10W-15W uv laser

RFH 532 Green Laser Pulse Width Cold Processing Wine Bottle Marking

RFH 532 Green Laser Pulse Width Cold Processing Wine Bottle Marking

The refined quality of RFH green lasers is actually a team of professors at home and abroad.

532 green laser for glass wine bottle, it is really the best gift

 

Yesterday, I received a message from Italian customer Cary. She said that after participating in the Shanghai International Import Expo, she would fly to Shenzhen to visit the company. I'm worried about what kind of meeting ceremony I should prepare. Wine is an important part of Italian culture. Therefore, I decided to put the RFH LOGO on the wine bottles presented as a sign of my heart.

  • Laser Wavelength:

    532nm
  • Average Output Power :

    35W @50kHz
  • Pulse Width:

    <25ns @50kHz
  • Pulse Repetition Rate :

    10-200kHz
  • Spatial Mode:

    TEM00
  • Beam Quality (㎡) :

    <1.2
  • Beam Diameter:

    1.0±0.2mm Measured at window
  • Beam Full Divergence Angle :

    <1.2mrad
  • Beam Circularity:

    >90%
  • Pulse-To-Pulse Stability:

    <2% RMS/@30kHz
  • Average Power Stability :

    <3% RMS/8hr
  • Beam-Pointing Drift:

    <30μrad/℃
  • Polarization Ratio:

    >100:1
  • Polarization Orientation:

    Horizontal
  • Operating Temp. & RH:

    10℃ to 35℃ | <80%
  • Storage Temp. & RH:

    -20℃ to 65℃ | <90 %
  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase
  • Power Consumption:

    <5000W
  • Warranty :

    18months
  • Product Detail
  • Video

uv laser

RFH 532 Green Laser Pulse Width Cold Processing Wine Bottle Marking

The refined quality of RFH green lasers is actually a team of professors at home and abroad.

532 green laser for glass wine bottle, it is really the best gift

 

Yesterday, I received a message from Italian customer Cary. She said that after participating in the Shanghai International Import Expo, she would fly to Shenzhen to visit the company. I'm worried about what kind of meeting ceremony I should prepare. Wine is an important part of Italian culture. Therefore, I decided to put the RFH LOGO on the wine bottles presented as a sign of my heart.

Marking on glass bottles requires the use of the Expert II 532 green laser carefully crafted by RFH for 13 years. The pulse width of the green laser is <35ns@30k, the focusing spot is very small, the processing heat-affected zone is small, and there is almost no damage caused by the heat, so it is called a cold light source. Because of the extremely small heat-affected area of ​​the UV laser, there is no thermal effect, and the deformation or scorching of the processed material is avoided. Expert II 532 green laser has a wide range of repetition frequency (single pulse to 200kHz), so it can be suitable for pipeline marking; in addition, the green laser strictly guarantees superior beam quality in all frequency ranges (M²<1.3) And perfect spot characteristics (the spot ellipticity is greater than 90%); unique Q-switching control technology, which can be suitable for various laser application control needs; all-digital intelligent power control technology, simple operation and convenient monitoring; support for computer communication, via RS232 External control laser; Integrated design to facilitate equipment integration.

The refinement of quality is actually backed by a group of domestic and foreign professors and doctoral-level R&D teams. 13 years of development and precipitation, the production of all RFH green laser products strictly implements the "Quality Management System" regulations.

From procurement-pre-production quality inspection control-rigorous assembly process-finished product testing-warehousing quality inspection-pre-delivery inspection-after-sales service, each level is checked to ensure stable quality and consistency of equipment parameters with actual operating parameters. This is the reason why the service life of RFH brand lasers is better than that of peers

Green lasers are produced in a dust-free workshop

The clean production environment ensures that all electronic components are produced dust-free and free from pollution.

Also, the power control system for green lasers is also developed automatically.

There is a one-to-one correspondence between the power supply and the laser. The stability of the power supply control system determines whether the laser can maximize its performance during operation. RFH has the advantages of independent research and development of power supply technology, which can update the function modules of the power control system in time and improve the function modules according to the needs of the laser.

Established applied process research and development department, laser research and development department, electrical research and development department, 10 national patent certificates, 14 computer software copyright certificates, and won the "High-tech Enterprise", "Shenzhen High-tech Enterprise", "Software Enterprise Certification Certificate", etc. Certificate, and was appointed as the governing unit by Guangdong 3D Printing Industry Innovation Alliance and Guangdong Laser Industry Association.

In the 13 years of Jinggong, RFH has established an excellent brand image in plastics, glass, circuit boards, ceramics and other major fields with the advantages of high quality, high stability, and cost-effective products in the fierce market competition. RFH has also expanded the company's scale and established a solid backup force such as the application process research and development department, the laser research and development department, and the electrical research and development department. At the same time, it has also obtained 10 national patent certificates, 14 computer software copyright certificates, "high-tech enterprises", "Shenzhen" City high-tech enterprise", "software enterprise recognition certificate" and other certificates, and were appointed as the governing units by the Guangdong 3D Printing Industry Innovation Alliance and the Guangdong Laser Industry Association.

In the next 13 years, RFH looks forward to having you with you!

 

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
532 green laser is used to laser mark on ceramic knife
532 green laser is used to laser mark on ceramic knife
532 green laser is used to laser mark on ceramic knife Using RFH 532nm green laser to laser mark on ceramic knife enables the pattern on it to be very clear and doesn’t affect its normal cutting performance. This maximizes the brand quality and the delicacy of the ceramic knife.   Today, RFH is going to share the case of a ceramic knife supplier whose peer recommends RFH 10W 532nm green laser to him.    As we all know, marking on a ceramic knife adopts a laser marking technique. The whole marking process on the ceramic knife is so simple and generally takes a few seconds to finish. But this seemingly “simple” process needs to be supported by a well-established technique.And that is a laser system with exceptional laser beam quality and its accessories. An excellent laser is the basis of 99% yield of laser marking product and the solid-state green laser produced by RFH with 13-year experience is the perfect example.   
532 green laser is used to laser mark on ceramic knife
RFH green laser is recommended by a peer of a ceramic knife supplier
RFH green laser is recommended by a peer of a ceramic knife supplier
With brand strength, RFH green laser is recommended by a peer of a ceramic knife supplier Using RFH 532nm green laser to laser mark on ceramic knife enables the pattern on it to be very clear and doesn’t affect its normal cutting performance. This maximizes the brand quality and the delicacy of the ceramic knife.   Today, RFH is going to share the case of a ceramic knife supplier whose peer recommends RFH 10W 532nm green laser to him.    As we all know, marking on a ceramic knife adopts a laser marking technique. The whole marking process on the ceramic knife is so simple and generally takes a few seconds to finish. But this seemingly “simple” process needs to be supported by a well-established technique.And that is a laser system with exceptional laser beam quality and its accessories. An excellent laser is the basis of 99% yield of laser marking product and the solid-state green laser produced by RFH with 13-year experience is the perfect example.   
RFH green laser is recommended by a peer of a ceramic knife supplier
RFH 532nm green laser marking glass with ±0.02mm High precision
RFH 532nm green laser marking glass with ±0.02mm High precision
RFH 532nm green laser marking glass with ±0.02mm High precision 532nm green laser is a great accomplishment of RFH which has 13 years of R&D experience. It has perfect beam spot quality(Beam Circularity>90%) , relatively short pulse width <35ns@30K with little heat transfer to surrounding material and exceptional beam quality (M²<1.3) absolutely assured in all repetition rates. These features of 532nm green laser guarantee fast marking speed and delicate marking performance.  In addition, RFH 532nm green laser has independent R&D in power supply technique,which enables timely update and improvement of power supply control system module based on the laser’s need. The unique Q-switching technology makes it applicable to a variety of control requirements of laser applications. Online refreshment for harmonic coupling technology ensures its long life time. Therefore, RFH 532nm green laser is very ideal to be integrated into UV laser glass marking machine.
RFH 532nm green laser marking glass with ±0.02mm High precision
Two more green lasers are ordered by a Singapore glassware laser marker
Two more green lasers are ordered by a Singapore glassware laser marker
Two more green lasers are ordered by a Singapore glassware laser marker 532nm green laser is a great accomplishment of RFH which has 13 years of R&D experience. It has perfect beam spot quality(Beam Circularity>90%) , relatively short pulse width <35ns@30K with little heat transfer to surrounding material and exceptional beam quality (M²<1.3) absolutely assured in all repetition rates. These features of 532nm green laser guarantee fast marking speed and delicate marking performance.  In addition, RFH 532nm green laser has independent R&D in power supply technique,which enables timely update and improvement of power supply control system module based on the laser’s need. The unique Q-switching technology makes it applicable to a variety of control requirements of laser applications. Online refreshment for harmonic coupling technology ensures its long life time. Therefore, RFH 532nm green laser is very ideal to be integrated into UV laser glass marking machine.
Two more green lasers are ordered by a Singapore glassware laser marker
532nm green laser engraving glass of car
532nm green laser engraving glass of car
532nm green laser engraving glass of car Using RFH 532nm green laser to mark LOGO on automobile windscreen can make sure the logo to be accurate, high-definition and long-lasting after long time driving.   High precision of ±0.002mm, high stability and high cost performance are the core advantages of RFH green laser.   RFH green laser features 532nm laser wavelength. It is this small laser wavelength that decides the excellent beam quality and small focal spot of the green laser. Therefore, it can perfectly meet the needs of ultra-precise marking of automobile windscreen with the minimum character being 0.02mm.  
532nm green laser engraving glass of car
RFH 532nm green laser is used to mark Logo on windscreen of luxurious automobile
RFH 532nm green laser is used to mark Logo on windscreen of luxurious automobile
RFH 532nm green laser is used to mark Logo on windscreen of luxurious automobile Using RFH 532nm green laser to mark LOGO on automobile windscreen can make sure the logo to be accurate, high-definition and long-lasting after long time driving.   High precision of ±0.002mm, high stability and high cost performance are the core advantages of RFH green laser.   RFH green laser features 532nm laser wavelength. It is this small laser wavelength that decides the excellent beam quality and small focal spot of the green laser. Therefore, it can perfectly meet the needs of ultra-precise marking of automobile windscreen with the minimum character being 0.02mm.  
RFH 532nm green laser is used to mark Logo on windscreen of luxurious automobile
RFH 35W green laser marking-glass logo, So Easy
RFH 35W green laser marking-glass logo, So Easy
RFH 35W green laser marking-glass logo, So Easy   South Korean customer Fach produces glass wine cups. Before, the factory also used a brand of green laser, but there were always some wine cups with little defects which were overheated during processing, causing the wine cups to scorch or even deform.   Introduced by a friend, Fach has learned that the RFH Expert III 532 green laser is very effective for marking glass. So he has ordered one from us and tested the effect. After using our laser, Fach said that the heat affected area of the laser during processing is very small, which is very suitable for their laser application, and there will be no scorching or deformation.    At the beginning of the month, I received a call from Fach again. Because of his expansion of the production line, he needed to order 5 green lasers again.  
RFH 35W green laser marking-glass logo, So Easy
RFH 532nm green laser marking glass without deformation
RFH 532nm green laser marking glass without deformation
RFH 532nm green laser marking glass without deformation   South Korean customer Fach produces glass wine cups. Before, the factory also used a brand of green laser, but there were always some wine cups with little defects which were overheated during processing, causing the wine cups to scorch or even deform.   Introduced by a friend, Fach has learned that the RFH Expert III 532 green laser is very effective for marking glass. So he has ordered one from us and tested the effect. After using our laser, Fach said that the heat affected area of the laser during processing is very small, which is very suitable for their laser application, and there will be no scorching or deformation.    At the beginning of the month, I received a call from Fach again. Because of his expansion of the production line, he needed to order 5 green lasers again.  
RFH 532nm green laser marking glass without deformation
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

leave a message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact