10W-15W uv laser

Ultraviolet laser has the characteristics of fast speed and high power stability

Ultraviolet laser light source for PCB QR code laser coding equipment is more refined

355nm UV laser is often used for FPC two-dimensional code laser marking

Ultraviolet laser has the characteristics of fast speed and high power stability

 

The 355nm UV laser developed and produced by RFH is often used for FPC 2D code laser marking. The marking line width is narrow, the 2D code is fine, and the rating of the 2D code can reach A+. Mass production is in A or A-, marking the 2D code. With high reliability and quality, it is often used in PCB QR code laser coding equipment with high matching requirements.

  • Laser Wavelength:

    354.7nm
  • Average Output Power :

    10W/12W/15W @40kHz
  • Pulse Width:

    <20ns @40kHz
  • Pulse Repetition Rate :

    10-200kHz
  • Spatial Mode:

    TEM00
  • Beam Quality (㎡) :

    <1.2
  • Beam Diameter:

    0.8±0.1mm Measured at window
  • Beam Full Divergence Angle :

    <2mrad
  • Beam Circularity:

    >90%
  • Pulse-To-Pulse Stability:

    <3% RMS/@30kHz
  • Average Power Stability :

    <5% RMS/8hr
  • Beam-Pointing Drift:

    <25μrad/℃
  • Polarization Ratio:

    >100:1
  • Polarization Orientation:

    Horizontal
  • Operating Temp. & RH:

    10℃ to 35℃ | <80%
  • Storage Temp. & RH:

    10℃ to 35℃ | <90 %
  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase
  • Power Consumption:

    <800W
  • Warranty :

    18months
  • Product Detail
  • Video

Ultraviolet laser light source for PCB QR code laser coding equipment is more refined

355nm UV laser is often used for FPC two-dimensional code laser marking

Ultraviolet laser has the characteristics of fast speed and high power stability

 

The 355nm UV laser developed and produced by RFH is often used for FPC 2D code laser marking. The marking line width is narrow, the 2D code is fine, and the rating of the 2D code can reach A+. Mass production is in A or A-, marking the 2D code. With high reliability and quality, it is often used in PCB QR code laser coding equipment with high matching requirements.

 

Ultraviolet laser marking uses the laser thermal effect to ablate the surface material of the object, leaving a permanent mark. It has the advantages of non-contact marking, low cost, no consumables, good permanence, no deformation, no pollution, high speed, high stability, and high precision engraving.

 

In the fierce market competition, only continuous technological innovation and high quality reputation will last long. RFH is the leader among them. In recent years, RFH lasers have invested a lot of research and development funds in the application of PCB and FPC industries, and made a lot of technical reserves. RFH laser products have brought customers excellent production processes and manufacturing processes.

 

RFH 13 years of hard work, not only satisfied with the manufacture of high-quality lasers, we also consider from the user's point of view, launch a complete system sales program of power supply + laser + cooling system to ensure the stability of the entire laser system and give full play to the best performance. Because of this, we have won high recognition and good reputation from users in all walks of life at home and abroad, and established an excellent brand image in the nanosecond laser industry.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
3W UV laser marking machine comes standard with RFH 355nm UV laser
3W UV laser marking machine comes standard with RFH 355nm UV laser
3W UV laser marking machine comes standard with RFH 355nm UV laser 355nm UV laser has longer life and higher accuracy Ultraviolet laser is the best choice for laser marking machine manufacturers   Recently, some pharmaceutical packaging manufacturers have consulted the RFH Laser Editor and asked if we can recommend some more stable 3W UV laser marking machine brands. Now the laser marking machine in the factory will be intermittent when working. Well, we have many customers, this is not recommended, but we can give you a plan to help you effectively screen for UV laser processing equipment that can work stably.
3W UV laser marking machine comes standard with RFH 355nm UV laser
355nm UV laser has longer life and higher accuracy
355nm UV laser has longer life and higher accuracy
3W UV laser marking machine comes standard with RFH 355nm UV laser 355nm UV laser has longer life and higher accuracy Ultraviolet laser is the best choice for laser marking machine manufacturers   Recently, some pharmaceutical packaging manufacturers have consulted the RFH Laser Editor and asked if we can recommend some more stable 3W UV laser marking machine brands. Now the laser marking machine in the factory will be intermittent when working. Well, we have many customers, this is not recommended, but we can give you a plan to help you effectively screen for UV laser processing equipment that can work stably.
355nm UV laser has longer life and higher accuracy
Ultraviolet laser is the best choice for laser marking machine manufacturers
Ultraviolet laser is the best choice for laser marking machine manufacturers
3W UV laser marking machine comes standard with RFH 355nm UV laser 355nm UV laser has longer life and higher accuracy Ultraviolet laser is the best choice for laser marking machine manufacturers   Recently, some pharmaceutical packaging manufacturers have consulted the RFH Laser Editor and asked if we can recommend some more stable 3W UV laser marking machine brands. Now the laser marking machine in the factory will be intermittent when working. Well, we have many customers, this is not recommended, but we can give you a plan to help you effectively screen for UV laser processing equipment that can work stably.
Ultraviolet laser is the best choice for laser marking machine manufacturers
Is fiber laser or UV laser better for laser marking machine?
Is fiber laser or UV laser better for laser marking machine?
Is fiber laser or UV laser better for laser marking machine? UV laser has an unshakable position in the plastic marking industry Ultraviolet laser has a small focus spot, low thermal influence and high speed   Today, let’s discuss together: Is it better to use optical fiber for laser marking machine or UV?   Fiber laser marking machine and ultraviolet laser marking machine are different types of laser processing equipment, and their core components, processing principles and application fields are quite different. Below, let's make a specific comparison:  
Is fiber laser or UV laser better for laser marking machine?
UV laser has an unshakable position in the plastic marking industry
UV laser has an unshakable position in the plastic marking industry
Is fiber laser or UV laser better for laser marking machine? UV laser has an unshakable position in the plastic marking industry Ultraviolet laser has a small focus spot, low thermal influence and high speed   Today, let’s discuss together: Is it better to use optical fiber for laser marking machine or UV?   Fiber laser marking machine and ultraviolet laser marking machine are different types of laser processing equipment, and their core components, processing principles and application fields are quite different. Below, let's make a specific comparison:  
UV laser has an unshakable position in the plastic marking industry
Ultraviolet laser has a small focus spot, low thermal influence and high speed
Ultraviolet laser has a small focus spot, low thermal influence and high speed
Is fiber laser or UV laser better for laser marking machine? UV laser has an unshakable position in the plastic marking industry Ultraviolet laser has a small focus spot, low thermal influence and high speed   Today, let’s discuss together: Is it better to use optical fiber for laser marking machine or UV?   Fiber laser marking machine and ultraviolet laser marking machine are different types of laser processing equipment, and their core components, processing principles and application fields are quite different. Below, let's make a specific comparison:  
Ultraviolet laser has a small focus spot, low thermal influence and high speed
RFH 355 UV laser is used in food packaging laser marking machine
RFH 355 UV laser is used in food packaging laser marking machine
RFH 355 UV laser is used in food packaging laser marking machine In the laser marking processing industry, laser equipment is the most important production tool, and the stability of laser equipment affects the efficiency of the entire factory. The laser is the core part of laser equipment. Therefore, laser equipment manufacturers pay special attention to the quality of their products when purchasing lasers.   So, what about the quality of the laser? Today, RFH Laser Editor recommends a method to everyone: from the manufacturer's production process, especially the inspection process.
RFH 355 UV laser is used in food packaging laser marking machine
Ultraviolet laser has low thermal influence and high precision
Ultraviolet laser has low thermal influence and high precision
Ultraviolet laser has low thermal influence and high precision In the laser marking processing industry, laser equipment is the most important production tool, and the stability of laser equipment affects the efficiency of the entire factory. The laser is the core part of laser equipment. Therefore, laser equipment manufacturers pay special attention to the quality of their products when purchasing lasers.   So, what about the quality of the laser? Today, RFH Laser Editor recommends a method to everyone: from the manufacturer's production process, especially the inspection process.
Ultraviolet laser has low thermal influence and high precision
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact