10W-15W uv laser
Products
Home

Knowledge

 355nm UV laser marking carbon fiber badminton racket

355nm UV laser marking
355nm UV laser marking 355nm UV laser marking 355nm UV laser marking 355nm UV laser marking 355nm UV laser marking 355nm UV laser marking 355nm UV laser marking

355nm UV laser marking carbon fiber badminton racket

The manufacturer of carbon fiber badminton rackets, Mr. Zhao from Hengyang came to Ruifengheng recently, hoping to find a suitable technology for the marking process on badminton rackets, and hope that this process can be marked with anti-counterfeiting effect. So, the sales staff of Ruifengheng recommended a 355nm UV laser for him.

 

Ceramics are widely used in industry. Because ceramics have a series of advantages such as high temperature resistance, corrosion resistance, wear resistance, erosion resistance, etc., they can replace many metal materials and are sufficient to cope with harsh industrial standards.

  • Laser Wavelength:

    354.7nm

  • Average Output Power :

    10W/12W/15W @40kHz

  • Pulse Width:

    <20ns @40kHz

  • Pulse Repetition Rate :

    10-200kHz

  • Spatial Mode:

    TEM00

  • Beam Quality (㎡) :

    <1.2

  • Beam Diameter:

    0.8±0.1mm Measured at window

  • Beam Full Divergence Angle :

    <2mrad

  • Beam Circularity:

    >90%

  • Pulse-To-Pulse Stability:

    <3% RMS/@30kHz

  • Average Power Stability :

    <5% RMS/8hr

  • Beam-Pointing Drift:

    <25μrad/℃

  • Polarization Ratio:

    >100:1

  • Polarization Orientation:

    Horizontal

  • Operating Temp. & RH:

    10℃ to 35℃ | <80%

  • Storage Temp. & RH:

    10℃ to 35℃ | <90 %

  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase

  • Power Consumption:

    <800W

  • Warranty :

    18months
Inquire now
banner
  • Product Detail
  • Video

uv laser

Exquisite ceramic engraving and drilling can not be separated from UV laser

 

Website: http://www.rfhtech.com

Whatsapp(Wechat): 18928466502

Email: export06@rfhlasertech.com

 

Anti-counterfeiting! 355nm UV laser marking carbon fiber badminton racket

Badminton is a very popular sport in China. As more people pay attention to badminton, the number of participants in this sport is also increasing, and the production of badminton rackets, especially carbon fiber badminton rackets, is also increasing.

 

The manufacturer of carbon fiber badminton rackets, Mr. Zhao from Hengyang came to Ruifengheng recently, hoping to find a suitable technology for the marking process on badminton rackets, and hope that this process can be marked with anti-counterfeiting effect. So, the sales staff of Ruifengheng recommended a 355nm UV laser for him.

Breaking through the barriers of traditional ink coding, UV laser marking carbon fiber

Unlike traditional ink jet printers, UV lasers do not require other consumables and are not easy to tamper with. Once marked, they will never be erased. In addition, the characters and patterns produced by Ruifengheng UV laser marking have unique effects, which are distinctive in both fonts and effects, and can be used as special anti-counterfeiting signs to avoid imitation of pirated goods.

Anti-piracy, high-power ultraviolet laser cuts off the idea of ​​counterfeit merchants

In addition, the Ruifeng Heng UV laser can produce continuously for 24 hours. Due to the small heat-affected zone, there will be no thermal effect, and the problem of material scorching will not expand, and the processing quality is far superior to other laser technologies. Although the initial cost is higher than the traditional ink jet coding technology, in terms of later investment and environmental protection design, Ruifengheng UV laser greatly reduces various risks and is the best choice for Mr. Zhao.

 

After listening to the introduction, Mr. Zhao decided to choose Ruifengheng UV laser, and after using it, he praised the excellent performance of the ultraviolet laser, which made Ruifengheng enter a new field again.

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
K-6 Integrated UV Laser 4W-6W
K-6 Integrated UV Laser 4W-6W-8W
K-6 series UV DPSS laser, developed and produced by RFH, covers 4W/6W/8W in laser power with short pulse width (<20ns@30K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). K-6 series laser is ideal for high-end ultra-precise processing as well as marking in mobile phone shell , package of cosmetics, food, medicine and other high polymer materials, PCB, LCD, glassware surface, metal’s cladding material, plastic keypad, electronic component, gift, communication device, construction material and other areas.
Download datasheet
K-6 Integrated UV Laser 4W-6W
Learn More
Why RFH UV laser is often used in laser marking plastic button switch?
Why RFH UV laser is often used in laser marking plastic button switch
Why RFH UV laser is often used in laser marking plastic button switch? More and more manufacturers choose UV laser marking machine to create pattern and characters on the plastic button switch. The focal spot of UV laser is pretty small with little heat transfer to surrounding material, so UV laser is also called “cold light source”. Because of this feature, heat effect won’t occur. Thus, distorting or burning of materials is no longer an issue.    Professional UV laser manufacturer - Shenzhen RFH Laser Technology Co.,Ltd    With 13 years of experience, the S9 series nanosecond UV laser developed and produced by RFH can engrave clear characters on the keyboard and the mouse. These kinds of characters can not only help people identify different buttons in the dark but also last long, for there are slightly protruding part on the buttons. This improves the durability and practicability of the keyboard and the mouse.   
Why RFH UV laser is often used in laser marking plastic button switch?
Learn More
UV laser
UV laser featuring cold processing for marking plastic button on keyboard
 UV laser featuring cold processing for marking plastic button on keyboard More and more manufacturers choose UV laser marking machine to create pattern and characters on the plastic button switch. The focal spot of UV laser is pretty small with little heat transfer to surrounding material, so UV laser is also called “cold light source”. Because of this feature, heat effect won’t occur. Thus, distorting or burning of materials is no longer an issue.    Professional UV laser manufacturer - Shenzhen RFH Laser Technology Co.,Ltd    With 13 years of experience, the S9 series nanosecond UV laser developed and produced by RFH can engrave clear characters on the keyboard and the mouse. These kinds of characters can not only help people identify different buttons in the dark but also last long, for there are slightly protruding part on the buttons. This improves the durability and practicability of the keyboard and the mouse.   
UV laser
Learn More
green laser takes 0.2 seconds to mark the QR code of PCB circuit board
green laser takes 0.2 seconds to mark the QR code of PCB circuit board
RFH 532nm green laser matching 20W green laser marking machine It only takes 0.2 seconds to mark the QR code of PCB circuit board with 532nm green laser  532nm green laser has superior beam quality   Have you formulated your laser processing production plan for the new year? Do you plan to purchase or update your laser processing equipment? Today, the editor of RFH Laser recommends a green laser—RFH Excellent Ⅱ 532nm green laser (18W-35 W) to new friends in the industry. In the new year, it will be stable and dominate the laser marking market, it can help.  
green laser takes 0.2 seconds to mark the QR code of PCB circuit board
Learn More
532nm green laser matching 20W green laser marking machine
532nm green laser matching 20W green laser marking machine
RFH 532nm green laser matching 20W green laser marking machine It only takes 0.2 seconds to mark the QR code of PCB circuit board with 532nm green laser  532nm green laser has superior beam quality   Have you formulated your laser processing production plan for the new year? Do you plan to purchase or update your laser processing equipment? Today, the editor of RFH Laser recommends a green laser—RFH Excellent Ⅱ 532nm green laser (18W-35 W) to new friends in the industry. In the new year, it will be stable and dominate the laser marking market, it can help.  
532nm green laser matching 20W green laser marking machine
Learn More
532nm green laser has superior beam quality
532nm green laser has superior beam quality
RFH 532nm green laser matching 20W green laser marking machine It only takes 0.2 seconds to mark the QR code of PCB circuit board with 532nm green laser  532nm green laser has superior beam quality   Have you formulated your laser processing production plan for the new year? Do you plan to purchase or update your laser processing equipment? Today, the editor of RFH Laser recommends a green laser—RFH Excellent Ⅱ 532nm green laser (18W-35 W) to new friends in the industry. In the new year, it will be stable and dominate the laser marking market, it can help.  
532nm green laser has superior beam quality
Learn More
3W UV laser marking machine comes standard with RFH 355nm UV laser
3W UV laser marking machine comes standard with RFH 355nm UV laser
3W UV laser marking machine comes standard with RFH 355nm UV laser 355nm UV laser has longer life and higher accuracy Ultraviolet laser is the best choice for laser marking machine manufacturers   Recently, some pharmaceutical packaging manufacturers have consulted the RFH Laser Editor and asked if we can recommend some more stable 3W UV laser marking machine brands. Now the laser marking machine in the factory will be intermittent when working. Well, we have many customers, this is not recommended, but we can give you a plan to help you effectively screen for UV laser processing equipment that can work stably.
3W UV laser marking machine comes standard with RFH 355nm UV laser
Learn More
355nm UV laser has longer life and higher accuracy
355nm UV laser has longer life and higher accuracy
3W UV laser marking machine comes standard with RFH 355nm UV laser 355nm UV laser has longer life and higher accuracy Ultraviolet laser is the best choice for laser marking machine manufacturers   Recently, some pharmaceutical packaging manufacturers have consulted the RFH Laser Editor and asked if we can recommend some more stable 3W UV laser marking machine brands. Now the laser marking machine in the factory will be intermittent when working. Well, we have many customers, this is not recommended, but we can give you a plan to help you effectively screen for UV laser processing equipment that can work stably.
355nm UV laser has longer life and higher accuracy
Learn More
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

As the leading industrial solid-state laser manufacturer, RFH laser company offer 355nm ultraviolet laser, 532nm green laser and customized laser for a broad range of commercial, industrial, and scientific applications.
Contacts
Copyright © 2026  The leading solid state laser manufacturer All Rights Reserved.
Sitemap | XML | IPv6 network supported
Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact