or post-treatment.

two,

2. RFH Expert III 355 has a short pulse width (<25ns@50k), and the heat-affected zone is very small during processing, which can avoid damages such as cracks, falling off, and deformation of ceramic materials, and maintain the original texture and appearance of ceramics.

 

3. RFH Expert III 355 has high power (up to 20W), which can provide more processing possibilities, while greatly improving production efficiency and saving costs.

 

 

In addition to the above advantages, RFH Expert III 355 series UV lasers also adopt unique Q-switching control technology, which can adapt to various laser application control requirements; this is a "laser dedicated power control system" independently developed by RFH, and also represents RFH 16 Years of research and development technology accumulation.

 

In addition, this power supply control system adopts all-digital intelligent control, which can communicate with the computer through the RS232 serial port, and accurately control the laser parameters externally.

 

The RFH Expert III 355 series UV laser has a small size and an integrated design, which is convenient for equipment integration, and there is no need to enlarge the optical path, further saving costs.

 

In RFH, the whole process of dust-free production, high-quality electronic components, rigorous assembly process, inspection before delivery and high-quality after-sales service are the reasons why RFH laser has a better reputation than its peers. After 16 years of ingenious forging, RFH has become a global manufacturer of industrial-grade all-solid-state lasers, with industry-leading technical capabilities.

Nanosecond UV Laser

UV LASER

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
UV laser
UV laser can cut screen protector tempered glass film with smooth and even cutting edges
RFH 355nm UV laser can cut screen protector tempered glass film with smooth and even cutting edges   With touch screen being increasingly used, the demand of mobile phone tempered glass film is also increasing. However, the sizes of different mobile phone brands are different, so the tempered glass film needs to be cut and drilled to required size. In the past, people used traditional CNC cutting technique on tempered glass film, but this method can easily lead to micro cracks or broken edges. So how to prevent tempered glass film from damaging during the cutting process? Well, RFH UV laser can help. The tempered glass film using RFH 355 series UV laser to drill and cut on won’t damage because of heat or crack because of instability. Instead, its cutting edges are quite smooth and the drilled holes are very round, making it more suitable to be used in smart phones.
UV laser
RFH UV laser for cutting and drilling screen protector tempered glass film for for iPhone
RFH UV laser for cutting and drilling screen protector tempered glass film for for iPhone
RFH UV laser for cutting and drilling screen protector tempered glass film for for iPhone With touch screen being increasingly used, the demand of mobile phone tempered glass film is also increasing. However, the sizes of different mobile phone brands are different, so the tempered glass film needs to be cut and drilled to required size. In the past, people used traditional CNC cutting technique on tempered glass film, but this method can easily lead to micro cracks or broken edges. So how to prevent tempered glass film from damaging during the cutting process? Well, RFH UV laser can help. The tempered glass film using RFH 355 series UV laser to drill and cut on won’t damage because of heat or crack because of instability. Instead, its cutting edges are quite smooth and the drilled holes are very round, making it more suitable to be used in smart phones.   
RFH UV laser for cutting and drilling screen protector tempered glass film for for iPhone
 3W5W UV laser
3W5W UV laser creates endurable marking on plastic tube
RFH 3W5W UV laser creates endurable marking on plastic tube To make the patterns and words on the plastic tube more durable, many tube manufacturers choose to use UV laser to mark on the plastic tube. Recently, Mr. Chen, who is a tube producer, ordered two units of UV laser marking machine and selected RFH 355 series UV laser as the laser generator.   RFH UV lasers feature with ultra-compact, high stability, high efficiency, high reliability and excellent laser beam quality.   The UV laser produced by RFH can solve the problem of marking on glossy tube. Using this UV laser can mark durable patterns and words on the surface of the plastic tube thoroughly against oxidation. This greatly help extend the service lifetime of the plastic tube.   
 3W5W UV laser
355nm UV laser
355nm UV laser is used to do antioxidant marking on plastic tube
355nm UV laser is used to do antioxidant marking on plastic tube To make the patterns and words on the plastic tube more durable, many tube manufacturers choose to use UV laser to mark on the plastic tube. Recently, Mr. Chen, who is a tube producer, ordered two units of UV laser marking machine and selected RFH 355 series UV laser as the laser generator.   RFH UV lasers feature with ultra-compact, high stability, high efficiency, high reliability and excellent laser beam quality.   The  UV laser produced by RFH can solve the problem of marking on glossy tube. Using this UV laser can mark durable patterns and words on the surface of the plastic tube thoroughly against oxidation. This greatly help extend the service lifetime of the plastic tube.   
355nm UV laser
Using RFH UV laser to mark on plastic package with incredible speed
Using UV laser to mark on plastic package with incredible speed
Using RFH UV laser to mark on plastic package with incredible speed Production date is the key information on food plastic package and needs to be clear and recognizable for consumers. To prevent the retailers from reselling the expired food to the consumers by replacing the old production date with the new one, more and more food producers choose to use UV laser marking machine to mark production date on the food package.   Last week, a food producer from Shantou ordered 2 units of UV laser marking machines which are equipped with RFH UV laser. After using RFH UV laser to mark on food plastic package, the marking speed becomes incredibly fast, for it takes less than a second to finish the marking process. This makes RFH UV laser very ideal for flying laser marking and assembly ling marking with faster marking speed and high quality.   
Using RFH UV laser to mark on plastic package with incredible speed
RFH 355 UV laser can create clear and lasting marking on plastic package
RFH 355 UV laser can create clear and lasting marking on plastic package
RFH 355 UV laser can create clear and lasting marking on plastic package Production date is the key information on food plastic package and needs to be clear and recognizable for consumers. To prevent the retailers from reselling the expired food to the consumers by replacing the old production date with the new one, more and more food producers choose to use UV laser marking machine to mark production date on the food package.   Last week, a food producer from Shantou ordered 2 units of UV laser marking machines which are equipped with RFH UV laser. After using RFH UV laser to mark on food plastic package, the marking speed becomes incredibly fast, for it takes less than a second to finish the marking process. This makes RFH UV laser very ideal for flying laser marking and assembly ling marking with faster marking speed and high quality.   
RFH 355 UV laser can create clear and lasting marking on plastic package
355nm UV laser cutting PCB with no burrs and no glue overflow
355nm UV laser cutting PCB with no burrs and no glue overflow
355nm UV laser cutting PCB with no burrs and no glue overflow FPC requires a laser cutting machine to depanel and then install on different electronics. As all know, UV laser plays an important role in FPC laser cutting machine. It is a cold light source with small heat-affecting zone of 10μm, making it applicable to perform cutting, depaneling, drilling on FPC and rigid-flex PCB with perfect cutting performance.   With fast speed, high precision of ±0.02mm and high stability, RFH 355 series UV laser has become a well-known brand among FPC and PCB cutting, drilling, depanling and engraving clients.   
355nm UV laser cutting PCB with no burrs and no glue overflow
RFH UV laser is applicable to cut, drill an depanel on FPC
RFH UV laser is applicable to cut, drill an depanel on FPC
RFH UV laser is applicable to cut, drill an depanel on FPC FPC requires a laser cutting machine to depanel and then install on different electronics. As all know, UV laser plays an important role in FPC laser cutting machine. It is a cold light source with small heat-affecting zone of 10μm, making it applicable to perform cutting, depaneling, drilling on FPC and rigid-flex PCB with perfect cutting performance.   With fast speed, high precision of ±0.02mm and high stability, RFH 355 series UV laser has become a well-known brand among FPC and PCB cutting, drilling, depanling and engraving clients.   
RFH UV laser is applicable to cut, drill an depanel on FPC
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact