10W-15W uv laser

3W5W UV laser marking KN95 mask date and information

RFH UV laser is used for KN95 mask marking, less than one second

3W5W UV laser marking KN95 mask date and information

355mm UV cold light source, will not damage the mask

 

With the spread of the epidemic around the world, people's demand for masks continues to increase, and major mask manufacturers are also working hard to increase the production of masks. Among them, mask marking is an indispensable and important part of the production process. The printing mark of KN95 masks is generally printed on the outside of the mask. The content on it generally includes the mask model, related certificates, production date, etc., which is an important means of inspecting the quality and quality of the mask.

  • Laser Wavelength:

    354.7nm
  • Average Output Power :

    4W/6W/8W @30kHz
  • Pulse Width:

    <20ns @ 30kHz
  • Pulse Repetition Rate :

    10-200kHz
  • Spatial Mode:

    TEM00
  • Beam Quality (㎡) :

    <1.2
  • Beam Diameter:

    0.8±0.1mm Measured at window
  • Beam Full Divergence Angle :

    <1.2mrad
  • Beam Circularity:

    >90%
  • Pulse-To-Pulse Stability:

    <3% RMS/@30kHz
  • Average Power Stability :

    <5% RMS/8hr
  • Beam-Pointing Drift:

    <25μrad/℃
  • Polarization Ratio:

    >100:1
  • Polarization Orientation:

    Horizontal
  • Operating Temp. & RH:

    10℃ to 35℃ | <90%
  • Storage Temp. & RH:

    -20℃ to 65℃ | <90 %
  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase
  • Power Consumption:

    <500W
  • Warranty :

    18months
  • Product Detail
  • Video

RFH UV laser is used for KN95 mask marking, less than one second

3W5W UV laser marking KN95 mask date and information

355mm UV cold light source, will not damage the mask

 

With the spread of the epidemic around the world, people's demand for masks continues to increase, and major mask manufacturers are also working hard to increase the production of masks. Among them, mask marking is an indispensable and important part of the production process. The printing mark of KN95 masks is generally printed on the outside of the mask. The content on it generally includes the mask model, related certificates, production date, etc., which is an important means of inspecting the quality and quality of the mask.

 

Consumers rely on marking to identify the authenticity of masks, and overseas countries rely on marking to identify whether masks comply with local medical regulations. Since marking is so important, how to choose the mask production process and supporting equipment?

 

Inkjet marking VS laser marking

 

At present, the common marking processes on the market include inkjet marking and laser marking. For medical supplies such as masks, UV laser marking should be preferred. Why is UV laser marking?

 

It should be known that the material of meltblown cloth used in masks has a thin surface and is not easy to process in a hot environment. Some laser light sources will generate high temperatures during processing, and UV laser marking can be very well adapted. The release of 355mm Ultraviolet cold light source will not produce high temperature during marking and will not cause damage to the mask. This type of light source has a small focus spot and is very suitable for marking delicate and tiny materials, so that the marking effect is not only clear and eye-catching. , It will not appear scattered ink and burrs, it can be said that it has many advantages in marking.

 

Ultraviolet laser marking can meet the needs of marking the LOGO, production date, breathing valve, and packaging bags of masks such as N95 and KN95. It can improve production efficiency and has excellent results. Among them, it is particularly important to choose ultraviolet solid-state lasers in industrial applications.

 

How to choose high-quality solid-state lasers?

 

A good UV solid-state laser should have the following advantages:

 

One, high precision. Ultraviolet lasers are often used for micromachining, and higher precision can ensure the accuracy and integrity of marking.

 

Second, it is convenient to install and maintain. Many lasers are cumbersome to install, and corporate purchases often take a lot of time to debug and install, which greatly occupies the development and maintenance costs of the enterprise. The excellent laser circuit design is simple, easy to install, and uses CNC control, which makes it easy to get started.

 

Third, the stability is high. A good ultraviolet laser usually has a wavelength below 0.4μm, a stable beam, and a balanced energy control. It can effectively micro-process the polymer material without showing signs of burn damage to the material.

 

KN95 mask laser marking is completed in 1 second

 

Combining the above characteristics, RFH UV laser is an ideal choice.

 

RFH Expert Ⅱ 355nm UV laser has a laser wavelength of 354.7nm and a wide range of repetition frequency (single pulse to 200kHz), which can be better absorbed by the material and is less destructive to the material. At the same time, it has superior beam quality (M2<1.2), which is strictly guaranteed in all frequency ranges; pulse width <20ns@30k, the heat-affected area during processing is small, and it supports digital intelligent power control, simple operation, low hands-on cost, Suitable for various laser application control needs.

  

RFH Expert Ⅱ 355nm UV laser has many advantages in mask marking applications:

 

Sterile and environmentally friendly, 0 pollution

The identification code never falls off

The handwriting is clear and legible

Facilitate anti-counterfeiting and full traceability of mask products

Complete in 1 second, convenient and efficient

  

At present, many large-scale mask industry chains have used RFH UV lasers for mask marking and anti-counterfeiting. The trust of customers is RFH's eternal pursuit. As the epidemic intensifies overseas, RFH laser will invest more technology to help mask quality.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
3W UV laser marking machine comes standard with RFH 355nm UV laser
3W UV laser marking machine comes standard with RFH 355nm UV laser
3W UV laser marking machine comes standard with RFH 355nm UV laser 355nm UV laser has longer life and higher accuracy Ultraviolet laser is the best choice for laser marking machine manufacturers   Recently, some pharmaceutical packaging manufacturers have consulted the RFH Laser Editor and asked if we can recommend some more stable 3W UV laser marking machine brands. Now the laser marking machine in the factory will be intermittent when working. Well, we have many customers, this is not recommended, but we can give you a plan to help you effectively screen for UV laser processing equipment that can work stably.
3W UV laser marking machine comes standard with RFH 355nm UV laser
355nm UV laser has longer life and higher accuracy
355nm UV laser has longer life and higher accuracy
3W UV laser marking machine comes standard with RFH 355nm UV laser 355nm UV laser has longer life and higher accuracy Ultraviolet laser is the best choice for laser marking machine manufacturers   Recently, some pharmaceutical packaging manufacturers have consulted the RFH Laser Editor and asked if we can recommend some more stable 3W UV laser marking machine brands. Now the laser marking machine in the factory will be intermittent when working. Well, we have many customers, this is not recommended, but we can give you a plan to help you effectively screen for UV laser processing equipment that can work stably.
355nm UV laser has longer life and higher accuracy
Ultraviolet laser is the best choice for laser marking machine manufacturers
Ultraviolet laser is the best choice for laser marking machine manufacturers
3W UV laser marking machine comes standard with RFH 355nm UV laser 355nm UV laser has longer life and higher accuracy Ultraviolet laser is the best choice for laser marking machine manufacturers   Recently, some pharmaceutical packaging manufacturers have consulted the RFH Laser Editor and asked if we can recommend some more stable 3W UV laser marking machine brands. Now the laser marking machine in the factory will be intermittent when working. Well, we have many customers, this is not recommended, but we can give you a plan to help you effectively screen for UV laser processing equipment that can work stably.
Ultraviolet laser is the best choice for laser marking machine manufacturers
Is fiber laser or UV laser better for laser marking machine?
Is fiber laser or UV laser better for laser marking machine?
Is fiber laser or UV laser better for laser marking machine? UV laser has an unshakable position in the plastic marking industry Ultraviolet laser has a small focus spot, low thermal influence and high speed   Today, let’s discuss together: Is it better to use optical fiber for laser marking machine or UV?   Fiber laser marking machine and ultraviolet laser marking machine are different types of laser processing equipment, and their core components, processing principles and application fields are quite different. Below, let's make a specific comparison:  
Is fiber laser or UV laser better for laser marking machine?
UV laser has an unshakable position in the plastic marking industry
UV laser has an unshakable position in the plastic marking industry
Is fiber laser or UV laser better for laser marking machine? UV laser has an unshakable position in the plastic marking industry Ultraviolet laser has a small focus spot, low thermal influence and high speed   Today, let’s discuss together: Is it better to use optical fiber for laser marking machine or UV?   Fiber laser marking machine and ultraviolet laser marking machine are different types of laser processing equipment, and their core components, processing principles and application fields are quite different. Below, let's make a specific comparison:  
UV laser has an unshakable position in the plastic marking industry
Ultraviolet laser has a small focus spot, low thermal influence and high speed
Ultraviolet laser has a small focus spot, low thermal influence and high speed
Is fiber laser or UV laser better for laser marking machine? UV laser has an unshakable position in the plastic marking industry Ultraviolet laser has a small focus spot, low thermal influence and high speed   Today, let’s discuss together: Is it better to use optical fiber for laser marking machine or UV?   Fiber laser marking machine and ultraviolet laser marking machine are different types of laser processing equipment, and their core components, processing principles and application fields are quite different. Below, let's make a specific comparison:  
Ultraviolet laser has a small focus spot, low thermal influence and high speed
RFH 355 UV laser is used in food packaging laser marking machine
RFH 355 UV laser is used in food packaging laser marking machine
RFH 355 UV laser is used in food packaging laser marking machine In the laser marking processing industry, laser equipment is the most important production tool, and the stability of laser equipment affects the efficiency of the entire factory. The laser is the core part of laser equipment. Therefore, laser equipment manufacturers pay special attention to the quality of their products when purchasing lasers.   So, what about the quality of the laser? Today, RFH Laser Editor recommends a method to everyone: from the manufacturer's production process, especially the inspection process.
RFH 355 UV laser is used in food packaging laser marking machine
Ultraviolet laser has low thermal influence and high precision
Ultraviolet laser has low thermal influence and high precision
Ultraviolet laser has low thermal influence and high precision In the laser marking processing industry, laser equipment is the most important production tool, and the stability of laser equipment affects the efficiency of the entire factory. The laser is the core part of laser equipment. Therefore, laser equipment manufacturers pay special attention to the quality of their products when purchasing lasers.   So, what about the quality of the laser? Today, RFH Laser Editor recommends a method to everyone: from the manufacturer's production process, especially the inspection process.
Ultraviolet laser has low thermal influence and high precision
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact