RFH 35W green laser marking refrigerator LCD glass display surface and LOGO
Glass and LCD screens are extremely fragile and fragile materials, and we need to be careful when using them, let alone marking and engraving on these materials. Therefore, if manufacturers of these products want to mark or engrave these materials, they must use laser means to complete.
However, the R&D teams and technical levels of laser manufacturers also vary. If the technology of laser marking products is not strong enough, it may not only result in poor marking effect of the products produced by the customer's factory, lower the overall grade of the product, but also increase the loss of materials. rate, thereby increasing the cost of the customer's factory. Therefore, choosing a laser marking supplier with excellent laser technology and good after-sales service to cooperate is the common pursuit of every manufacturer producing the same type of products.
RFH is such an industrial-grade laser manufacturer that has been cultivating laser technology for fifteen years. The 35W green laser it produces can easily complete the processing work on the surface of most materials such as glass, thin film, and metal.
The 532 nm green laser has a wide repetition rate coverage (10kHz to 200kHz); it has excellent beam quality (M²<1.2), which is strictly guaranteed in all frequency ranges; the pulse width is <25ns@50k, and the heat-affected area is very small during processing ;Unique Q-switching control technology, suitable for various laser application control requirements; Adopt full digital intelligent power control technology, easy to operate, convenient to monitor, also supports communication with computer, and can control the laser externally through RS232.
It is worth mentioning that RFH Laser has a laser research and development team, which is an industrial-level research and development team composed of domestic and foreign professors, experts, and doctors. In addition to talents, RFH has set up application process research and development departments, laser research and development departments, electrical research and development departments, etc. The department is dedicated to the service and after-sales of lasers developed for it.
On Monday, a customer from Shandong placed an order to buy 5 sets of 35W green lasers, which are mainly used for marking refrigerator LCD screen information and LOGO. Thank you for your trust.
