10W-15W uv laser

Why engraving watch glass, it is best to use RFH high-precision UV laser

Why engraving watch glass, it is best to use RFH high-precision UV laser

 

Watches are one of the accessories that people like to wear very much. No matter from a single accessory or from the overall collocation, watches are accessories that show people's status and taste very well, and this situation is more prominent in modern society. Many watch factories have been looking for a new way to cut and mark glass dials to speed up production and increase efficiency.

  • Laser Wavelength:

    354.7nm
  • Average Output Power :

    3W-10W @30kHz
  • Pulse Width:

    <12ns @ 30kHz
  • Pulse Repetition Rate :

    10-200kHz
  • Beam Quality (㎡) :

    <1.2
  • Beam Diameter :

    0.8±0.2mm Measured at window
  • Beam Full Divergence Angle :

    <2mrad
  • Beam Circularity :

    >90%
  • Pulse-to-Pulse Stability :

    <2% RMS/@30kHz
  • Average Power Stability :

    <5% RMS/8hr
  • Beam-Pointing Drift :

    <30μrad/℃
  • Polarization Ratio :

    >100:1
  • Polarization Orientation :

    Horizontal
  • Operating Temp. & RH :

    10℃ to 30℃ | <80%
  • Storage Temp. & RH) :

    -20℃ to 65℃ | <90 %
  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase
  • Power Consumption :

    <500W
  • Warranty :

    18months
  • Product Detail
  • Video

uv laser

Why engraving watch glass, it is best to use RFH high-precision UV laser

 

laser engraving glass

 

Watches are one of the accessories that people like to wear very much. No matter from a single accessory or from the overall collocation, watches are accessories that show people's status and taste very well, and this situation is more prominent in modern society. Many watch factories have been looking for a new way to cut and mark glass dials to speed up production and increase efficiency.

 

Mr. Liu from Dongguan recently visited RFH and hoped to order a laser machine, proficient in glass dial cutting and marking, one machine for two purposes, saving costs and increasing efficiency. Therefore, the RFH staff recommended nanosecond solid-state ultraviolet lasers for him.

 

The nanosecond solid-state ultraviolet laser is a classic product of RFH. It is the master of RFH's research and development. It can emit 355nm ultraviolet light. Through non-contact cold processing, the glass dial can be cut or marked quickly. Ultraviolet laser is very suitable for glass processing. Its power is suitable for the hardness and thickness of the dial. The micron-level focused spot controls the processing accuracy and speed well. It has high contrast and good definition, and plays an important role in anti-counterfeiting and traceability.

 

In addition, RFH nanosecond UV lasers have two types of water cooling and air cooling, which can provide customization and multiple options, bringing greater technical space and production methods.

 

Mr. Liu is very satisfied with RFH's nanosecond UV laser, and ordered one to participate in the production, and gave very good feedback. In the few years after R&D, RFH nanosecond ultraviolet laser has helped many small and medium-sized enterprises grow rapidly and make progress together, and continue to go far on the road of becoming a first-line laser enterprise.

 

To meet the market demand, RFH newly developed S9 series UV laser in 2020. Comparing with its kinds, S9 series UV laser features with rugged sealed cavity, extremely compact size, simple and robust, high stability, high efficiency, high reliability and excellent laser beam quality.Its compact design suggests no necessity in building big light path, which greatly reduces space and cost and makes it easy to be installed into UV laser marking machines. In addition, S9 series cavity structure is more stability and more excellent scalability, which means the same laser cavity can be produces multi-power lasers , and the stability of different power ranges is greatly improved.

UV LASER

 

S9 series uv laser characteristics:   

1. 355 nm output wavelength, Up to 200 Hz repetition rate; laser power ranging from 3w-10w; Continuous tuning of repetition rate while maintaining constant pulse energy, superior beam pointing and energy stability make the S9 the first choice for micromachining, marking and thin film removal applications 

 

2. Exceptional beam quality (M²<1.2) ,absolutely assured in all repetition rates; relatively short pulse width <12ns@30 with little heat transfer to surrounding material; perfect beam spot quality(Beam Circularity>90%) 

Close to Gaussian smooth beam profile with low value M² < 1.2 and good focusability are beneficial for applications such as  

 

3. Unique Q-switching technology, adapts a variety of control requirements of laser applications;Online refreshment for harmonic coupling technology;Excellent long term power stability Rugged sealed cavity, Extremely compact size, Simple and robust 

 

4. Digital control technology for the driver,  RS232 control interface ensures easy control and integration with laser marking equipment 

 

5. This laser adopts one - style design with compact and reasonable structure, easy installation. 

Easy to transport and saves space due to compact and light design 

 

Water cooling,cost-effective and reliable end-pumping technology and amplifier-free DPSS design guarantee easy operation and alignment simple installation and low maintenance costs

 

6. Industrial production process control technology,provides quality stable products.

S9 uv laser

S9 355nm UV LASER

 RFH - The leading industrial solid-state laser manufacturer

 

For over 13 years with excellent long term stability and exceptional good beam quality

 

Production in dust-free plant & rigorous quality control system

From purchasing, pre-production quality check, assembling, finished product testing, warehouse-in inspection, pre-delivery testing to after-sales service, each step is under control to make sure product quality and consistency in both machine parameters and actual running parameters. This is what makes RFH laser lasts longer than its peers. 

RFH LASER

 

Top professional team, independent R&D in laser oriented power supply control system

There is a one-to-one correspondence between power supply and laser. The stability of power supply control system determines if the laser can maximize its performance during operation. RFH Laser has independent R&D in power supply technique which enables timely update and improvement of power supply control system module based on the laser’s need. 12-year experience in R&D and a top professional team make RFH laser a reliable and stable laser system.

LASER POWER SUPPLY

 

Core components of oversea brands with guaranteed quality

Pumping, Q-switching and other core components adopt oversea brands. Work with top brand component suppliers of home and abroad. Each component is guaranteed with its quality from the beginning of materials purchasing. This is why users can trust RFH laser.  

5W uv laser

 

Power supply+laser head+cooling system sold in a group

Being client-oriented, RFH offers proposal of selling the whole laser system in a group so that the laser system can maximize its performance while maintaining its stability. 

uv  laser

 

Full-digital display, supporting communication with computer, capable of laser’s remote control

Each laser developed and produced by RFH can always remain high quality in industrial and extreme conditions of scientific research. With stable beam quality, high efficiency, best cost performance and high reliability, RFH has earned good reputation in different industries at home and abroad. After 12-year development, RFH has become a reputed brand in nanosecond laser industry. 

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

UV LASER

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
355nm UV laser lettering peeling paint for keyboard
355nm UV laser lettering peeling paint for keyboard
355nm UV laser lettering peeling paint for keyboard
355nm UV laser lettering peeling paint for keyboard
RFH 355nm UV laser
355nm UV laser precisely marking mobile phone shell, charger
355nm UV laser precisely marking mobile phone shell, charger   There are too many objects in our lives that need to be decorated and shaped. Precise marking can make a high-precision engraving on the surface of different materials. Daily necessities such as mobile phone shells, panel glass, chargers, earphone cables, etc. all need the super marking technology. Ery from Germany recently came to RFH to learn about UV lasers for the precise marking.
RFH 355nm UV laser
3w5w10w UV lasers
3w5w10w UV lasers are widely used in marking, cutting and drilling
The ultraviolet nanosecond laser launched by RFH is the result of the company's years of experience in ultraviolet laser research and development. Compared with similar types of ultraviolet lasers at home and abroad, it has a reliable structural output design, excellent beam quality and extremely high laser stability. Features, cost-effective advantages are obvious, can be widely used in laser marking, cutting and drilling and other precision processing fields. The smaller size can avoid the user from enlarging the optical path, and the light output is more stable. It can be better absorbed by the material, and has little damage to the material. The superior beam quality can be strictly guaranteed in all frequency ranges; the heat-affected area is extremely small during processing. Longer life, stable operation and extremely low maintenance cost.
3w5w10w UV lasers
355nm UV laser has longer life and higher accuracy
355nm UV laser has longer life and higher accuracy
3W UV laser marking machine comes standard with RFH 355nm UV laser 355nm UV laser has longer life and higher accuracy Ultraviolet laser is the best choice for laser marking machine manufacturers   Recently, some pharmaceutical packaging manufacturers have consulted the RFH Laser Editor and asked if we can recommend some more stable 3W UV laser marking machine brands. Now the laser marking machine in the factory will be intermittent when working. Well, we have many customers, this is not recommended, but we can give you a plan to help you effectively screen for UV laser processing equipment that can work stably.
355nm UV laser has longer life and higher accuracy
uv 355nm laser module coding
Engraving glass bottle production date by uv 355nm laser module coding
Engraving glass bottle production date by  uv 355nm laser module coding
uv 355nm laser module coding
mark glass
532nm green laser has the precise spot to mark glass
532nm green laser has the precise spot to mark glass   Whether it is glass art, glassware or glass buildings, the usage of glass marking is indispensable. The touchless marking technology of the green laser was recognized by the customer. He went directly to the Shenzhen headquarters of RFH to order 3 green lasers.
mark glass
curing SLA 3D model
355nm UV laser light curing SLA 3D model, bringing a new revolution
355nm UV laser light curing SLA 3D model, bringing a new revolution 3D printing is a very popular solid model manufacturing technology. In fact, it has appeared in the 1990s and is now more widely used in the direct production of some industrial products. 3D printing is the latest rapid prototyping device using technologies such as photo curing and paper lamination, and photo curing refers to lasers. The stability of the laser is very important in 3D printing technology, so it has become a key consideration for some manufacturers when purchasing 3D printing equipment.
curing SLA 3D model
355nm DPSS Lasers engraving PCB Boards
355nm DPSS Lasers engraving PCB Boards
355nm DPSS Lasers engraving PCB Boards   Plastics can be seen everywhere in our lives, and colored plastics have also become the most widely used materials, whether in beverage bottles, handicrafts, or building materials. In the past, marking on colored plastics usually used the ink jet coding method, but this method is prone to pollution and the marking effect is not good, so the ultraviolet laser has a stage to play.  
355nm DPSS Lasers engraving PCB Boards
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

leave a message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact