10W-15W uv laser
Products
Home

Knowledge

 355nm UV laser cold light source engraves the surface of the mouse, showing individuality

engraves the surface of the mouse
engraves the surface of the mouse engraves the surface of the mouse engraves the surface of the mouse engraves the surface of the mouse engraves the surface of the mouse engraves the surface of the mouse engraves the surface of the mouse

355nm UV laser cold light source engraves the surface of the mouse, showing individuality

355nm UV laser cold light source engraves the surface of the mouse, showing individuality

 

The mouse is an accessory that is bound to be used during the use of the computer, and it is also a necessary accessory to facilitate the operation of the computer. At present, there are many different kinds of mice on the market, among which the colorful gaming mice are favored by many "Internet addicts", and many mice use the light-transmitting effect in order to show their individuality. So, how to process to make the mouse transparent?

  • Laser Wavelength:

    354.7nm

  • Average Output Power :

    3W-10W @30kHz

  • Pulse Width:

    <12ns @ 30kHz

  • Pulse Repetition Rate :

    10-200kHz

  • Beam Quality (㎡) :

    <1.2

  • Beam Diameter :

    0.8±0.2mm Measured at window

  • Beam Full Divergence Angle :

    <2mrad

  • Beam Circularity :

    >90%

  • Pulse-to-Pulse Stability :

    <2% RMS/@30kHz

  • Average Power Stability :

    <5% RMS/8hr

  • Beam-Pointing Drift :

    <30μrad/℃

  • Polarization Ratio :

    >100:1

  • Polarization Orientation :

    Horizontal

  • Operating Temp. & RH :

    10℃ to 30℃ | <80%

  • Storage Temp. & RH) :

    -20℃ to 65℃ | <90 %

  • Electricity Requirement :

    100-240VAC |50/60Hz | Single phase

  • Power Consumption :

    <500W

  • Warranty :

    18months
Inquire now
banner
  • Product Detail
  • Video

uv laser

 

355nm UV laser cold light source engraves the surface of the mouse, showing individuality

 

Website: http://www.rfhtech.com

Whatsapp(Wechat): 18928466502

Email: export06@rfhlasertech.com

 

The mouse is an accessory that is bound to be used during the use of the computer, and it is also a necessary accessory to facilitate the operation of the computer. At present, there are many different kinds of mice on the market, among which the colorful gaming mice are favored by many "Internet addicts", and many mice use the light-transmitting effect in order to show their individuality. So, how to process to make the mouse transparent?

 

How does the mouse transmit light, and see the knife skills of RFH UV lasers

 

RFH UV laser is an expert in this field. RFH UV laser is emitted by cold light source and non-contact processing is performed on the surface of the material. No matter which aspect, it can show the brilliance of the light-transmitting mouse to the greatest extent.

First of all, the RFH UV laser uses a 335nm spot, and the high-quality beam peels off paint or scratches the surface of the material. Does not leave very visible marks. Secondly, the thermal effect generated by the processing of the ultraviolet laser is basically zero, so that a huge laser beam will not be generated on the material during the high-speed movement on the surface of the material, which will cause the material to be scorched or damaged, resulting in increased costs and higher scrap rates. promote.

 

I have to praise the light transmission effect of RFH UV laser engraving mouse: stick

 

In addition, the speed of reaching the standard of the UV laser is very fast, and it can be used on the flying assembly line, which greatly improves the assembly line speed and guarantees the quality. Regular, fully in line with the highest requirements of the current market.

 

RFH UV lasers play an irreplaceable role in the production of light-transmitting mice. To a certain extent, they also drive the rapid development of this industry and contribute to the sustainable development of the light-transmitting mouse industry.

uv laser | green laser | Ultraviolet lasers | uv dpss laser | nanosecond laser | UV laser source | Solid State Lasers

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Related products
K-6 Integrated UV Laser 4W-6W
K-6 Integrated UV Laser 4W-6W-8W
K-6 series UV DPSS laser, developed and produced by RFH, covers 4W/6W/8W in laser power with short pulse width (<20ns@30K) ,superior beam quality (M²<1.2) and perfect laser spot quality (beam circularity >90%). K-6 series laser is ideal for high-end ultra-precise processing as well as marking in mobile phone shell , package of cosmetics, food, medicine and other high polymer materials, PCB, LCD, glassware surface, metal’s cladding material, plastic keypad, electronic component, gift, communication device, construction material and other areas.
Download datasheet
K-6 Integrated UV Laser 4W-6W
Learn More
Why RFH UV laser is often used in laser marking plastic button switch?
Why RFH UV laser is often used in laser marking plastic button switch
Why RFH UV laser is often used in laser marking plastic button switch? More and more manufacturers choose UV laser marking machine to create pattern and characters on the plastic button switch. The focal spot of UV laser is pretty small with little heat transfer to surrounding material, so UV laser is also called “cold light source”. Because of this feature, heat effect won’t occur. Thus, distorting or burning of materials is no longer an issue.    Professional UV laser manufacturer - Shenzhen RFH Laser Technology Co.,Ltd    With 13 years of experience, the S9 series nanosecond UV laser developed and produced by RFH can engrave clear characters on the keyboard and the mouse. These kinds of characters can not only help people identify different buttons in the dark but also last long, for there are slightly protruding part on the buttons. This improves the durability and practicability of the keyboard and the mouse.   
Why RFH UV laser is often used in laser marking plastic button switch?
Learn More
UV laser
UV laser featuring cold processing for marking plastic button on keyboard
 UV laser featuring cold processing for marking plastic button on keyboard More and more manufacturers choose UV laser marking machine to create pattern and characters on the plastic button switch. The focal spot of UV laser is pretty small with little heat transfer to surrounding material, so UV laser is also called “cold light source”. Because of this feature, heat effect won’t occur. Thus, distorting or burning of materials is no longer an issue.    Professional UV laser manufacturer - Shenzhen RFH Laser Technology Co.,Ltd    With 13 years of experience, the S9 series nanosecond UV laser developed and produced by RFH can engrave clear characters on the keyboard and the mouse. These kinds of characters can not only help people identify different buttons in the dark but also last long, for there are slightly protruding part on the buttons. This improves the durability and practicability of the keyboard and the mouse.   
UV laser
Learn More
green laser takes 0.2 seconds to mark the QR code of PCB circuit board
green laser takes 0.2 seconds to mark the QR code of PCB circuit board
RFH 532nm green laser matching 20W green laser marking machine It only takes 0.2 seconds to mark the QR code of PCB circuit board with 532nm green laser  532nm green laser has superior beam quality   Have you formulated your laser processing production plan for the new year? Do you plan to purchase or update your laser processing equipment? Today, the editor of RFH Laser recommends a green laser—RFH Excellent Ⅱ 532nm green laser (18W-35 W) to new friends in the industry. In the new year, it will be stable and dominate the laser marking market, it can help.  
green laser takes 0.2 seconds to mark the QR code of PCB circuit board
Learn More
532nm green laser matching 20W green laser marking machine
532nm green laser matching 20W green laser marking machine
RFH 532nm green laser matching 20W green laser marking machine It only takes 0.2 seconds to mark the QR code of PCB circuit board with 532nm green laser  532nm green laser has superior beam quality   Have you formulated your laser processing production plan for the new year? Do you plan to purchase or update your laser processing equipment? Today, the editor of RFH Laser recommends a green laser—RFH Excellent Ⅱ 532nm green laser (18W-35 W) to new friends in the industry. In the new year, it will be stable and dominate the laser marking market, it can help.  
532nm green laser matching 20W green laser marking machine
Learn More
532nm green laser has superior beam quality
532nm green laser has superior beam quality
RFH 532nm green laser matching 20W green laser marking machine It only takes 0.2 seconds to mark the QR code of PCB circuit board with 532nm green laser  532nm green laser has superior beam quality   Have you formulated your laser processing production plan for the new year? Do you plan to purchase or update your laser processing equipment? Today, the editor of RFH Laser recommends a green laser—RFH Excellent Ⅱ 532nm green laser (18W-35 W) to new friends in the industry. In the new year, it will be stable and dominate the laser marking market, it can help.  
532nm green laser has superior beam quality
Learn More
3W UV laser marking machine comes standard with RFH 355nm UV laser
3W UV laser marking machine comes standard with RFH 355nm UV laser
3W UV laser marking machine comes standard with RFH 355nm UV laser 355nm UV laser has longer life and higher accuracy Ultraviolet laser is the best choice for laser marking machine manufacturers   Recently, some pharmaceutical packaging manufacturers have consulted the RFH Laser Editor and asked if we can recommend some more stable 3W UV laser marking machine brands. Now the laser marking machine in the factory will be intermittent when working. Well, we have many customers, this is not recommended, but we can give you a plan to help you effectively screen for UV laser processing equipment that can work stably.
3W UV laser marking machine comes standard with RFH 355nm UV laser
Learn More
355nm UV laser has longer life and higher accuracy
355nm UV laser has longer life and higher accuracy
3W UV laser marking machine comes standard with RFH 355nm UV laser 355nm UV laser has longer life and higher accuracy Ultraviolet laser is the best choice for laser marking machine manufacturers   Recently, some pharmaceutical packaging manufacturers have consulted the RFH Laser Editor and asked if we can recommend some more stable 3W UV laser marking machine brands. Now the laser marking machine in the factory will be intermittent when working. Well, we have many customers, this is not recommended, but we can give you a plan to help you effectively screen for UV laser processing equipment that can work stably.
355nm UV laser has longer life and higher accuracy
Learn More
Get the latest offers Subscribe for our newsletter

Please read on, stay posted, subscribe, and we welcome you to tell us what you think.

As the leading industrial solid-state laser manufacturer, RFH laser company offer 355nm ultraviolet laser, 532nm green laser and customized laser for a broad range of commercial, industrial, and scientific applications.
Contacts
Copyright © 2026  The leading solid state laser manufacturer All Rights Reserved.
Sitemap | XML | IPv6 network supported
Leave A Message
Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact