10W-15W uv laser

RFH 355nm UV laser has fast speed and fine marking

RFH 355nm UV laser has fast speed and fine marking

In the laser marking processing industry, laser equipment is the most important production tool, and the stability of laser equipment affects the efficiency of the entire factory. The laser is the core part of laser equipment. Therefore, laser equipment manufacturers pay special attention to the quality of their products when purchasing lasers.

 

So, what about the quality of the laser? Today, RFH Laser Editor recommends a method to everyone: from the manufacturer's production process, especially the inspection process.

  • Laser Wavelength:

    354.7nm
  • Average Output Power :

    10W/12W/15W @40kHz
  • Pulse Width:

    <20ns @40kHz
  • Pulse Repetition Rate :

    10-200kHz
  • Spatial Mode:

    TEM00
  • Beam Quality (㎡) :

    <1.2
  • Beam Diameter:

    0.8±0.1mm Measured at window
  • Beam Full Divergence Angle :

    <2mrad
  • Beam Circularity:

    >90%
  • Pulse-To-Pulse Stability:

    <3% RMS/@30kHz
  • Average Power Stability :

    <5% RMS/8hr
  • Beam-Pointing Drift:

    <25μrad/℃
  • Polarization Ratio:

    >100:1
  • Polarization Orientation:

    Horizontal
  • Operating Temp. & RH:

    10℃ to 35℃ | <80%
  • Storage Temp. & RH:

    10℃ to 35℃ | <90 %
  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase
  • Power Consumption:

    <800W
  • Warranty :

    18months
  • Product Detail
  • Video

RFH 355nm UV laser has fast speed and fine marking

In the laser marking processing industry, laser equipment is the most important production tool, and the stability of laser equipment affects the efficiency of the entire factory. The laser is the core part of laser equipment. Therefore, laser equipment manufacturers pay special attention to the quality of their products when purchasing lasers.

 

So, what about the quality of the laser? Today, RFH Laser Editor recommends a method to everyone: from the manufacturer's production process, especially the inspection process.

 

A high-quality laser must be able to withstand multiple tests, otherwise it will fail during long-term continuous operation when used in actual production and processing.

 

Next, let's take a look at the high-quality 355nm UV lasers of RFH that go through several inspections before shipment.

 

Pre-production quality inspection and control: each component is tested to ensure that the components are 100% qualified before it can enter the production material reserve; early-stage wiring-testing and sealing-debugging, layered checks, quality assurance; finished product testing: all products pass Strict aging test, product parameters such as power, beam quality, spot ellipticity, beam pointing stability, etc. must be 100% up to the standard; warehousing quality inspection: strictly in accordance with the "product warehousing inspection standards", the machine parameters and accessories conform to 100% Only allow storage; pre-delivery inspection: turn on again to test the equipment power, spot ellipticity, beam direction, and other parameters, and the accuracy rate is 100% before delivery.

 

It is this multiple detection that allows the RFH 355nm UV laser to maintain constant beam quality and high-efficiency power consumption under extreme industrial and scientific research conditions, and conquer many domestic and foreign laser equipment manufacturers with its superior quality of fast speed and fine effects , Is used to manufacture a variety of high-precision laser marking equipment such as food packaging laser marking machine and pharmaceutical packaging laser marking machine.

 

Of course, it also depends on what technology the laser has.

 

RFH 355nm UV laser has self-developed all-digital intelligent power control technology, which can update the power control system function modules in time, and improve the function modules according to laser needs to ensure the stable operation of the entire laser system; it has unique Q-switching control technology, suitable for all This kind of laser application control needs; has an internal cavity self-purification system, which makes the laser long life and stable operation.

 

This first-class quality UV laser is the result of 12 years of RFH cultivation.

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
3W UV laser marking machine comes standard with RFH 355nm UV laser
3W UV laser marking machine comes standard with RFH 355nm UV laser
3W UV laser marking machine comes standard with RFH 355nm UV laser 355nm UV laser has longer life and higher accuracy Ultraviolet laser is the best choice for laser marking machine manufacturers   Recently, some pharmaceutical packaging manufacturers have consulted the RFH Laser Editor and asked if we can recommend some more stable 3W UV laser marking machine brands. Now the laser marking machine in the factory will be intermittent when working. Well, we have many customers, this is not recommended, but we can give you a plan to help you effectively screen for UV laser processing equipment that can work stably.
3W UV laser marking machine comes standard with RFH 355nm UV laser
355nm UV laser has longer life and higher accuracy
355nm UV laser has longer life and higher accuracy
3W UV laser marking machine comes standard with RFH 355nm UV laser 355nm UV laser has longer life and higher accuracy Ultraviolet laser is the best choice for laser marking machine manufacturers   Recently, some pharmaceutical packaging manufacturers have consulted the RFH Laser Editor and asked if we can recommend some more stable 3W UV laser marking machine brands. Now the laser marking machine in the factory will be intermittent when working. Well, we have many customers, this is not recommended, but we can give you a plan to help you effectively screen for UV laser processing equipment that can work stably.
355nm UV laser has longer life and higher accuracy
Ultraviolet laser is the best choice for laser marking machine manufacturers
Ultraviolet laser is the best choice for laser marking machine manufacturers
3W UV laser marking machine comes standard with RFH 355nm UV laser 355nm UV laser has longer life and higher accuracy Ultraviolet laser is the best choice for laser marking machine manufacturers   Recently, some pharmaceutical packaging manufacturers have consulted the RFH Laser Editor and asked if we can recommend some more stable 3W UV laser marking machine brands. Now the laser marking machine in the factory will be intermittent when working. Well, we have many customers, this is not recommended, but we can give you a plan to help you effectively screen for UV laser processing equipment that can work stably.
Ultraviolet laser is the best choice for laser marking machine manufacturers
Is fiber laser or UV laser better for laser marking machine?
Is fiber laser or UV laser better for laser marking machine?
Is fiber laser or UV laser better for laser marking machine? UV laser has an unshakable position in the plastic marking industry Ultraviolet laser has a small focus spot, low thermal influence and high speed   Today, let’s discuss together: Is it better to use optical fiber for laser marking machine or UV?   Fiber laser marking machine and ultraviolet laser marking machine are different types of laser processing equipment, and their core components, processing principles and application fields are quite different. Below, let's make a specific comparison:  
Is fiber laser or UV laser better for laser marking machine?
UV laser has an unshakable position in the plastic marking industry
UV laser has an unshakable position in the plastic marking industry
Is fiber laser or UV laser better for laser marking machine? UV laser has an unshakable position in the plastic marking industry Ultraviolet laser has a small focus spot, low thermal influence and high speed   Today, let’s discuss together: Is it better to use optical fiber for laser marking machine or UV?   Fiber laser marking machine and ultraviolet laser marking machine are different types of laser processing equipment, and their core components, processing principles and application fields are quite different. Below, let's make a specific comparison:  
UV laser has an unshakable position in the plastic marking industry
Ultraviolet laser has a small focus spot, low thermal influence and high speed
Ultraviolet laser has a small focus spot, low thermal influence and high speed
Is fiber laser or UV laser better for laser marking machine? UV laser has an unshakable position in the plastic marking industry Ultraviolet laser has a small focus spot, low thermal influence and high speed   Today, let’s discuss together: Is it better to use optical fiber for laser marking machine or UV?   Fiber laser marking machine and ultraviolet laser marking machine are different types of laser processing equipment, and their core components, processing principles and application fields are quite different. Below, let's make a specific comparison:  
Ultraviolet laser has a small focus spot, low thermal influence and high speed
RFH 355 UV laser is used in food packaging laser marking machine
RFH 355 UV laser is used in food packaging laser marking machine
RFH 355 UV laser is used in food packaging laser marking machine In the laser marking processing industry, laser equipment is the most important production tool, and the stability of laser equipment affects the efficiency of the entire factory. The laser is the core part of laser equipment. Therefore, laser equipment manufacturers pay special attention to the quality of their products when purchasing lasers.   So, what about the quality of the laser? Today, RFH Laser Editor recommends a method to everyone: from the manufacturer's production process, especially the inspection process.
RFH 355 UV laser is used in food packaging laser marking machine
Ultraviolet laser has low thermal influence and high precision
Ultraviolet laser has low thermal influence and high precision
Ultraviolet laser has low thermal influence and high precision In the laser marking processing industry, laser equipment is the most important production tool, and the stability of laser equipment affects the efficiency of the entire factory. The laser is the core part of laser equipment. Therefore, laser equipment manufacturers pay special attention to the quality of their products when purchasing lasers.   So, what about the quality of the laser? Today, RFH Laser Editor recommends a method to everyone: from the manufacturer's production process, especially the inspection process.
Ultraviolet laser has low thermal influence and high precision
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact